Contents of this source
An exact nonlinear flux law and compatible radial source equations
Keep the original -polydisc, , and the single fixed original background of (PO3). This is an explicit family of allowed backgrounds in every remaining degree, not a replacement of the arbitrary background in the general theorems. Write and retain the original radial parameter and diagonal Gauss map .
For a positive Radon measure on with finite tails, use the open-tail convention Thus is right continuous and as distributions on . An atom at is excluded from , but included in its left limit. This convention is important in the clipping formulas below.
Definition (Admissible radial slopes and source fluxes). Let be the cone of finite-valued, nonnegative, nonincreasing right-continuous functions such that Set The value at may be . A source is radially flux-compatible if it has finite tails, the function is nonincreasing, and These are conditions on the ordinary one-dimensional Radon datum. They do not invoke an unknown potential or an unspecified solution of a source equation.
Theorem (Exact radial flux and finite-energy inversion). Every defines an actual extended classical psh potential in the original no-loss zero-boundary first-energy class. Its original top source is Its energy and every mixed first energy have the exact formulas All source identities hold on every original compact smooth scalar test and every actual moment refinement.
The source map from these radial potentials is a bijection onto the flux-compatible Radon data. The inverse is explicit: For such a datum is the unique solution of in the full strong classical-approximation cone , not just among radial candidates. The flux condition is asserted necessary only within the displayed radial class; no classification of all arbitrary nonradial source measures is claimed.
Status: NEW_PROVED for the explicit fixed allowed background. The arbitrary-background bounded calculus, no-loss extension, first-energy mixed calculus, and original radial-shell calibration are frozen INTERNAL_INPUT.
Proof. On every interval the exponential weight is bounded below, so Holder’s inequality makes finite. The function is nonnegative, increasing and concave, with . The scalar function on is convex and nondecreasing. The frozen radial/convex composition calculus therefore gives the actual extended classical psh function in (RF3). One can also construct it by decreasing the bounded classical radial potentials with slopes Each of these extends across the boundary by a finite linear continuation of its radial scalar function. The limits are taken on the original space, with no extension of . Their finite values at every finite positive depth show that the limit is not identically . The boundary value of is zero because as , and its strict negative sublevels are compactly contained smaller polydiscs.
For the moment take a bounded radial slope, clipped to zero after a finite depth. Polarization of the same original radial-shell calibration used in (PO6) gives at all continuity points. Here the tail is taken along the original diagonal Gauss ray; the formula asserts the full original measure identity. Indeed the top measure of has tail away from jump points. The coefficient of has the same binomial factor on both sides of mixed multilinearity, so there is no additional factorial. Right continuity determines the measure and all jump masses uniquely.
Insert the fixed background (PO3). The coefficient Fubini argument of (PO5), applied on each fixed compact original stage, gives For a slope not bounded near zero, first fix . One has Frozen bounded uniform stability therefore gives the clipped original source, including on compact sets containing the origin. Away from clipping depth its tail is the stated one. Local boundedness on every gives the same formula there. Only after this fixed- passage do we let tend to infinity, using (RF11) below to control the entire collapsed tail and the value-truncation loss. A compact subset of stays a positive radial depth away from the outer boundary, so the zero-depth boundary is not silently added to .
Let . It is right continuous, nonincreasing, finite for , and tends to zero at infinity. It therefore defines a unique positive Radon measure with the displayed open tail. Clipping the slope at depth collapses its entire remaining source to that depth: There is no ambiguity when jumps at : the left limit includes the pre-existing atom. For , this collapsed mass is bounded by after choosing any fixed earlier positive depth instead of if necessary. In particular it tends to zero.
If is unbounded, its value truncation at corresponds to the unique depth with ; on any possible plateau one uses the first such depth, which gives the same clipped potential. When is unbounded its slope cannot vanish at a finite depth, so these depths tend to infinity. Formula (RF11) proves absence of truncation loss. If is bounded, the potential is already bounded and there is no pole loss. Thus the frozen no-loss class and original source in (RF5) are established without inferring membership from a formally finite nonpluripolar energy.
Integration by parts now gives For completeness, both endpoint terms vanish. At infinity grows at most linearly and is exponentially bounded. At zero, monotonicity and Holder imply The exponential factor does not affect this limit. Substitution in (RF12) proves the first identity in (RF6), hence actual first-energy membership. The second follows by polarizing that identity in , using the frozen symmetric mixed first energy. All integrals are finite by ordinary Holder.
Conversely, the flux hypotheses make a member of : the integral in (RF4) is exactly (RF2) after substitution. Formula (RF5) constructs with the specified original Radon source. The right-continuous tail recovers , and integration with boundary value zero recovers the radial potential, proving the radial bijection.
Finally suppose any has the same original source measure as . The literal mixed energy extension identifies their curvature functionals on every cone member, hence on . The strong discrepancy is zero and frozen separation gives as relative classes. This proves uniqueness in the full cone without asserting radiality of arbitrary other source data. ◻
Corollary (A linear compatibility condition for finite radial data). Let be a finite positive Radon measure on , of total mass . It is flux-compatible if and only if Equivalently, is nonincreasing; no further finite-energy condition is needed in this finite-mass case. The solution (RF7) has bounded initial slope , belongs to every finite positive power-energy class, and satisfies The same bound holds for its bounded radial truncations.
Status: DIRECT_COROLLARY of the exact source theorem, with an explicit datum criterion.
Proof. Distributional differentiation gives Thus (RF13) is exactly monotonicity of the right-continuous flux. Since , compatibility gives and . This proves the energy integrability and the initial-slope assertion. The bound and layer cake yield The no-loss proof is already part of the theorem. In (RF11) each source tail is moved to the clipping depth and its potential value becomes the corresponding smaller clipped value. Its power energy is therefore no larger than the original integral, proving the last assertion. ◻
Proposition (Exact discrepancy and stability of the inverse). For one has With all norms below taken in , Consequently strong convergence in this radial class is exactly convergence of slopes in this weighted space. For compatible sources it is equivalently In particular, vaguely convergent compatible finite data of uniformly bounded total mass have strongly convergent solutions, provided the vague limit is taken on ; the conclusion includes loss of source mass through the excluded outer boundary.
Status: NEW_PROVED for the exact radial nonlinear inverse; no general data continuity outside this fixed-background family is inferred.
Proof. Apply the original discrepancy identity and then integrate by parts, with the vanishing endpoint terms justified as in (RF12). This gives which is (RF15). For nonnegative scalars and integer , Integrate the first inequality. Holder with exponents and , followed by Minkowski, proves the second; for it is simply an equality. The energy identity in (RF6) makes the topological equivalence immediate. Substitution of (RF7) gives (RF17).
For the final statement let the total masses be bounded by . Compatibility gives the uniform tail bound , so no mass can escape to infinity. Vague convergence therefore implies tail convergence at every continuity point of the limit tail, by first restricting to a compact interval and then using the exponential bound. The limit is finite and compatible: the distributional inequality (RF13) passes locally to the limit, and its tails obey the same bound. Almost-everywhere convergence of , their uniform bound , and dominated convergence in prove strong convergence. Source mass may escape to zero, which is outside ’s ordinary radial domain; the proof does not assert preservation of total mass under this vague convergence. ◻
An explicit nonpolar datum with no full-cone source solution
Theorem (A positive-capacity atom and its exact variational replacement). Fix , write , and let The datum is a literal positive Radon measure supported at a point of positive full outer capacity. It is dominated by the actual bounded source , so . Its exact norm and its unique variational maximizer over the entire completed cone are Nevertheless there is no satisfying on all original tests. Indeed the maximizer has the different exact source Thus positive-capacity support, domination by an actual bounded source, and all finite power-energy bounds on the variational solution do not suffice for the unrestricted source equation.
Status: NEW_PROVED. The unrestricted source-existence claim under only the listed conditions is FALSE, in every . The background remains the single explicit allowed current (PO3).
Proof. Positivity of capacity and the literal atom bound follow from (PO4). Frozen strong tester continuity against the fixed actual source proves strong continuity of ; this is literal evaluation at a non-null point, not the nonliteral null-fiber evaluation considered elsewhere.
For arbitrary put . The completed trace theorem makes nonnegative and concave with . Its chord bound on gives Mixed Holder bounds the left side by . Consequently , with equality at a positive multiple of . The cone/difference dual norm identity proves the first assertion of (RF19). Optimizing gives , and the same norm bound proves this is a global maximizer on the full cone. Frozen strict midpoint energy separation proves uniqueness. No radiality assumption is imposed on the competitors in this argument.
Homogeneity of the original source gives (RF20). Its diffuse positive measure on every compact radial subinterval of makes it different from . This difference is visible on original compact smooth scalar tests: choose a nonnegative smooth compact real function supported in and put, on the coordinate-unit torus, , extended by zero near all coordinate zero loci. Its support is an ordinary compact polyannulus in , , and its integral against (RF20) is strictly positive when is not identically zero. Thus the discrepancy is not merely a failure on auxiliary or delta tests.
If an solved the source equation, then by literal integration on the energy-difference space. The differentiable energy support inequality makes such an a variational maximizer. Uniqueness would force , in contradiction with (RF20) and the preceding original test. This proves full-cone nonexistence. ◻
Corollary (The normal residual is exactly a concavity defect). For the datum and maximizer in (RF18), the normal functional satisfies, for every , It vanishes precisely on those cone members whose actual radial trace is linear on . In particular , but is nonzero as an original-test functional.
Status: NEW_PROVED exact geometric description of one full-cone normal face.
Proof. Use (PO4) and to expand . Since , the result is (RF22). The integrand is nonnegative by concavity and continuous, so its weighted integral vanishes exactly when it vanishes identically. That is precisely the asserted linearity. The original test constructed above gives a nonzero value of the residual, so its negativity on the potential cone is not an equality on the original smooth test sheaf. ◻
What this advances, and what it does not.
The flux condition gives an explicit compatible nonlinear source class, a literal actual solution, full-cone uniqueness, and a quantified strong inverse in every remaining degree. The atom computation identifies a nonzero normal residual as a concrete concavity defect, rather than assuming it vanishes because the datum is positive or capacity controlled. It is a full-dimensional stress test for the general source problem, not a universal classification of arbitrary- sources and not a proof of OPEN-GQ or OPEN-CTO. No auxiliary analytic field, change of absolute value, or restriction to toric test forms is used in any displayed current equality.