Contents of this source
- Introduction
- Continuous coefficients and approachable potentials
- Metrics and Green identities on curves
- Restriction and an ambient extension
- Curve approximation and contact rigidity
- Envelopes on a fixed regular model
- Proof of local regularization
- Consequences for continuous potentials
- Comparison with adelic mixed measures
- A quantitative comparison of mixed measures
- Notation
- Declaration on the use of generative AI
Abstract
Let be a non-Archimedean completion of a number field and let be smooth and quasi-projective. A finite continuous function on an ordinary open of has positive Chambert–Loir–Ducros curvature current if and only if it admits smooth positive approximations on a fixed neighbourhood of each point. The proof combines restriction to curves, deterministic complete-intersection approximation, contact rigidity, and continuity of semipositive envelopes. Contact rigidity identifies a continuous curve-positive metric from its contact with a uniform Fubini–Study limit. On a fixed regular model, sums of divisor test ideals and global generation give one-sided Fubini–Study approximations for model-obstacle envelopes. A single projective extension then completes local regularization. As consequences, continuous current-positive potentials admit symmetric mixed products with any positive closed CLD current, and these products depend only on their curvature currents. We also obtain a projective curve criterion under a regular-model hypothesis and positivity of the prescribed Yuan–Zhang local mixed measures.
Introduction
Positivity of a Chambert–Loir–Ducros current is a condition on smooth test forms. To construct positive mixed products, one must also control for each intermediate positive closed current . Multiplication by a continuous potential is available, but positivity after differentiation requires an additional argument. Local approximation by smooth functions with positive curvature provides that argument. The first question addressed here is whether the current inequality itself supplies such an approximation.
Local regularization
Fix a number field , a non-Archimedean place , and , with its given absolute value. Its valuation ring is . Choose a uniformizer and set . All smooth forms, positive cones, and currents in this paper are those of the first version of Chambert–Loir–Ducros [3]. In particular, positivity of currents is dual to the positive cone of [3, Definition 5.1.1(c)]. An ordinary open is open in the Berkovich topology.
Let be smooth of pure dimension , let be an ordinary open, and let be finite and continuous. For , the condition means
Every compactly supported smooth test is allowed. For components of different dimensions the condition is imposed componentwise, and there is no curvature condition in dimension zero.
We write if every has one ordinary neighbourhood on which there are smooth functions with as forms and uniformly on compact subsets of . The neighbourhood is fixed for the entire sequence.
Theorem (Local regularization). Let be a non-Archimedean completion of a number field, with its given absolute value. Let be smooth and quasi-projective, an ordinary open, and finite continuous. Then the following are equivalent:
The original CLD curvature current is positive on in the sense of (
eq:current-positive).The function belongs to .
After shrinking the fixed neighbourhood of each point once, the approximating sequence can be chosen decreasing and uniformly convergent on that neighbourhood.
The implication from smooth positive approximation to current positivity follows by testing locally uniform convergence against . The reverse implication does not assume that is a difference of approachable functions. The field and continuity hypotheses remain in force throughout the theorem; in particular, the assertion does not concern arbitrary upper-semicontinuous potentials. The proof is completed in Section “Completion of the proof”.
Contact rigidity
The projective argument uses a criterion that identifies a metric from its contact with a semipositive lower metric. Recall that a pure Fubini–Study metric on an ample line bundle is given by weights , where the sections generate . A uniform FS limit is a uniform limit of such metrics. A continuous metric is curve-positive if its pullback by every algebraic morphism from a smooth -curve has positive Chern current. These conventions are developed in Section “Metrics and Green identities on curves”.
Contact rigidity 1 (Theorem “Contact rigidity”). Let be smooth, projective, and integral of dimension , and let be ample. Let be a uniform FS limit on , and let be a finite continuous curve-positive metric on . Then
The metric need not be constructed as an envelope of . The criterion uses the Monge–Ampère measure of the lower metric and positivity of the upper metric only on curves. It therefore applies before a higher-dimensional positive product for is available. The proof in Section “Contact rigidity” passes curve Green identities through complete-intersection approximation and then transfers the contact identity to smooth divisors.
Continuous mixed currents
A current is called closed below if both and . Positive currents admit multiplication by continuous functions (Lemma “Continuous coefficients”). Thus, for a positive closed current , the recursive rule
is meaningful whenever its intermediate currents are positive. This is the usual Bedford–Taylor construction.
Theorem (Continuous potentials on a positive closed background). Let , let be smooth quasi-projective of pure dimension , and let be an ordinary open. Let be an original CLD positive current of bidegree , where , with . Suppose and are finite continuous functions with . Then (eq:recursive-product) defines a positive closed current of bidegree . It has the following properties.
It is local, symmetric in the potentials, additive and positively homogeneous in each potential and in the background.
If on every compact smooth test, where all are positive and closed of bidegree , and the finite continuous functions converge to locally uniformly with , then on every compact smooth test.
Each potential enters only through its curvature current: if is finite continuous and , replacing by leaves the product unchanged.
In top degree the product is a positive Radon measure.
The recursion is described in [3, Section 5.6.8]. For continuous psh potentials, its positivity, continuity, and symmetry are established in [10, Lemma 8.5.5 and Propositions 8.7.2, 8.7.4]. Theorem “Local regularization” allows us to start from current positivity alone. Potential independence then has a short two-sided proof. If , then both and satisfy Theorem “Local regularization”. For every positive closed this gives
No representation of as a piecewise-linear or logarithmic function is required. Theorem “Continuous potentials on a positive closed background” concerns continuous potentials; it does not assert a monotone convergence theorem for bounded discontinuous ones. The theorem is proved in Section “Proof of the mixed-current theorem”.
Adelic mixed measures
For the arithmetic application, use the rational boundary completion of [9, Sections 2.4–2.5]. Its objects retain the specified line-bundle identifications. A strongly nef object has a Cauchy presentation by nef model objects, and an integrable object is a difference of two strongly nef objects, with rational tensor powers allowed. The order defining the completion compares the full Cartier-and-metric boundary datum, as recalled in Section “Comparison with adelic mixed measures”.
Theorem (Positivity of the prescribed adelic mixed measure). Let be a number field, a non-Archimedean place, and . Let be smooth quasi-projective of pure dimension . Let be rational integrable adelic line bundles with their specified identifications in the boundary completion of [9, Sections 2.4–2.5]. Suppose their local weights at are finite continuous and have positive original CLD curvature currents. Then the signed measure prescribed in [9, Sections 3.6.7–3.6.8] is positive:
The signed measure is defined by expanding integrable presentations. Its positivity follows by identifying that expansion with the local positive product of the target weights. This conclusion concerns the given measure and does not assert arithmetic nefness of the factors. The comparison is given in Section “Identification and positivity of the prescribed measure”.
Relation to earlier work
Chambert–Loir–Ducros distinguish distributional positivity from local psh approachability in [3, Definition 5.6.3 and Remark 5.6.4]; their stable products are treated in [3, Corollary 5.6.5 and Section 5.6.8]. The later continuous psh class is defined by uniform closure [10, Definition 8.1.7]. We do not identify a continuous current-positive function with a member of that class before proving Theorem “Local regularization”.
On curves, Wanner compares CLD and Thuillier subharmonicity [11, Corollaries 4.8 and 5.4]. Gubler–Jell–Rabinoff provide descent, harmonic tropicalizations, and smooth approximation [4, 5]. The finite residue field is important here: weakly smooth functions on the relevant curves are CLD-smooth. Section “Metrics and Green identities on curves” retains the passage from the original current inequality over to those curve results.
Torus-invariant pluripotential theory is developed in [12]. Piecewise-linear semipositivity and positivity tested on curves are studied in [14, 15], and Wu compares local approximation classes in [16, Appendix A]. Our starting hypothesis is instead the original current inequality (eq:current-positive) for an arbitrary finite continuous potential on a smooth variety.
The envelope argument follows the test-ideal method of Fang–Gubler–Künnemann [13], using the mixed-characteristic test ideals of [6]. We use test ideals of section divisors directly. The comparison on a higher normal model allows an obstacle on a higher normal model while subadditivity is applied on a fixed regular model. It is not a direct application of [13, Theorems 5.1 and 7.1]. Orthogonality, once continuity is established, is [8, Theorem 6.7]. The final adelic application identifies a measure already constructed by Yuan–Zhang; it does not introduce another mixed measure.
Proof strategy
The proof separates restriction, contact, and envelopes so that none uses regularization in a form still to be established.
Step 1: restrict the current inequality and extend locally. In a normal disc, let , where is a smooth convex regularized maximum. For the zero section , Poincaré–Lelong and continuous multiplication give
Testing against pullbacks from proves positivity on the zero section. The étale normal form of a smooth pair and Berkovich’s theorem on étale germs then give restriction to smooth subvarieties. Curve regularization and removal of finitely many closed points prove positivity after every algebraic curve map. An algebraic étale presentation also supplies an ambient analytic retraction, extending to a continuous curve-positive function near the original point (Section “Restriction and an ambient extension”).
Step 2: approximate mixed currents by curves and prove contact. For a generating tuple , choose smooth cuts of the form On a tropical presentation of any fixed smooth test, equality of the norms of two terms lies on an affine hyperplane, apart from finitely many exceptional . Distinct coefficient valuations exclude ties that persist for all . Absolute tropical integration therefore gives an eventual error on that test. Successive cuts and weak closure yield normalized individual smooth complete-intersection curves, with fixed intersection degrees (Proposition “Complete-intersection approximation”).
For the contact criterion (eq:contact-intro), put and . Passing curve Green identities through the approximation of gives The nonnegative energy of , for smooth and , then forces . For a smooth divisor in , set . Fixed-potential continuity gives
Green symmetry transfers contact to , and induction on dimension proves (eq:contact-intro) (Section “Curve approximation and contact rigidity”). No mixed product with the upper metric is assumed in this argument.
Step 3: construct continuous envelopes on a fixed regular model. Represent a model obstacle on a higher normal model as , with an invertible vertical ideal. For each admissible section , let be its divisor on a fixed regular model . We take the sum Subadditivity gives the lower bound below. Birational comparison, followed by clearing a fixed discrepancy denominator, gives the upper bound:
Global generation and one fixed auxiliary line bundle turn these bounds into pure-FS approximations of on . On , the identity cancels the auxiliary twist directly and gives
Model-metric density and the one-Lipschitz property of the envelope treat continuous obstacles. Orthogonality [8, Theorem 6.7] then applies (Section “Uniform approximation and orthogonality”).
Step 4: extend once to projective space and apply contact rigidity. After adding a constant and shrinking the ambient neighbourhood, arrange . Choose one compact polynomial norm box and an FS metric , with a section , such that On , use the weight ; on , use . The two definitions agree on the overlap and give a global curve-positive metric (Lemma “Projective extension”). Its envelope satisfies the contact identity, so Theorem “Contact rigidity” gives . Smooth FS approximation and restriction to one fixed neighbourhood recover . Explicit constant translations make the approximants decreasing (Section “Completion of the proof”). The same envelope–contact argument gives the projective curve criterion under the retained regular-model hypothesis (Corollary “A projective curve criterion”).
Organization
Section “Continuous coefficients and approachable potentials” proves the continuous-coefficient estimate and the continuity of a fixed approachable potential acting on positive closed currents. Section “Metrics and Green identities on curves” supplies smooth Fubini–Study approximation, the measure normalization, and the Green identities on curves. Section “Restriction and an ambient extension” establishes restriction and the ambient extension. Section “Curve approximation and contact rigidity” combines complete-intersection approximation with the direct divisor limit to prove contact rigidity. Section “Envelopes on a fixed regular model” proves envelope continuity on a fixed regular model, with projective space as a corollary. Section “Proof of local regularization” constructs the projective extension and completes local regularization. The mixed-current and curve-criterion consequences are proved in Section “Consequences for continuous potentials”; Section “Comparison with adelic mixed measures” identifies the prescribed adelic measure. Appendix “A quantitative comparison of mixed measures” records a quantitative comparison of mixed measures, independently of the contact argument.
Continuous coefficients and approachable potentials
We use the smooth cutoff and density results [3, Corollary 3.3.4 and Propositions 3.3.5–3.3.6], the Poincaré–Lelong formula [3, Theorem 4.6.5], and uniform stability of products [3, Corollary 5.6.5]. Weak convergence of currents always means convergence on every compactly supported smooth test. Convergence of measures on continuous tests will be stated explicitly.
Definition. On an ordinary open , a smooth function is locally of the form where the are analytic units and is smooth near their logarithmic image. The class is defined in Section “Introduction”. We write if is locally a difference of two members of . For metrics, these conditions apply to their weights in local frames. The weight in a frame is .
A change of frame changes a weight by the logarithm of the norm of an analytic unit. That function is smooth and has zero . Continuous multiplication of positive currents is known from [3, Corollary 5.4.7] and [10, Lemma 8.5.1]. We give the coefficient construction because it also controls weakly convergent nets.
Lemma (Continuous coefficients). Let be an ordinary open in a smooth pure -dimensional -variety. Let be positive currents of bidegree , , converging weakly to . Then is positive. For and for each , every finite continuous determines a unique current by where is any compactly supported smooth test and are smooth functions converging uniformly to near . The limit exists and is independent of the choice of .
On a fixed compact test chart, the scalar coefficient measures of have eventually uniformly bounded total variations. The same holds after wedging with any fixed smooth form, in the bidegrees where the wedge is defined. The cone of positive currents is pointed. If locally uniformly, with finite continuous, then
on every compact smooth test. Nets are allowed.
Proof. Positivity of follows by taking the limit on each positive test. We establish the coefficient estimate locally and then use a finite smooth partition. Fix a moment chart with moment coordinates, a compactly supported -form , and a nonnegative smooth cutoff equal to one near its support. Let denote the involution interchanging the two differential factors, and write Wedging with , for an -form , gives zero. In the convention [3, Definition 5.1.1(c)], both signs of are therefore positive. A positive current annihilates , also after multiplication by a smooth real scalar.
For symmetric forms the positivity test is a finite-dimensional positive-semidefinite matrix condition. The form has a positive-definite coefficient matrix. Boundedness of the coefficient matrix of on the fixed compact set gives such that, for every smooth real , If uses additional moment coordinates, pull this inequality to a common refinement; positivity is preserved. The forms extend by zero outside the chart. For or , we obtain
At this stage is smooth, so the pairing is already defined.
The right-hand evaluations for converge and are eventually bounded. Apply (eq:coefficient-estimate) to the finitely many coordinate test forms. Their scalar functionals extend uniquely to continuous compactly supported functions, and the Riesz theorem represents them by signed Radon measures. The same estimate bounds their total variations. These extensions agree on overlaps by uniform smooth density. On a fixed test stage is bounded by a constant times the supremum norm of the coefficient matrix, so the extended functionals define currents.
We can now define , for or , by multiplying these coefficient measures by . Smooth density supplies the functions in the statement; estimate (eq:coefficient-estimate) proves that their pairings converge to this product independently of the approximation. The same local estimate proves continuity on each smooth test stage.
For fixed continuous , choose smooth uniformly on an enlarged compact set. For an eventually uniform , First fix , let tend to its limit, and then let increase. This proves . For varying , the additional term satisfies A finite partition treats any compact test. The coefficient bounds also control wedges with a fixed smooth form, whose coefficients are bounded on compact charts. Finally, if both and are positive, their evaluations on vanish; applying (eq:coefficient-estimate) to gives . ◻
Proposition (A fixed approachable potential). Let be a positive current on with , and let . Whenever the bidegrees permit it, is positive and closed. For fixed , the operation is continuous on the cone of positive closed currents for weak convergence. The same is true jointly when locally uniformly and all belong to . Successive such operations are symmetric in their potentials.
Proof. On a fixed smaller neighbourhood choose smooth with . Closedness gives The curvature is a symmetric positive -form, hence strongly positive, so its wedge preserves positivity. Lemma “Continuous coefficients” and continuity of differentiation give the positive limit . Both differentials annihilate this limit. Equation (eq:moving-coefficients) proves the two continuity assertions. Induction gives joint continuity for successive operations. Simultaneous smooth positive approximations of finitely many potentials then give symmetry from the smooth wedge product. ◻
For a continuously metrized line bundle with approachable weights, write for this operation in local frames. The local definitions agree because a transition logarithm is smooth, , and .
Metrics and Green identities on curves
Fubini–Study metrics and normalization
Definition. Let be an ample rational line bundle on a projective . A pure Fubini–Study metric on is defined by an integer , with an actual line bundle, and a generating tuple . Its weight in a local frame is Coefficients multiplying the sections belong to . A uniform FS limit is a uniform limit of these metrics. A metric is globally smoothly approximable if it is a uniform limit of global smooth metrics with positive curvature forms.
A model metric is nef if, after clearing tensor denominators, its model line bundle has nonnegative degree on every integral curve of the special fibre. A continuous metric is semipositive if it is a uniform limit of nef model metrics. For an ample rational line, this is equivalent to being a uniform pure-FS limit [7, Corollary 7.6 and Theorem 7.8]. All uniform differences of metrics are scalar differences on the same specified line bundle.
We use the standard regularized maximum from [3, proof of Proposition 6.3.2].
Proposition (Regularized maximum). Fix an even nonnegative function , supported in , with integral one. For and , put This function is smooth, convex, and nondecreasing in each variable. It satisfies An entry more than below the maximum is inactive on a neighbourhood of that point. If smooth have positive curvature, so does .
Translation covariance gives the metric transition law, and the inactive-coordinate property handles zeros of the generating sections. These are precisely the features needed in the next lemma.
Lemma (Smooth approximation of FS metrics). A pure-FS metric, and hence a uniform FS limit, is globally smoothly approximable. If is globally smoothly approximable on , if is an integer for which is a line bundle, and if , then for each the metric on is globally smoothly approximable.
Proof. For a pure-FS metric from sections of , pull back the smooth positive approximations of the canonical metric on from [3, Proposition 6.3.2], and divide their weights by . A diagonal choice treats uniform FS limits.
The second assertion is immediate for . Otherwise, take smooth positive and regularize . The logarithmic entry is inactive near the divisor of ; elsewhere it is smooth with zero curvature. The resulting global metrics are positive and have error at most . This is the same regularized-maximum construction, applied to a smooth weight and a section weight. ◻
Lemma (Degree and comparison of measures). On a smooth projective of dimension , globally smoothly approximable metrics on have total mixed mass . For uniform FS limits, the model-theoretic mixed measure agrees with the CLD product.
The mass assertion is [3, Corollary 6.4.4]. The model comparison is [3, Theorem 6.9.3 and Proposition 6.9.7], with the discretely valued normalization of [3, Section 6.9.6]. For uniform FS limits, use uniform continuity of the model measures [8, Proposition 2.23(d) and Remark 2.24] and of the approachable CLD products. Rational tensor denominators are cleared and divided on both sides.
Degrees in this paper are over the stated ground field. A variety over a finite extension , regarded as a -variety, contributes the structural factor to intersection and integration. Indeed, a moment map followed by has that degree. This operation is distinct from scalar extension of a -variety: the normalized scalar-extension integration formula used next has no extra degree factor.
Definition. A continuous function on an ordinary algebraic analytic open is curve-positive if its pullback by every algebraic morphism from a smooth -curve has positive CLD curvature current on the inverse-image open. For a continuous metric the same condition is imposed on the pulled-back line bundle. Curves may be disconnected. The definition uses algebraic curve maps over the given ; it does not build positivity after arbitrary field extension into the hypothesis.
Regularization and energy in dimension one
Proposition (Curve regularization). Let be a smooth algebraic curve and an ordinary open. A finite continuous CLD-positive function on belongs to . A finite continuous function with zero Laplacian on a connected proper smooth curve is constant.
Proof. For a finite Galois extension , average a nonnegative compact smooth scalar test on over the Galois group. The invariant average descends by [4, Proposition 14.2]. It is smooth because weakly smooth and CLD-smooth forms coincide on these curves [4, Remark 15.10]: their residue fields are algebraic over a finite field. If is the descended test, the scalar-extension integration formula [4, Proposition 14.5] gives Uniform smooth density permits the continuous coefficient . Consequently current positivity passes to finite Galois extensions.
Let be a compact strictly affinoid curve domain inside . After such an extension choose a semistable skeleton with retraction , edge lengths, and positive weights . For an edgewise smooth , constant near vertices and zero near boundary vertices, , extended by zero, is a compact smooth test. Its Laplacian has no vertex atoms, and integration on the annular edges gives
This is also the retraction comparison [5, Proposition 6.3.2]; it does not assume that factors through .
Tests inside an edge show that is convex. The positive Radon measure has finite mass on the compact domain. Thus its edge second derivatives have finite mass and finite one-sided derivatives at the endpoints. Integration by parts in (eq:curve-skeleton), allowing arbitrary constants near the interior vertices, gives a nonnegative weighted sum of outgoing slopes at each such vertex. The finite-graph maximum principle therefore applies to .
To pass from graph inequalities to subharmonicity, we follow the harmonic-comparison argument of [11, Theorem 4.7]. A harmonic comparison function becomes skeletal after semistable refinement [4, Section 15.6 and Proposition 15.7]. Its boundary comparison with holds on that skeleton. Any prescribed finite set of type-II points can be included in a refinement after a further finite Galois extension [5, Remark 5.4.2]. The boundary and harmonic compatibilities are [5, Lemma 5.4.1 and Proposition 5.6.8]. Density of these points and continuity prove harmonic comparison on all of . Hence is Thuillier-subharmonic.
By [4, Proposition 15.11], has a decreasing net of weakly smooth psh approximants on a fixed relatively compact open. They are CLD-smooth by the finite-residue-field comparison. On a smaller compact neighbourhood, Dini’s finite-cover argument selects a uniformly convergent sequence. On a curve, positivity of the curvature current of a smooth function implies positivity of its curvature form: a negative coefficient on an open one-dimensional tropical cell is detected by a nonnegative scalar test there; continuity handles faces. This proves approachability.
For a zero-Laplacian function on a proper curve, (eq:curve-skeleton) makes its restriction to every refined skeleton harmonic. A harmonic function on a connected compact graph without boundary is constant. Refinement through arbitrary type-II points and descent give the final assertion. ◻
The smooth Green identity is [3, Theorem 3.12.2]. We extend it and the smooth chain rule to the continuous gaps below using curve regularization and bounded Laplacian variation.
Lemma (Green identities on curves). Let be finite continuous metrics with positive Chern currents on the same rational line on a smooth proper curve . Their gap has smooth approximants uniformly with . The two Chern measures have mass , so .
On every finite real span of such gaps and smooth functions,
Moreover, is a positive measure of mass , and for every smooth real defined near the range of . If , then and is constant on each connected component.
Proof. In finitely many fixed frame neighbourhoods, use Proposition “Curve regularization” to approximate the weights by smooth subharmonic . For a compact in one such neighbourhood, choose a nonnegative smooth cutoff near . Then This bounds the local Laplacians of . For a compactly supported , the square identity gives so the local energies are bounded as well.
Take a finite smooth partition and set . Cauchy–Schwarz for integration on the curve bounds the cross terms by where near . The product rule therefore gives the uniform global variation bound.
The mass formula is [10, Corollary 18.1.7]. Uniform convergence and the variation bound imply weak convergence of on continuous tests and The cited smooth Green formula and pass to the limit. The latter positive measures have convergent masses. The smooth chain rule passes as well. Choosing approximations simultaneously proves these assertions on a fixed finite span . If , the positive measure is zero. The nonnegative quadratic , for smooth and arbitrary , has zero linear coefficient. By Green symmetry, for every such . Thus , and Proposition “Curve regularization” gives constancy. ◻
Restriction and an ambient extension
Restriction of a current to a subvariety is not a formal operation. For continuous potentials it follows from a positive kernel in the normal direction.
Lemma (A normal kernel). Let be an ordinary open in the analytification of a smooth -variety of pure dimension , let , and let be the zero section. For a fixed , put Then, for every finite continuous on the product, as currents. In particular, implies .
Proof. The form is smooth and strongly positive, with support in The logarithm is locally integrable. Dominated convergence and Poincaré–Lelong give , with multiplicity one. Lemma “Continuous coefficients” permits the fixed multiplier . For a positive , is a positive compact test for large . Indeed, its support lies above a fixed compact subset of and inside a fixed closed normal disc. Thus Fixed base and normal cutoffs make the middle expression a compact test pairing without altering it. ◻
Lemma (A local product neighbourhood). Let be a closed immersion of smooth -varieties, let , and let be the codimension near . There are ordinary neighbourhoods and , a radius , and an analytic isomorphism whose zero section is . Consequently restriction of a finite continuous positive potential along preserves current positivity.
Proof. Use the étale local form of a smooth pair [2, Lemma 37.17.1, Tag 0FUE]. After Zariski shrinking there is an étale map where and is étale. Form . The two maps are étale by base change. At the diagonal point above , both induce the identity on the completed residue field . Berkovich’s equivalence for étale germs [1, Theorem 3.4.1] therefore makes both analytic germs isomorphisms. By the definition of these germs [1, Section 3.4], they are represented by isomorphisms of ordinary open neighbourhoods. Their composition identifies a neighbourhood of in with an ordinary open , matching with the zero section.
Choose a compact affinoid neighbourhood of in whose zero section lies in . In the product of with a fixed closed normal polydisc, the complement of is compact and disjoint from the zero section. If nonempty, it has a positive minimum of . Choose smaller than the initial polydisc radius and, when the complement is nonempty, smaller than that minimum. Then , where . Its image is the required ordinary open . Finally apply Lemma “A normal kernel” in each normal coordinate; a zero-dimensional target has no curvature condition. ◻
Proposition (Curve maps and extension). Let be a finite continuous CLD-positive function on an ordinary open , where is smooth. Then:
For every algebraic morphism from a smooth -curve, is CLD-positive on .
Near each point of , an affine embedding of has a finite continuous curve-positive ambient extension of .
Proof. Argue componentwise. For a nonconstant map the algebraic image is a curve. Away from its finitely many singular points, Lemma “A local product neighbourhood” restricts to the smooth image. Proposition “Curve regularization” supplies smooth positive approximations, whose pullbacks prove positivity on the source outside finitely many closed points.
Continuity removes each such point . A sufficiently small neighbourhood is a disc over , viewed over . Choose , equal to one near , with supports shrinking to , by translating one smooth profile in . Then The bound contains only the fixed structural degree . A smooth scalar is constant near , since each of its finitely many analytic unit norms is constant there. For large , Apply positivity off to . Constant curve maps pull back to a constant.
For the extension, choose affine coordinates of an embedding , with étale. The algebraic morphism is étale: after translating the second coordinate it is a base change of . At , the map induces an isomorphism of completed residue fields. The same germ theorem [1, Theorem 3.4.1] gives an analytic inverse branch on one ordinary ambient open. This branch agrees with the diagonal on . Shrinking so that takes values in , set . For any smooth algebraic curve mapping to the ambient affine space, the fibre product with is a smooth algebraic curve. Its map to is covered by the first part, and the inverse branch identifies the relevant ordinary curve open with an open of that fibre product. Thus is curve-positive over . ◻
Curve approximation and contact rigidity
We first approximate the mixed currents of approachable metrics by algebraic curves. The coefficients are chosen over the original field , and the normalized intersection degrees remain fixed. These degrees supply the variation bounds needed to pass the curve Green identities to a higher-dimensional mixed current.
Complete-intersection approximation
Proposition (Complete-intersection approximation). Let be smooth projective of dimension . For , let be a uniform FS limit on an ample rational line bundle . Then is a weak limit, on all compact smooth tests, of individual normalized smooth complete-intersection curve cycles defined over . For every line bundle , each has normalized -degree .
Proof. Step 1: a smooth cut with prescribed coefficient valuations. Let be smooth projective of pure dimension . First consider an ample line bundle generated by , with FS weight . For every , choose
so that is smooth. Such a choice exists: the pure powers have no common zero, and characteristic-zero Bertini gives a nonempty Zariski-open smooth locus in their coefficient space. The product is Zariski dense, since a nonzero polynomial cannot vanish on a product of infinite subsets of . If has several components, impose the finitely many smoothness conditions simultaneously. These choices are made independently of all test forms.
Step 2: ties have zero mass for each smooth test. Fix a smooth -test on , and let be the signed measure defined by . On each component, discard the generators that vanish identically, retaining the original indices . By [3, Lemma 3.2.5], the compact support of avoids the zero divisors of the remaining generators. Cover it by finitely many compact moment charts, refined by the unit ratios . On each cell of the resulting finite polyhedral complexes, the functions are affine.
The absolute-value tropical integration formula [3, Section 3.7 and Proposition 3.7.2] implies that gives zero mass to inverse images of proper affine hyperplanes in the -dimensional cells; lower-dimensional cells carry no top-degree mass. Equivalently, on each compact chart one can dominate both signs of its Lagerberg representative by a positive top form and apply [4, Proposition 11.1(3)]. This is a statement about total variation, not just about the signed pushforward.
Since , two summands in (eq:deterministic-section) have the same norm exactly when If is nonconstant on a top-dimensional cell, this is a null hyperplane. If it is the constant , the equality is impossible for and holds for at most one positive integer when . There are finitely many cells and pairs. Thus, for all sufficiently large , the largest summand is unique at -almost every point.
Step 3: the one-cut estimate. Put . Unique dominance in the ultrametric inequality gives for all sufficiently large . Poincaré–Lelong therefore gives
Here the threshold in depends on , but the chosen sequence does not. The formula is interpreted intrinsically on , or after pushforward to . It proves one-cut convergence on every original smooth test. The bound is a statement about integration against : is unbounded along . The argument does not give the same estimate against an arbitrary positive background current, whose coefficient measures may charge the tie loci.
Step 4: successive cuts and uniform limits. For pure-FS metrics , let the generating tuple lie in , and put . At the -th cut, restrict that tuple to the preceding smooth intersection and apply Steps 1–3. Its divisor has class , and its current is divided by . The Bertini conditions can also be imposed on the ambient divisors.
For clarity, let be the currents of these smooth codimension- complete intersections, normalized by , with . The one-cut limit places in the weak closure of for every . Continuity in the positive background (Proposition “A fixed approachable potential”) then gives inductively Indexing a weak neighbourhood by finitely many smooth tests and an error tolerance gives the asserted net of individual curves. Each member has normalized -degree Finally, approximate the uniformly by pure-FS metrics and take the union of the corresponding families over all approximating tuples and tensor degrees. Every member is still an individual normalized smooth complete intersection with the displayed degree. Joint continuity in Proposition “A fixed approachable potential” puts the limiting mixed current in the weak closure of this union. ◻
Concentration on a divisor
The next limit uses only continuity in the positive background. In particular, the other metrics remain fixed while the truncated section metric tends to its divisor current.
Lemma (Concentration on a smooth divisor). Let be smooth projective of dimension , and let define a smooth effective Cartier divisor in a line bundle . Let be globally smoothly approximable metrics on , respectively. Then
as , on every continuous scalar test on .
Proof. Put , which is smoothly approachable by Lemma “Smooth approximation of FS metrics”. In a local frame, . Local integrability and Poincaré–Lelong give . Apply the fixed-potential continuity of Proposition “A fixed approachable potential” in the remaining slots. The projection formula for approachable products [10, Proposition 8.7.5] identifies the limit with the right-hand side of (eq:divisor-limit). All measures are positive and have the common mass , by Lemma “Degree and comparison of measures”. Uniform smooth density extends convergence to continuous tests. ◻
Contact rigidity
The following criterion compares two metrics on the same ample line. Only the lower metric is assumed to be a uniform FS limit; the upper metric is tested on algebraic curves. The proof uses the preceding curve approximation and divisor limit, independently of envelope continuity.
Theorem (Contact rigidity). Let be smooth, projective, and integral of dimension , and let be ample. Let be a uniform FS limit on , and let be a finite continuous metric on whose pullback by every morphism from a smooth algebraic -curve has positive Chern current. If then .
Proof. Step 1: pass from curves to mixed measures. Put For , approximate by the normalized smooth curve cycles of Proposition “Complete-intersection approximation”; for , take . The pullbacks of and to each curve have positive Chern measures. Their normalized pushforwards have mass , and By Proposition “A fixed approachable potential”, . Lemma “Continuous coefficients” gives on smooth tests. The variation bounds extend these limits to continuous scalar tests. Thus , where is a positive measure of mass .
Step 2: use zero energy to annihilate the mixed Laplacian. We pass the curve Green identities of Lemma “Green identities on curves” to the limit. For a fixed smooth function , Lemma “Continuous coefficients” bounds the total variations of : a finite collection of local positive test evaluations bounds the fixed coefficient form . Consequently,
All integrals are over . The contact assumption implies The quadratic polynomial in from (eq:contact-energy) therefore has zero constant term. Green symmetry writes its linear term as . Nonnegativity for every forces that coefficient to vanish. Since this holds for every smooth , we have .
If is any finite continuous curve-positive metric on , set . Its normalized curve Laplacians have variations at most . The same passage of Green symmetry, now for the two continuous gaps and , gives
Only products with the approachable lower metric have been used; the upper metric enters through its curve restrictions.
Step 3: restrict the contact identity and argue by dimension. When , Lemma “Green identities on curves” and the zero energy already proved make constant. Its integral against the positive measure of mass makes that constant zero. Suppose and proceed by induction. Fix a closed point . For sufficiently large , choose a smooth in through . To impose this condition, use : for it is generated away from and realizes arbitrary first jets at . A nonzero first jet ensures smoothness there, and characteristic-zero Bertini ensures smoothness elsewhere. The nonempty open conditions admit a -rational choice since is infinite.
Set . These metrics are smoothly approximable by Lemma “Smooth approximation of FS metrics”, hence curve-positive. Equation (eq:contact-green), together with , yields Lemma “Concentration on a smooth divisor” now gives The integrand is nonnegative. It therefore has zero integral on each smooth integral component of . The curve condition passes to that component by composition, is ample, and is a uniform FS limit by restriction of the generating tuples. Induction gives . Closed points give a dense set of rigid points of ; continuity implies everywhere. ◻
Envelopes on a fixed regular model
For an ample line bundle on a projective -variety and a continuous metric , set
We use the standard finiteness, translation, scaling, and monotonicity properties of this envelope [8, Remark 6.2 and Proposition 6.3]. In particular,
The envelope is not assumed continuous at this stage.
Test ideals of admissible section divisors
Let be regular, integral, projective and flat, with smooth generic fibre of dimension . Extend to a line bundle on , and write for its model metric. Such an extension exists because the closure of a generic Cartier divisor is Cartier on the regular scheme . After clearing a fixed tensor denominator and adjusting the reference identification by a power of , a model metric can be written
where is a normal projective model inducing the identity on , and is an effective vertical Cartier divisor. Put .
Proposition (The test-ideal estimate). There are coherent vertical ideals , for , and an integer , independent of , such that
For every globally generated ample Cartier divisor on ,
Proof. For , let Since , every member of is a section of on . Normality also gives
Indeed, a generic section has no horizontal poles, while the norm inequalities at vertical divisorial points are exactly the remaining codimension-one extension conditions on . For , denote its effective divisor on by . Then Define
This sum equals a finite subsum by Noetherianity. For a sufficiently large , a generating tuple of can be scaled into . At every point of one of these sections is nonvanishing. Generic-fibre comparison with multiplier ideals [6, Corollary 7.21(e)] therefore shows that . Thus is vertical.
Lower bound. Write . This fixed ideal contains a power of , since its generic restriction is . Cartier translation and subadditivity on the regular scheme give, for every ,
Here we use [6, Proposition 7.16(b) and Theorem 7.22(e)]. Taking logarithmic norms, dividing by , and letting yields If a pure-FS metric lies below , its defining sections belong to the corresponding by (eq:weighted-unit-ball); taking their maximum gives . Every continuous semipositive competitor below is a uniform limit of pure-FS metrics shifted down by constants in tending to zero [7, Corollary 7.6 and Theorem 7.8]. The lower bound in (eq:test-ideal-bounds) follows.
Upper bound. Choose compatible canonical divisors and set . The fractional test ideal is defined because is Cartier [6, Definition 7.20]. Birational inclusion, monotonicity, and Cartier translation give
The cited properties are [6, Proposition 7.16(a),(b) and Theorem 7.22(d)]. The fixed fractional ideal on the right is coherent and restricts to . A single power clears its denominators on a finite affine cover of . Summing (eq:birational-bound) gives , and hence the upper bound.
Global generation. Each effective boundary is -linearly equivalent to . For , one has . Since the special fibre has dimension , [6, Corollary 7.24] makes globally generated. A finite subsum in (eq:divisor-sum) proves (eq:test-ideal-generation). ◻
Uniform approximation and orthogonality
Theorem (Envelopes on a regular model). Let be regular, integral, projective and flat, with smooth generic fibre of dimension , and let be an ample rational line bundle on . For every finite continuous metric on , the envelope is continuous, is a uniform limit of pure-FS metrics, and satisfies
Here the measure is the CLD product. For a model obstacle, after clearing fixed tensor denominators, there are pure-FS metrics , for all sufficiently large integers , such that
where depends on the obstacle and the fixed auxiliary data.
Proof. If , then for a finite extension , and is a point. In a fixed frame, weights of pure-FS metrics include , so every continuous metric is semipositive and . A model metric is pure-FS after clearing its fixed tensor denominator, which also gives the stated approximation. Assume henceforth that .
First treat a model obstacle in the form (eq:model-obstacle). Choose a globally generated ample divisor sufficiently positive that is ample and globally generated. Put , and let be its model FS metric. Choose such that is very ample and a pure-FS metric defined by a generating tuple on that line bundle. Multiplying this tuple by a sufficiently large negative power of , arrange that By Proposition “The test-ideal estimate”, the generators of define a pure-FS metric Tensoring with the tuple defining gives a pure-FS metric on , Consequently, The semipositive metric lies below , hence below . Thus These metrics are represented by generating sections in degree . Relabeling proves (eq:regular-model-approximation). A fixed tensor denominator is divided out using .
For a continuous obstacle, use uniform density of model metrics [7, Proposition 5.16(vi) and Theorem 5.18]. Equation (eq:envelope-lipschitz) shows that their envelopes converge uniformly to , and a diagonal choice gives pure-FS approximation. Finally, is geometrically reduced, so [8, Theorem 6.7] gives (eq:regular-model-orthogonality). Lemma “Degree and comparison of measures” identifies its measure with the CLD product. ◻
Corollary (Projective space). Let and . The conclusions of Theorem “Envelopes on a regular model” hold for every continuous metric on . For a model obstacle represented as in (eq:model-obstacle) on a model above , the generators of give pure-FS metrics satisfying
Proof. Take . For the more precise assertion, choose the hyperplane divisor ; then . Equation (eq:test-ideal-generation) makes pure-FS. By (eq:test-ideal-bounds), ; the envelope property applied to finishes the proof. ◻
Proof of local regularization
The next lemma places a local curve-positive function inside one global metric on projective space. It uses only algebraic sections and the maximum property on curves.
A projective extension
Lemma (Projective extension). Let be an ordinary open, , and let be finite, continuous and curve-positive. For every , there are , a finite continuous curve-positive metric on , a section nonvanishing near , and a constant , such that
Proof. Set . After shrinking , continuity gives
Choose a compact polynomial norm box with all defining inequalities strict at , including upper bounds on the affine coordinates. Here and . Such boxes form a neighbourhood basis: choose thresholds in inside an ordinary basic neighbourhood and encode them by powers of the polynomials.
For sufficiently large, every logarithmic term in the following maximum is negative on a neighbourhood of :
On the open where every is nonzero, this function satisfies near and .
Put , with the empty product equal to . Clear the denominators in (eq:collar-weight) and homogenize to a common degree , chosen strictly larger than . Write for the homogenization of . Add sufficiently small -multiples of , so that their ratios to have norm less than on . The resulting tuple generates ; let be its FS metric. Then equals on , vanishes near , and satisfies
Indeed, vanishes at infinity because , and the remaining original ratios impose precisely the inequalities defining . The added sections preserve those inequalities on . We interpret on the zero divisor of .
The ordinary opens cover , and . On , define a metric by its -weight ; on , use . The definitions agree on by (eq:normalization). They therefore give a finite continuous metric . Near , one has , so its weight is .
On every smooth algebraic -curve, the weights just used are continuous subharmonic functions or maxima of two such functions. Their maxima are subharmonic by the curve regularization of Proposition “Curve regularization” and the regularized maximum construction. Thus is curve-positive. ◻
Completion of the proof
Proof of Theorem “Local regularization”. Local uniform convergence of smooth positive potentials implies current positivity by testing against . Conversely, fix on a positive-dimensional component of . Proposition “Curve maps and extension” supplies an ordinary ambient open and a finite continuous curve-positive function agreeing with along . Apply Lemma “Projective extension”, and retain its .
By Corollary “Projective space”, the envelope is a uniform FS limit and Theorem “Contact rigidity” gives . By Lemma “Smooth approximation of FS metrics”, choose global smooth positive metrics with . On one fixed ordinary neighbourhood of in where the weight identity holds, put These functions are smooth, have positive curvature, and satisfy . For the decreasing assertion, define Then Thus uniformly on the same . Constant translations preserve curvature. On a zero-dimensional component, every finite continuous function is locally constant and already smooth. ◻
Consequences for continuous potentials
We first apply local regularization to the operation constructed in Proposition “A fixed approachable potential”. The background current remains arbitrary; in particular, it need not itself be a product of curvature currents.
Proof of the mixed-current theorem
Proof of Theorem “Continuous potentials on a positive closed background”. Theorem “Local regularization” places every in . Iterating Proposition “A fixed approachable potential” in (eq:recursive-product) proves positivity, closedness, symmetry, and joint continuity, including nets. Locality, additivity, and positive homogeneity follow from the same recursion. A positive current of top degree is a Radon measure.
It remains to prove independence of the potentials. Let be finite continuous with , and let be any positive closed current for which the bidegrees permit the operation. Both and have positive curvature currents, so Theorem “Local regularization” and Proposition “A fixed approachable potential” give The positive cone is pointed by Lemma “Continuous coefficients”; hence
If , apply this implication to and to the positive closed product of the other slots. Symmetry permits us to place the changed slot first, proving the assertion. ◻
Chern products and closure operations
Corollary (Continuous Chern products). Let be smooth quasi-projective of pure dimension , let be an ordinary open, and let be a positive closed CLD current of bidegree on . Let be continuously metrized analytic line bundles on , with finite local weights and positive CLD curvature currents, where . Their local products glue to a positive closed current It depends only on the curvature currents and , agrees with the smooth wedge product when all weights are smooth, and is a positive Radon measure if . The same assertions hold for rational line bundles after clearing and dividing their tensor denominators.
Proof. Apply Theorem “Continuous potentials on a positive closed background” in local frames. On overlaps, weights differ by logarithms of analytic units, whose curvature is zero by Poincaré–Lelong. Equation (eq:continuous-kernel) identifies the products. The remaining assertions, including rational normalization, follow from the same theorem. ◻
Corollary (Products with a smooth subvariety). Let be a closed immersion of smooth quasi-projective -varieties, with of pure dimension and of pure dimension . Let be ordinary open, put , and let be finite continuous functions on with , where . Write for the integration current on , and write . Then
Proof. Positive smooth approximants from Theorem “Local regularization” restrict to positive smooth approximants on . The assertion is then the projection formula for approachable mixed products [10, Proposition 8.7.5], applied to the closed immersion . ◻
Formula (eq:subvariety-projection) identifies a product with the integration current of with the intrinsic product on . It does not require a pullback operation for arbitrary currents.
Corollary (Closure operations). Let be finite continuous current-positive functions on an ordinary open , where is smooth quasi-projective. If is convex and nondecreasing in each coordinate, then is current-positive. In particular, finite maxima and sums with nonnegative coefficients preserve this class.
If is an ordinary open in a smooth quasi-projective -variety and is an analytic morphism, then is current-positive on .
Proof. By Theorem “Local regularization”, the are locally uniformly approachable by smooth positive potentials. The convex composition assertion is therefore [10, Corollary 8.2.4]. For the pullback assertion, pull back those smooth approximants; smooth pullback preserves positivity, and locally uniform convergence is preserved because continuous maps send compact sets to compact sets. ◻
The projective curve criterion
Corollary (A projective curve criterion). Let be a regular integral projective flat model with smooth generic fibre of positive dimension. Let be an ample line bundle on , and let be a finite continuous metric on . The following conditions are equivalent:
For every algebraic morphism from a smooth -curve, the pulled-back metric has positive Chern current.
The original CLD current is positive.
The metric is semipositive, equivalently a uniform limit of pure Fubini–Study metrics on .
The metric is a uniform limit of global smooth metrics on with positive curvature forms.
The criterion also holds for an ample rational line bundle by clearing its tensor denominator.
Proof. Suppose the first condition holds. Theorem “Envelopes on a regular model” gives a finite continuous semipositive envelope , which is a uniform Fubini–Study limit and satisfies Theorem “Contact rigidity” applies to the curve-positive upper metric and gives . This proves the third condition. Lemma “Smooth approximation of FS metrics” gives the fourth condition from the third, and positivity passes to the current limit, giving the second. Finally, Proposition “Curve maps and extension”, applied in local frames, gives the first condition from the second. Positive tensor powers scale each curvature by the same positive integer, which proves the rational-line assertion. ◻
Comparison with adelic mixed measures
Definition (Boundary completion). Let be quasi-projective. We use the rational boundary completion of [9, Sections 2.4–2.5], retaining its specified line-bundle identifications. A boundary datum consists of a projective compactification, an effective Cartier boundary with its multiplicities, and strictly positive Green data. On common dominating models a Cauchy presentation satisfies, for every and all sufficiently large ,
In a fixed local identification at , this implies where the boundary Green function is finite continuous on that open. The completion uses the full order (eq:boundary-order), not merely this scalar inequality. A strongly nef adelic line bundle has a Cauchy presentation by nef model objects. An integrable one is a difference of two strongly nef objects, allowing rational tensor powers and the specified isometries [9, Definition 2.5.2].
Identification and positivity of the prescribed measure
Proof of Theorem “Positivity of the prescribed adelic mixed measure”. Choose integrable presentations with their prescribed isometries, where are strongly nef. Their metrics at are locally psh-approachable, and their mixed measures are the stable CLD products [9, Lemma 3.6.7 and Sections 3.6.7–3.6.8]. Let be weights in compatible local frames. The specified isometries give for analytic units . By the definition in [9, Section 3.6.8], the prescribed signed measure is
Its independence of presentation is part of that construction.
Theorem “Local regularization” makes each target weight approachable. Apply additivity of approachable products to in every slot; the zero-curvature terms disappear by (eq:continuous-kernel). The alternating expansion is exactly
The right-hand side is positive by Theorem “Continuous potentials on a positive closed background”. Positivity of Radon measures is local, so this proves the assertion on all of . ◻
A quantitative comparison of mixed measures
For completeness, we record a comparison estimate in which the constant is independent of the metrics being compared. It is separate from the proof of contact rigidity: the divisor limit there uses only the continuity of a fixed potential acting on positive closed currents.
Lemma (Global domination of finitely many forms). Let be smooth projective, and let be smooth symmetric real -forms on . There are an ample line bundle , a global smooth metric on , and its positive curvature , such that The inequalities are in the original CLD form cone, and all the constructions take place over .
Proof. Choose a very ample line bundle on . We first construct one global positive curvature that controls the square of a local moment coordinate. On a compact polynomial norm box contained in an affine chart of the embedding defined by , let be an analytic unit on a neighbourhood of . The box is defined by finitely many upper bounds and positive lower bounds on polynomial functions, with bounds in . After clearing powers, its affinoid algebra is the completion of the affine coordinate algebra with the lower-bounded polynomials inverted. Thus can be uniformly approximated on by a rational function from this algebra. Choose the error smaller than . The ultrametric inequality gives In particular is a rational unit there. This equality of moment maps gives the same differential forms on , by [3, Lemma 3.1.10].
Homogenizing a numerator and denominator for expresses it as , where are sections of some positive tensor power , both nonzero on . Set , and choose . In the construction of Proposition “Regularized maximum”, choose strictly positive on , and write Then Hence on .
Take a global generating tuple of , multiply its members by sufficiently small elements of , and append them to . If is any appended section, choose the coefficient so that where the value is at a zero. Thus its logarithmic entry lies more than below the maximum of and throughout . Every appended entry is exactly inactive in the regularized maximum on a neighbourhood of . The full tuple generates everywhere, and regularizing its maximum gives a global smooth positive metric by Lemma “Smooth approximation of FS metrics”. In the frame , its weight on is precisely . Its curvature there is
Now cover by the interiors of finitely many such boxes, using common moment presentations for the finitely many forms on each box. Replace the analytic moment units by rational units as above. The symmetric coefficient matrices of all the are bounded on these compact boxes. The construction for each moment unit supplies a global positive curvature controlling its coordinate square. Suitable positive integer multiples of these curvatures therefore dominate both signs of every coefficient matrix on the corresponding box. Their sum is a global smooth positive curvature, dominates every on the finite cover, and is the curvature of a positive tensor power of . If the list of required coordinate squares is empty, add any smooth positive approximation of a pure-FS metric on . This gives the asserted ample line and metric . ◻
Proposition (Comparison on a fixed smooth test). Let be smooth projective of dimension . For , let be globally smoothly approximable metrics on the same specified line bundle . Fix a real smooth function on . Choose an ample and a global smooth positive curvature such that as in Lemma “Global domination of finitely many forms”. Then
The norm is the uniform norm of the scalar difference of two weights on the same line. The line is fixed once and its calibration have been chosen; the degree constants are independent of all the metrics . The assertion also holds for rational line bundles after clearing and dividing tensor denominators.
Proof. Put , , and . Telescoping and current duality give Each is positive and closed, so . By Lemma “Degree and comparison of measures”, the latter measure has mass . Estimating each summand by its uniform coefficient norm proves (eq:metric-comparison). Multilinearity gives the rational-line version. ◻
Notation
Symbol | Meaning | Reference |
|---|---|---|
| Fixed completion, valuation ring, uniformizer, and | |
| Original CLD differentials and compact smooth test forms | |
| Local smooth positive approximation and its difference class | |
| The operation for approachable | |
| Mixed product with a fixed positive closed background | |
| Curve Dirichlet energy and its energy measure | |
| Normalized smooth complete-intersection curve currents | |
| Lower approachable metric, upper curve-positive metric, and | |
| Semipositive envelope of an obstacle metric | |
| Admissible sections and sums of divisor test ideals | |
| Vertical obstacle ideal and canonical discrepancy boundary | |
| Fixed positive calibration and its ample line | |
| Boundary Green function and full boundary datum | |
| Prescribed signed adelic mixed measure | |
| Convex regularized maximum |
Declaration on the use of generative AI
Generative AI was used in developing and drafting mathematical arguments and in revising the exposition of this manuscript.