OpenMath

Progress · independent proof diagram

Comparison with classical height pairings

Under the correspondence and model comparison theorems, the analytic pairing is a sum of classical abelian height pairings, or the normalized arithmetic intersection of numerically admissible lifts. The resulting formulas are independent of the chosen factorization or lifts.

Conditional comparison formulas · Source edition v0.5.1

Domain of the result

Pairs in Hr(X)×Hn+1−r(X)\mathcal H^r(X)\times\mathcal H^{n+1-r}(X) with the stated abelian Chow factorization or regular numerically admissible arithmetic lifts.

Read the diagrams from top to bottom. Select a numbered connection for its exact hypotheses and deduction, or follow a node to its source. Analytic, model and comparison assumptions retain their stated scope.

How to read the logic

Read from top to bottom. Parallel premises meet at a numbered connection, then lead to a conclusion. Select a connection to read its hypotheses and deduction; select a node to read the linked statement.

AND All inputs are requiredOR Alternative complete routesIFF Equivalent to the whole premise bundleOPEN ⋯→ Unproved bridgeBarred link The implication failsGrey dashed Supporting rule or context
Published inputInternal proof availableConditionalStated hypothesisOpenDraft

The full scope of each occurrence is recorded below its diagram. A proved conditional implication and an open geometric premise keep their separate statuses.

LOGIC 01

Comparison with classical height pairings

Adjunction gives the abelian formula; the native framed calculation gives the arithmetic-model formula; a generically finite alteration contributes its separate degree.

Scope. Over a number field F, use geometrically homologically trivial rational Chow classes, complementary r+s=dim(X)+1, absolute height normalization, and the supplied Green, reciprocity, correspondence and comparison hypotheses. Local auxiliary fields are descended before the global sum. A supplied Chow factorization or numerically admissible model is required in the corresponding branch. Arithmetic model and alteration formulas also require arithmetic Green lifts of ZERO archimedean curvature. The diagrams do not assert existence of such lifts for arbitrary classes.

Premises → connection → conclusion
Comparison with classical height pairingsRead from top to bottom: parallel premises meet at a numbered AND, OR or IFF junction, followed by the conclusion. Dashed OPEN links are unproved bridges; barred links do not assert an implication. Grey links identify supporting rules or context. Each node and connection links to its complete hypotheses and sources below the diagram.Supplied regular numerically admissible lifts give normalized arithmetic intersection. The normalization is 1/[F:ℚ], with exact native finite-place factors and the archimedean convention.CONDITIONALSupplied regularnumerically admissible liftsgive normalized arithmeticintersectionScope & sourcesA Chow abelian factorization gives the normalized Künnemann sum. The normalization is 1/[E:ℚ] and the same fixed height sign is retained.CONDITIONALA Chow abelianfactorization gives thenormalized Künnemann sumScope & sourcesA degree-d alteration over E gives the factor 1/(d[E:ℚ]). The geometric degree and the number-field degree have different origins.CONDITIONALA degree-d alterationover E gives the factor1/(d[E:ℚ])Scope & sourcesThe three scoped comparison theorems. These are compatible comparison conclusions, not three simultaneous assumptions on every X. Each computes the same already constructed height and therefore is independent of its auxiliary choices.AND · Deduction 01Read hypotheses & proofEach stated classical formula computes the canonical analytic height. For z∈ℋʳ(X), w∈ℋⁿ⁺¹⁻ʳ(X), use only the formula whose complete geometric and model hypotheses are supplied.CONDITIONALEach stated classicalformula computes thecanonical analytic heightScope & sources

Scroll inside the frame to follow a large branch. “Fit width” shows the whole layout; “Readable size” restores the text to 100%.

Read the 1 connection

Each numbered card gives the exact inputs, the deduction and its sources.

01AND · The three scoped comparison theorems
Premises and stated hypotheses
  1. ConditionalA Chow abelian factorization gives the normalized Künnemann sum

    The normalization is 1/[E:ℚ] and the same fixed height sign is retained.

    Scope & sources
  2. ConditionalSupplied regular numerically admissible lifts give normalized arithmetic intersection

    The normalization is 1/[F:ℚ], with exact native finite-place factors and the archimedean convention.

    Scope & sources
  3. ConditionalA degree-d alteration over E gives the factor 1/(d[E:ℚ])

    The geometric degree and the number-field degree have different origins.

    Scope & sources
How the deduction works

These are compatible comparison conclusions, not three simultaneous assumptions on every X. Each computes the same already constructed height and therefore is independent of its auxiliary choices.

Conclusion / target
ConditionalEach stated classical formula computes the canonical analytic height

For z∈ℋʳ(X), w∈ℋⁿ⁺¹⁻ʳ(X), use only the formula whose complete geometric and model hypotheses are supplied.

Scope & sources
Evidence and further reading
Back to connection 01 in the diagram ↑
All 4 nodes: scope, status and sources
ConditionalEach stated classical formula computes the canonical analytic height

Conclusion / target

For z∈ℋʳ(X), w∈ℋⁿ⁺¹⁻ʳ(X), use only the formula whose complete geometric and model hypotheses are supplied.

Read the linked statement

Back to this node in the diagram ↑
ConditionalA Chow abelian factorization gives the normalized Künnemann sum

Premise

The normalization is 1/[E:ℚ] and the same fixed height sign is retained.

Read the linked statement

Back to this node in the diagram ↑
ConditionalSupplied regular numerically admissible lifts give normalized arithmetic intersection

Premise

The normalization is 1/[F:ℚ], with exact native finite-place factors and the archimedean convention.

Read the linked statement

Back to this node in the diagram ↑
ConditionalA degree-d alteration over E gives the factor 1/(d[E:ℚ])

Premise

The geometric degree and the number-field degree have different origins.

Read the linked statement

Back to this node in the diagram ↑
Back to diagram ↑

LOGIC 02

Move the cycles before pulling them to a correspondence

Fibre-dimension stratification first bounds one inverse image, then permits the other cycle to avoid its closed image.

Scope. Over a number field F, use geometrically homologically trivial rational Chow classes, complementary r+s=dim(X)+1, absolute height normalization, and the supplied Green, reciprocity, correspondence and comparison hypotheses. Local auxiliary fields are descended before the global sum. A supplied Chow factorization or numerically admissible model is required in the corresponding branch. Arithmetic model and alteration formulas also require arithmetic Green lifts of ZERO archimedean curvature. The diagrams do not assert existence of such lifts for arbitrary classes. T is smooth projective of dimension ℓ, a:T→V, b:T→X and r+q=ℓ+1; work over the original infinite field.

Premises → connection → conclusion
Move the cycles before pulling them to a correspondenceRead from top to bottom: parallel premises meet at a numbered AND, OR or IFF junction, followed by the conclusion. Dashed OPEN links are unproved bridges; barred links do not assert an implication. Grey links identify supporting rules or context. Each node and connection links to its complete hypotheses and sources below the diagram.Finitely many fibre-dimension strata for a and b. Use closures of the strata as the moving constraints.HYPOTHESISFinitely manyfibre-dimension stratafor a and bScope & sourcesMove Z properly against every a-stratum closure over the original field. Use the stated moving lemma, not an alteration of the field.HYPOTHESISMove Z properly againstevery a-stratum closureover the original fieldScope & sourcesFibre-dimension stratification AND a proper-moving representative. For a stratum with fibre dimension k, dim S+k≤ℓ. Proper intersection of Z with its closure gives dim a⁻¹|Z|≤ℓ−r.AND · Deduction 01Read hypotheses & proofMove W properly against B and every b-stratum closure. Since dim B≤q−1 and codim W=q, proper meeting means W∩B is empty; the b-strata also give dim b⁻¹|W|≤ℓ−q.HYPOTHESISMove W properly against Band every b-stratumclosureScope & sourcesdim a⁻¹|Z|≤ℓ−r and dim B≤q−1. B is closed because b is proper; r+q=ℓ+1 gives the last inequality.CONDITIONALdim a⁻¹|Z|≤ℓ−r and dimB≤q−1Scope & sourcesThe first moved cycle AND the second move against its image and fibre strata. The second move makes W disjoint from B=b(a⁻¹|Z|) and meets every required fibre stratum properly.AND · Deduction 02Read hypotheses & proofRationally equivalent Z,W have disjoint inverse supports and the required dimension bounds. The lemma treats a finite family of correspondence resolutions simultaneously, and rational cycles after clearing denominators.CONDITIONALRationally equivalent Z,Whave disjoint inversesupports and the requireddimension boundsScope & sources

Scroll inside the frame to follow a large branch. “Fit width” shows the whole layout; “Readable size” restores the text to 100%.

Read the 2 connections

Each numbered card gives the exact inputs, the deduction and its sources.

01AND · Fibre-dimension stratification AND a proper-moving representative
Premises and stated hypotheses
  1. HypothesisFinitely many fibre-dimension strata for a and b

    Use closures of the strata as the moving constraints.

    Scope & sources
  2. HypothesisMove Z properly against every a-stratum closure over the original field

    Use the stated moving lemma, not an alteration of the field.

    Scope & sources
How the deduction works

For a stratum with fibre dimension k, dim S+k≤ℓ. Proper intersection of Z with its closure gives dim a⁻¹|Z|≤ℓ−r.

Conclusion / target
Conditionaldim a⁻¹|Z|≤ℓ−r and dim B≤q−1

B is closed because b is proper; r+q=ℓ+1 gives the last inequality.

Scope & sources
Evidence and further reading
Back to connection 01 in the diagram ↑
02AND · The first moved cycle AND the second move against its image and fibre strata
Premises and stated hypotheses
  1. Conditionaldim a⁻¹|Z|≤ℓ−r and dim B≤q−1

    B is closed because b is proper; r+q=ℓ+1 gives the last inequality.

    Scope & sources
  2. HypothesisMove W properly against B and every b-stratum closure

    Since dim B≤q−1 and codim W=q, proper meeting means W∩B is empty; the b-strata also give dim b⁻¹|W|≤ℓ−q.

    Scope & sources
How the deduction works

The second move makes W disjoint from B=b(a⁻¹|Z|) and meets every required fibre stratum properly.

Conclusion / target
ConditionalRationally equivalent Z,W have disjoint inverse supports and the required dimension bounds

The lemma treats a finite family of correspondence resolutions simultaneously, and rational cycles after clearing denominators.

Scope & sources
Evidence and further reading
Back to connection 02 in the diagram ↑
All 5 nodes: scope, status and sources
ConditionalRationally equivalent Z,W have disjoint inverse supports and the required dimension bounds

Conclusion / target

The lemma treats a finite family of correspondence resolutions simultaneously, and rational cycles after clearing denominators.

Read the linked statement

Back to this node in the diagram ↑
Conditionaldim a⁻¹|Z|≤ℓ−r and dim B≤q−1

Premise

B is closed because b is proper; r+q=ℓ+1 gives the last inequality.

Read the linked statement

Back to this node in the diagram ↑
HypothesisFinitely many fibre-dimension strata for a and b

Premise

Use closures of the strata as the moving constraints.

Read the linked statement

Back to this node in the diagram ↑
HypothesisMove Z properly against every a-stratum closure over the original field

Premise

Use the stated moving lemma, not an alteration of the field.

Read the linked statement

Back to this node in the diagram ↑
HypothesisMove W properly against B and every b-stratum closure

Premise

Since dim B≤q−1 and codim W=q, proper meeting means W∩B is empty; the b-strata also give dim b⁻¹|W|≤ℓ−q.

Read the linked statement

Back to this node in the diagram ↑
Back to diagram ↑

LOGIC 03

Adjunction for an actual Chow correspondence

Resolve each correspondence component, use refined Gysin cycles in proper position, and apply the height projection formula twice.

Scope. Over a number field F, use geometrically homologically trivial rational Chow classes, complementary r+s=dim(X)+1, absolute height normalization, and the supplied Green, reciprocity, correspondence and comparison hypotheses. Local auxiliary fields are descended before the global sum. A supplied Chow factorization or numerically admissible model is required in the corresponding branch. Arithmetic model and alteration formulas also require arithmetic Green lifts of ZERO archimedean curvature. The diagrams do not assert existence of such lifts for arbitrary classes. Γ∈CHᵐ⁺ᵈ(V×X)ℚ, m=dim V, n=dim X and r+d+q=n+1.

Premises → connection → conclusion
Adjunction for an actual Chow correspondenceRead from top to bottom: parallel premises meet at a numbered AND, OR or IFF junction, followed by the conclusion. Dashed OPEN links are unproved bridges; barred links do not assert an implication. Grey links identify supporting rules or context. Each node and connection links to its complete hypotheses and sources below the diagram.The proper-slice projection formula and symmetry on the admitted domain. Pullback membership and every stated height input are retained.HYPOTHESISThe proper-sliceprojection formula andsymmetry on the admitteddomainScope & sourcesUse the simultaneous moving lemma. The full refined Gysin cycles and their coefficients are used after movement.CONDITIONALUse the simultaneousmoving lemmaScope & sourcesj∗[T]=[Γ] and refined Chow projection formulas. The generic resolution degree is one, and all refined intersection coefficients remain present.HYPOTHESISj∗[T]=[Γ] and refinedChow projection formulasScope & sourcesProperly moved refined cycles AND the two height projection formulas. The b-projection gives the first equality. The a-projection and symmetry give the second. The action is on cycle classes, not an arbitrary pushforward of actual differential forms.AND · Deduction 01Read hypotheses & proofSplit non-geometrically-integral components over a finite E and descend. Keep the flat cycle coefficients. Absolute height invariance cancels the full field factor; sum the components and rational coefficients.HYPOTHESISSplitnon-geometrically-integral components over a finiteE and descendScope & sourcesh_X(b∗a!Z,W)=h_T(a!Z,b!W)=h_V(Z,a∗b!W). T has dimension n−d; its refined cycles A=a!Z and B=b!W have disjoint supports.CONDITIONALh_X(b∗a!Z,W)=h_T(a!Z,b!W)=h_V(Z,a∗b!W)Scope & sourcesThe resolved-component height identity AND descent/summation of actual Chow components. For each geometrically integral component choose a smooth resolution j:T→Γ of generic degree one. The refined algebraic projection formulas identify its pushed cycles with the correspondence actions.AND · Deduction 02Read hypotheses & proofh_X(Γ∗z,w)=h_V(z,ᵗΓ∗w). Every cycle and pullback belongs to the stated admitted domains. Refined Gysin coefficients, residue degrees and complete field degrees are retained.CONDITIONALh_X(Γ∗z,w)=h_V(z,ᵗΓ∗w)Scope & sources

Scroll inside the frame to follow a large branch. “Fit width” shows the whole layout; “Readable size” restores the text to 100%.

Read the 2 connections

Each numbered card gives the exact inputs, the deduction and its sources.

01AND · Properly moved refined cycles AND the two height projection formulas
Premises and stated hypotheses
  1. ConditionalUse the simultaneous moving lemma

    The full refined Gysin cycles and their coefficients are used after movement.

    Scope & sources
  2. HypothesisThe proper-slice projection formula and symmetry on the admitted domain

    Pullback membership and every stated height input are retained.

    Scope & sources
  3. Hypothesisj∗[T]=[Γ] and refined Chow projection formulas

    The generic resolution degree is one, and all refined intersection coefficients remain present.

    Scope & sources
How the deduction works

The b-projection gives the first equality. The a-projection and symmetry give the second. The action is on cycle classes, not an arbitrary pushforward of actual differential forms.

Conclusion / target
Conditionalh_X(b∗a!Z,W)=h_T(a!Z,b!W)=h_V(Z,a∗b!W)

T has dimension n−d; its refined cycles A=a!Z and B=b!W have disjoint supports.

Scope & sources
Evidence and further reading
Back to connection 01 in the diagram ↑
02AND · The resolved-component height identity AND descent/summation of actual Chow components
Premises and stated hypotheses
  1. Conditionalh_X(b∗a!Z,W)=h_T(a!Z,b!W)=h_V(Z,a∗b!W)

    T has dimension n−d; its refined cycles A=a!Z and B=b!W have disjoint supports.

    Scope & sources
  2. HypothesisSplit non-geometrically-integral components over a finite E and descend

    Keep the flat cycle coefficients. Absolute height invariance cancels the full field factor; sum the components and rational coefficients.

    Scope & sources
How the deduction works

For each geometrically integral component choose a smooth resolution j:T→Γ of generic degree one. The refined algebraic projection formulas identify its pushed cycles with the correspondence actions.

Conclusion / target
Conditionalh_X(Γ∗z,w)=h_V(z,ᵗΓ∗w)

Every cycle and pullback belongs to the stated admitted domains. Refined Gysin coefficients, residue degrees and complete field degrees are retained.

Scope & sources
Evidence and further reading
Back to connection 02 in the diagram ↑
All 6 nodes: scope, status and sources
Conditionalh_X(Γ∗z,w)=h_V(z,ᵗΓ∗w)

Conclusion / target

Every cycle and pullback belongs to the stated admitted domains. Refined Gysin coefficients, residue degrees and complete field degrees are retained.

Read the linked statement

Back to this node in the diagram ↑
Conditionalh_X(b∗a!Z,W)=h_T(a!Z,b!W)=h_V(Z,a∗b!W)

Premise

T has dimension n−d; its refined cycles A=a!Z and B=b!W have disjoint supports.

Read the linked statement

Back to this node in the diagram ↑
ConditionalUse the simultaneous moving lemma

Premise

The full refined Gysin cycles and their coefficients are used after movement.

Read the linked statement

Back to this node in the diagram ↑
HypothesisThe proper-slice projection formula and symmetry on the admitted domain

Premise

Pullback membership and every stated height input are retained.

Read the linked statement

Back to this node in the diagram ↑
Hypothesisj∗[T]=[Γ] and refined Chow projection formulas

Premise

The generic resolution degree is one, and all refined intersection coefficients remain present.

Read the linked statement

Back to this node in the diagram ↑
HypothesisSplit non-geometrically-integral components over a finite E and descend

Premise

Keep the flat cycle coefficients. Absolute height invariance cancels the full field factor; sum the components and rational coefficients.

Read the linked statement

Back to this node in the diagram ↑
Back to diagram ↑

LOGIC 04

The normalized abelian height formula

Expand by the actual Chow diagonal, move each return correspondence to the second argument, and use the fixed abelian comparison.

Scope. Over a number field F, use geometrically homologically trivial rational Chow classes, complementary r+s=dim(X)+1, absolute height normalization, and the supplied Green, reciprocity, correspondence and comparison hypotheses. Local auxiliary fields are descended before the global sum. A supplied Chow factorization or numerically admissible model is required in the corresponding branch. Arithmetic model and alteration formulas also require arithmetic Green lifts of ZERO archimedean curvature. The diagrams do not assert existence of such lifts for arbitrary classes. Over finite E/F, Δ_XE=Σⱼvⱼ∘uⱼ in rational Chow, with uⱼ of degree dⱼ through the abelian Aⱼ and vⱼ of degree −dⱼ.

Premises → connection → conclusion
The normalized abelian height formulaRead from top to bottom: parallel premises meet at a numbered AND, OR or IFF junction, followed by the conclusion. Dashed OPEN links are unproved bridges; barred links do not assert an implication. Grey links identify supporting rules or context. Each node and connection links to its complete hypotheses and sources below the diagram.Move vⱼ from the first height factor to ᵗvⱼ on the second. Use the admitted-domain identity with the stated complementary degrees.CONDITIONALMove vⱼ from the firstheight factor to ᵗvⱼ onthe secondScope & sourcesThe actual rational Chow identity recovers z_E. The geometric transfer theorem supplies every required admitted domain on X and each abelian factor; a realization-only decomposition is insufficient.HYPOTHESISThe actual rational Chowidentity recovers z_EScope & sourcesh_AE=[E:ℚ]⁻¹⟨−,−⟩Kun with the same convention. This identifies the already published classical height under the model comparison; no new existence claim is made.HYPOTHESISh_AE=[E:ℚ]⁻¹⟨−,−⟩Kunwith the same conventionScope & sourcesThe Chow-diagonal expansion AND correspondence adjunction AND the normalized abelian comparison. Absolute field invariance gives h_X=h_XE. Expand z_E by the actual diagonal, then apply adjunction term by term and the fixed-sign classical abelian formula.AND · Deduction 01Read hypotheses & proofh_X(z,w)=[E:ℚ]⁻¹Σⱼ⟨uⱼ∗z_E,ᵗvⱼ∗w_E⟩Kun. The Aⱼ degrees are r+dⱼ and dim Aⱼ+1−r−dⱼ. Impossible degrees and homologically trivial rank-degree terms vanish.CONDITIONALh_X(z,w)=[E:ℚ]⁻¹Σⱼ⟨uⱼ∗z_E,ᵗvⱼ∗w_E⟩KunScope & sourcesSEPARATE DEDUCTION OR LIMIT · 1The canonical height descends through rational equivalence and finite field extension. These properties are part of the supplied height theorem.HYPOTHESISThe canonical heightdescends through rationalequivalence and finitefield extensionScope & sourcesEvery allowed choice computes h_X. The same proof applies after a common further finite extension.CONDITIONALEvery allowed choicecomputes h_XScope & sourcesEquality with h_X AND the already established height invariances. This does not assert that arbitrary collections of abstract bilinear forms are uniquely determined by the factorization.AND · Deduction 02Read hypotheses & proofThe value is independent of factorization, splitting field and representatives. Independence follows because each allowed formula computes the canonical left-hand height.CONDITIONALThe value is independentof factorization, splittingfield and representativesScope & sources

Scroll inside the frame to follow a large branch. “Fit width” shows the whole layout; “Readable size” restores the text to 100%.

Read the 2 connections

Each numbered card gives the exact inputs, the deduction and its sources.

01AND · The Chow-diagonal expansion AND correspondence adjunction AND the normalized abelian comparison
Premises and stated hypotheses
  1. HypothesisThe actual rational Chow identity recovers z_E

    The geometric transfer theorem supplies every required admitted domain on X and each abelian factor; a realization-only decomposition is insufficient.

    Scope & sources
  2. ConditionalMove vⱼ from the first height factor to ᵗvⱼ on the second

    Use the admitted-domain identity with the stated complementary degrees.

    Scope & sources
  3. Hypothesish_AE=[E:ℚ]⁻¹⟨−,−⟩Kun with the same convention

    This identifies the already published classical height under the model comparison; no new existence claim is made.

    Scope & sources
How the deduction works

Absolute field invariance gives h_X=h_XE. Expand z_E by the actual diagonal, then apply adjunction term by term and the fixed-sign classical abelian formula.

Conclusion / target
Conditionalh_X(z,w)=[E:ℚ]⁻¹Σⱼ⟨uⱼ∗z_E,ᵗvⱼ∗w_E⟩Kun

The Aⱼ degrees are r+dⱼ and dim Aⱼ+1−r−dⱼ. Impossible degrees and homologically trivial rank-degree terms vanish.

Scope & sources
Evidence and further reading
Back to connection 01 in the diagram ↑
All 7 nodes: scope, status and sources
Conditionalh_X(z,w)=[E:ℚ]⁻¹Σⱼ⟨uⱼ∗z_E,ᵗvⱼ∗w_E⟩Kun

Conclusion / target

The Aⱼ degrees are r+dⱼ and dim Aⱼ+1−r−dⱼ. Impossible degrees and homologically trivial rank-degree terms vanish.

Read the linked statement

Back to this node in the diagram ↑
HypothesisThe actual rational Chow identity recovers z_E

Premise

The geometric transfer theorem supplies every required admitted domain on X and each abelian factor; a realization-only decomposition is insufficient.

Read the linked statement

Back to this node in the diagram ↑
ConditionalMove vⱼ from the first height factor to ᵗvⱼ on the second

Premise

Use the admitted-domain identity with the stated complementary degrees.

Read the linked statement

Back to this node in the diagram ↑
Hypothesish_AE=[E:ℚ]⁻¹⟨−,−⟩Kun with the same convention

Premise

This identifies the already published classical height under the model comparison; no new existence claim is made.

Read the linked statement

Back to this node in the diagram ↑
ConditionalThe value is independent of factorization, splitting field and representatives

Conclusion / target

Independence follows because each allowed formula computes the canonical left-hand height.

Read the linked statement

Back to this node in the diagram ↑
ConditionalEvery allowed choice computes h_X

Premise

The same proof applies after a common further finite extension.

Read the linked statement

Back to this node in the diagram ↑
HypothesisThe canonical height descends through rational equivalence and finite field extension

Premise

These properties are part of the supplied height theorem.

Read the linked statement

Back to this node in the diagram ↑
Back to diagram ↑

LOGIC 05

The native vertical Cartier scalar

The special-fibre multiplicity in the actual model measure cancels the valuation denominator at its divisorial point.

Scope. Over a number field F, use geometrically homologically trivial rational Chow classes, complementary r+s=dim(X)+1, absolute height normalization, and the supplied Green, reciprocity, correspondence and comparison hypotheses. Local auxiliary fields are descended before the global sum. A supplied Chow factorization or numerically admissible model is required in the corresponding branch. Arithmetic model and alteration formulas also require arithmetic Green lifts of ZERO archimedean curvature. The diagrams do not assert existence of such lifts for arbitrary classes. K/ℚₚ has its prescribed absolute value, c_R=−log|ϖ|. The model is integral, normal, flat and projective of relative dimension t. P is a HOMOGENEOUS degree-t polynomial in model first Chern classes; all zero-cycle degrees are native degrees over its residue field k.

Premises → connection → conclusion
The native vertical Cartier scalarRead from top to bottom: parallel premises meet at a numbered AND, OR or IFF junction, followed by the conclusion. Dashed OPEN links are unproved bridges; barred links do not assert an implication. Grey links identify supporting rules or context. Each node and connection links to its complete hypotheses and sources below the diagram.[Pᵃⁿ]=Σᵢbᵢdegₖ(P|Yᵢ)δξᵢ. Use the frozen actual-product comparison and its continuous model-weight recursion on the normal model.HYPOTHESIS[Pᵃⁿ]=Σᵢbᵢdegₖ(P|Yᵢ)δξᵢScope & sourcesg_E(ξᵢ)=c_R aᵢ/bᵢ. The valuation index is bᵢ; it is not replaced by one. Normality and excellence provide the stated divisorial formal model.HYPOTHESISg_E(ξᵢ)=c_R aᵢ/bᵢScope & sourcesThe actual model measure AND the native divisor valuation. At ξᵢ the measure coefficient contains bᵢ, while g_E(ξᵢ)=c_R aᵢ/bᵢ. Multiplication cancels bᵢ exactly, without changing fields.AND · Deduction 01Read hypotheses & proof∫g_E Pᵃⁿ=c_R Σᵢaᵢdegₖ(P|Yᵢ)=c_R degₖ(P|E∩[E]). For special fibre Σbᵢ[Yᵢ] and vertical Cartier divisor E=Σaᵢ[Yᵢ], retain signed coefficients and residue-field degrees.CONDITIONAL∫g_E Pᵃⁿ=c_RΣᵢaᵢdegₖ(P|Yᵢ)=c_Rdegₖ(P|E∩[E])Scope & sources

Scroll inside the frame to follow a large branch. “Fit width” shows the whole layout; “Readable size” restores the text to 100%.

Read the 1 connection

Each numbered card gives the exact inputs, the deduction and its sources.

01AND · The actual model measure AND the native divisor valuation
Premises and stated hypotheses
  1. Hypothesis[Pᵃⁿ]=Σᵢbᵢdegₖ(P|Yᵢ)δξᵢ

    Use the frozen actual-product comparison and its continuous model-weight recursion on the normal model.

    Scope & sources
  2. Hypothesisg_E(ξᵢ)=c_R aᵢ/bᵢ

    The valuation index is bᵢ; it is not replaced by one. Normality and excellence provide the stated divisorial formal model.

    Scope & sources
How the deduction works

At ξᵢ the measure coefficient contains bᵢ, while g_E(ξᵢ)=c_R aᵢ/bᵢ. Multiplication cancels bᵢ exactly, without changing fields.

Conclusion / target
Conditional∫g_E Pᵃⁿ=c_R Σᵢaᵢdegₖ(P|Yᵢ)=c_R degₖ(P|E∩[E])

For special fibre Σbᵢ[Yᵢ] and vertical Cartier divisor E=Σaᵢ[Yᵢ], retain signed coefficients and residue-field degrees.

Scope & sources
Evidence and further reading
Back to connection 01 in the diagram ↑
All 3 nodes: scope, status and sources
Conditional∫g_E Pᵃⁿ=c_R Σᵢaᵢdegₖ(P|Yᵢ)=c_R degₖ(P|E∩[E])

Conclusion / target

For special fibre Σbᵢ[Yᵢ] and vertical Cartier divisor E=Σaᵢ[Yᵢ], retain signed coefficients and residue-field degrees.

Read the linked statement

Back to this node in the diagram ↑
Hypothesis[Pᵃⁿ]=Σᵢbᵢdegₖ(P|Yᵢ)δξᵢ

Premise

Use the frozen actual-product comparison and its continuous model-weight recursion on the normal model.

Read the linked statement

Back to this node in the diagram ↑
Hypothesisg_E(ξᵢ)=c_R aᵢ/bᵢ

Premise

The valuation index is bᵢ; it is not replaced by one. Normality and excellence provide the stated divisorial formal model.

Read the linked statement

Back to this node in the diagram ↑
Back to diagram ↑

LOGIC 06

The supported line-complex character over the trait

A deformation over the DVR computes the exceptional contribution without forgetting the vertical or nonreduced support.

Scope. Over a number field F, use geometrically homologically trivial rational Chow classes, complementary r+s=dim(X)+1, absolute height normalization, and the supplied Green, reciprocity, correspondence and comparison hypotheses. Local auxiliary fields are descended before the global sum. A supplied Chow factorization or numerically admissible model is required in the corresponding branch. Arithmetic model and alteration formulas also require arithmetic Green lifts of ZERO archimedean curvature. The diagrams do not assert existence of such lifts for arbitrary classes. For a nonzero line-bundle map L→M with Cartier zero scheme E, put M in homological degree zero.

Premises → connection → conclusion
The supported line-complex character over the traitRead from top to bottom: parallel premises meet at a numbered AND, OR or IFF junction, followed by the conclusion. Dashed OPEN links are unproved bridges; barred links do not assert an implication. Grey links identify supporting rules or context. Each node and connection links to its complete hypotheses and sources below the diagram.Blow up ℙ¹_V along E×{∞}; the strict transform contributes zero. The local chart A[t,y]/(ty−f), J=(y), is valid even for singular ambient or nonreduced E because f is a non-zero-divisor.HYPOTHESISBlow up ℙ¹_V along E×{∞};the strict transformcontributes zeroScope & sourcesThe exceptional push is (eᵐ−eˡ)/(m−l)∩[E]. This quotient denotes its polynomial series, never inversion of a Chow class. Its degree r−1 part is the displayed sum.INTERNAL PROOF AVAILABLEThe exceptional push is(eᵐ−eˡ)/(m−l)∩[E]Scope & sourcesThe exceptional deformation identity AND the projective-bundle calculation. On P=ℙ_E(N∨⊕O), N=M⊗L⁻¹, the zero-section class h satisfies h²=(m−l)h, π∗h=[E] and π∗1=0. Push eᵐ(1−e⁻ʰ) and take degree r−1.AND · Deduction 01Read hypotheses & proofchᵉ_r([L→M])∩[V]=(1/r!)Σⱼ₌₀ʳ⁻¹ mʳ⁻¹⁻ʲlʲ∩[E]. Here m=c₁(M|E), l=c₁(L|E). The equality lives on E over the excellent DVR itself.CONDITIONALchᵉ_r([L→M])∩[V]=(1/r!)Σⱼ₌₀ʳ⁻¹mʳ⁻¹⁻ʲlʲ∩[E]Scope & sources

Scroll inside the frame to follow a large branch. “Fit width” shows the whole layout; “Readable size” restores the text to 100%.

Read the 1 connection

Each numbered card gives the exact inputs, the deduction and its sources.

01AND · The exceptional deformation identity AND the projective-bundle calculation
Premises and stated hypotheses
  1. HypothesisBlow up ℙ¹_V along E×{∞}; the strict transform contributes zero

    The local chart A[t,y]/(ty−f), J=(y), is valid even for singular ambient or nonreduced E because f is a non-zero-divisor.

    Scope & sources
  2. Internal proof availableThe exceptional push is (eᵐ−eˡ)/(m−l)∩[E]

    This quotient denotes its polynomial series, never inversion of a Chow class. Its degree r−1 part is the displayed sum.

    Scope & sources
How the deduction works

On P=ℙ_E(N∨⊕O), N=M⊗L⁻¹, the zero-section class h satisfies h²=(m−l)h, π∗h=[E] and π∗1=0. Push eᵐ(1−e⁻ʰ) and take degree r−1.

Conclusion / target
Conditionalchᵉ_r([L→M])∩[V]=(1/r!)Σⱼ₌₀ʳ⁻¹ mʳ⁻¹⁻ʲlʲ∩[E]

Here m=c₁(M|E), l=c₁(L|E). The equality lives on E over the excellent DVR itself.

Scope & sources
Evidence and further reading
Back to connection 01 in the diagram ↑
All 3 nodes: scope, status and sources
Conditionalchᵉ_r([L→M])∩[V]=(1/r!)Σⱼ₌₀ʳ⁻¹ mʳ⁻¹⁻ʲlʲ∩[E]

Conclusion / target

Here m=c₁(M|E), l=c₁(L|E). The equality lives on E over the excellent DVR itself.

Read the linked statement

Back to this node in the diagram ↑
HypothesisBlow up ℙ¹_V along E×{∞}; the strict transform contributes zero

Premise

The local chart A[t,y]/(ty−f), J=(y), is valid even for singular ambient or nonreduced E because f is a non-zero-divisor.

Read the linked statement

Back to this node in the diagram ↑
Internal proof availableThe exceptional push is (eᵐ−eˡ)/(m−l)∩[E]

Premise

This quotient denotes its polynomial series, never inversion of a Chow class. Its degree r−1 part is the displayed sum.

Read the linked statement

Back to this node in the diagram ↑
Back to diagram ↑

LOGIC 07

The concrete framed Green scalar

Actual trace adjunction reduces a framed splitting presentation to line complexes; their native Cartier integrals reconstruct the supported character.

Scope. Over a number field F, use geometrically homologically trivial rational Chow classes, complementary r+s=dim(X)+1, absolute height normalization, and the supplied Green, reciprocity, correspondence and comparison hypotheses. Local auxiliary fields are descended before the global sum. A supplied Chow factorization or numerically admissible model is required in the corresponding branch. Arithmetic model and alteration formulas also require arithmetic Green lifts of ZERO archimedean curvature. The diagrams do not assert existence of such lifts for arbitrary classes. Fix the complex C exact OFF its FULL model support and its generic trivialization; its generic support Z has pure codimension r or is empty. The testing W is integral, has dimension r−1 and is contained in X∖Z. The supplied R11 presentation has generic finite flat degree d; all analytic forms and integrations remain native over K.

Premises → connection → conclusion
The concrete framed Green scalarRead from top to bottom: parallel premises meet at a numbered AND, OR or IFF junction, followed by the conclusion. Dashed OPEN links are unproved bridges; barred links do not assert an implication. Grey links identify supporting rules or context. Each node and connection links to its complete hypotheses and sources below the diagram.The actual framed splitting presentation and full finite trace identity. The degree d is the full generic rank of the presentation, and the frame is fixed.HYPOTHESISThe actual framedsplitting presentation andfull finite trace identityScope & sourcesEvery generic testing component carries its Artinian multiplicity. Normalize the closures without changing their weighted pushforward.HYPOTHESISEvery generic testingcomponent carries itsArtinian multiplicityScope & sourcesFinite-flat generic testing cycle AND proper closure with its lengths. The finite-flat rank gives the generic cycle identity; proper closure and pushforward retain those coefficients.AND · Deduction 01Read hypotheses & proofThe weighted normal testing closures push to d[W̄]. The weights are the generic Artinian lengths eλ. Nilpotent and residue-degree data are not discarded.CONDITIONALThe weighted normaltesting closures push tod[W̄]Scope & sourcesReassemble the supported line-complex Chern character. Bivariant pushforward gives d times the original supported character; this d cancels the presentation factor d⁻¹.CONDITIONALReassemble the supportedline-complex CherncharacterScope & sourcesEvaluate each vertical line-complex term natively. The special-fibre multiplicity cancels against its valuation denominator; residue degrees remain.CONDITIONALEvaluate each verticalline-complex term nativelyScope & sourcesFinite actual trace adjunction AND weighted closure pushforward AND Cartier evaluation. The concrete form is d⁻¹Tr of the signed line-complex Green forms with their degree-(r−1) Chern polynomial. Pull to each testing component with all Artinian lengths, integrate there, and push the supported character back.AND · Deduction 02Read hypotheses & proofThe concrete framed Green integral equals c_R times the supported character degree. The theorem concerns the fixed-supported-complex scalar, including vertical generically acyclic terms. Absolute curvature alone does not retain this information.CONDITIONALThe concrete framedGreen integral equals c_Rtimes the supportedcharacter degreeScope & sourcesSEPARATE DEDUCTION OR LIMIT · 1Only the zero absolute K₀ class or curvature is retained. The trivialization and its valuation have been forgotten.HYPOTHESISOnly the zero absolute K₀class or curvature isretainedScope & sourcesCurvature alone loses the framed vertical scalar. For [O —ϖᵃ→ O], the absolute K₀ curvature is zero but the framed scalar is a·c_R. Forgetting the frame destroys the needed datum.BLOCKED · Shortcut 03Read hypotheses & proofA valid scalar comparison for an arbitrary generically trivial complex. This target still requires a specified frame. A zero absolute K₀ class or zero curvature does not supply its scalar.OPENA valid scalar comparisonfor an arbitrarygenerically trivial complexScope & sources

Scroll inside the frame to follow a large branch. “Fit width” shows the whole layout; “Readable size” restores the text to 100%.

Read the 3 connections

Each numbered card gives the exact inputs, the deduction and its sources.

01AND · Finite-flat generic testing cycle AND proper closure with its lengths
Premises and stated hypotheses
  1. HypothesisThe actual framed splitting presentation and full finite trace identity

    The degree d is the full generic rank of the presentation, and the frame is fixed.

    Scope & sources
  2. HypothesisEvery generic testing component carries its Artinian multiplicity

    Normalize the closures without changing their weighted pushforward.

    Scope & sources
How the deduction works

The finite-flat rank gives the generic cycle identity; proper closure and pushforward retain those coefficients.

Conclusion / target
ConditionalThe weighted normal testing closures push to d[W̄]

The weights are the generic Artinian lengths eλ. Nilpotent and residue-degree data are not discarded.

Scope & sources
Evidence and further reading
Back to connection 01 in the diagram ↑
02AND · Finite actual trace adjunction AND weighted closure pushforward AND Cartier evaluation
Premises and stated hypotheses
  1. ConditionalThe weighted normal testing closures push to d[W̄]

    The weights are the generic Artinian lengths eλ. Nilpotent and residue-degree data are not discarded.

    Scope & sources
  2. ConditionalEvaluate each vertical line-complex term natively

    The special-fibre multiplicity cancels against its valuation denominator; residue degrees remain.

    Scope & sources
  3. ConditionalReassemble the supported line-complex Chern character

    Bivariant pushforward gives d times the original supported character; this d cancels the presentation factor d⁻¹.

    Scope & sources
How the deduction works

The concrete form is d⁻¹Tr of the signed line-complex Green forms with their degree-(r−1) Chern polynomial. Pull to each testing component with all Artinian lengths, integrate there, and push the supported character back.

Conclusion / target
ConditionalThe concrete framed Green integral equals c_R times the supported character degree

The theorem concerns the fixed-supported-complex scalar, including vertical generically acyclic terms. Absolute curvature alone does not retain this information.

Scope & sources
Evidence and further reading
Back to connection 02 in the diagram ↑
All 8 nodes: scope, status and sources
ConditionalThe concrete framed Green integral equals c_R times the supported character degree

Conclusion / target

The theorem concerns the fixed-supported-complex scalar, including vertical generically acyclic terms. Absolute curvature alone does not retain this information.

Read the linked statement

Back to this node in the diagram ↑
ConditionalThe weighted normal testing closures push to d[W̄]

Premise

The weights are the generic Artinian lengths eλ. Nilpotent and residue-degree data are not discarded.

Read the linked statement

Back to this node in the diagram ↑
HypothesisThe actual framed splitting presentation and full finite trace identity

Premise

The degree d is the full generic rank of the presentation, and the frame is fixed.

Read the linked statement

Back to this node in the diagram ↑
HypothesisEvery generic testing component carries its Artinian multiplicity

Premise

Normalize the closures without changing their weighted pushforward.

Read the linked statement

Back to this node in the diagram ↑
ConditionalEvaluate each vertical line-complex term natively

Premise

The special-fibre multiplicity cancels against its valuation denominator; residue degrees remain.

Read the linked statement

Back to this node in the diagram ↑
ConditionalReassemble the supported line-complex Chern character

Premise

Bivariant pushforward gives d times the original supported character; this d cancels the presentation factor d⁻¹.

Read the linked statement

Back to this node in the diagram ↑
OpenA valid scalar comparison for an arbitrary generically trivial complex

Target not reached by these inputs

This target still requires a specified frame. A zero absolute K₀ class or zero curvature does not supply its scalar.

Read the linked statement

Back to this node in the diagram ↑
HypothesisOnly the zero absolute K₀ class or curvature is retained

Premise

The trivialization and its valuation have been forgotten.

Read the linked statement

Back to this node in the diagram ↑
Back to diagram ↑

LOGIC 08

From the supported character to the Euler length

Leading localized characters cap to the proper vertical intersection class; the zero-dimensional support identification turns it into the derived Euler length.

Scope. Over a number field F, use geometrically homologically trivial rational Chow classes, complementary r+s=dim(X)+1, absolute height normalization, and the supplied Green, reciprocity, correspondence and comparison hypotheses. Local auxiliary fields are descended before the global sum. A supplied Chow factorization or numerically admissible model is required in the corresponding branch. Arithmetic model and alteration formulas also require arithmetic Green lifts of ZERO archimedean curvature. The diagrams do not assert existence of such lifts for arbitrary classes. The regular model has total dimension N; r+s=N and the generic Z,W are disjoint. Their vertical intersection may have positive-dimensional support.

Premises → connection → conclusion
From the supported character to the Euler lengthRead from top to bottom: parallel premises meet at a numbered AND, OR or IFF junction, followed by the conclusion. Dashed OPEN links are unproved bridges; barred links do not assert an implication. Grey links identify supporting rules or context. Each node and connection links to its complete hypotheses and sources below the diagram.The leading localized characters are [Z̄] and [W̄]; the cap product is pure zero-dimensional. Retain the support and use the stated cap/Adams argument, including vanishing of lower-dimensional contributions.HYPOTHESISThe leading localizedcharacters are [Z̄] and[W̄]; the cap product ispure zero-dimensionalScope & sourcesThe supported G₀–Chow identification matches every closed point. Proper Euler push sends Oₓ to [κ(x):k]. Summing the derived cohomology lengths with signs gives the same degree.HYPOTHESISThe supported G₀–Chowidentification matchesevery closed pointScope & sourcesPurity of the localized cap product AND the support Euler pushforward. The lower localized components vanish after capping in the indicated dimensions. The degree-N product is the leading cycle product; its proper support push is the alternating residue length.AND · Deduction 01Read hypotheses & proofThe localized intersection degree is the Euler length of O_Z̄⊗ᴸO_W̄. No proper-intersection assumption on the special fibre is inserted. The final Chow class is pure of dimension zero on the actual support.CONDITIONALThe localized intersectiondegree is the Euler lengthof O_Z̄⊗ᴸO_W̄Scope & sources

Scroll inside the frame to follow a large branch. “Fit width” shows the whole layout; “Readable size” restores the text to 100%.

Read the 1 connection

Each numbered card gives the exact inputs, the deduction and its sources.

01AND · Purity of the localized cap product AND the support Euler pushforward
Premises and stated hypotheses
  1. HypothesisThe leading localized characters are [Z̄] and [W̄]; the cap product is pure zero-dimensional

    Retain the support and use the stated cap/Adams argument, including vanishing of lower-dimensional contributions.

    Scope & sources
  2. HypothesisThe supported G₀–Chow identification matches every closed point

    Proper Euler push sends Oₓ to [κ(x):k]. Summing the derived cohomology lengths with signs gives the same degree.

    Scope & sources
How the deduction works

The lower localized components vanish after capping in the indicated dimensions. The degree-N product is the leading cycle product; its proper support push is the alternating residue length.

Conclusion / target
ConditionalThe localized intersection degree is the Euler length of O_Z̄⊗ᴸO_W̄

No proper-intersection assumption on the special fibre is inserted. The final Chow class is pure of dimension zero on the actual support.

Scope & sources
Evidence and further reading
Back to connection 01 in the diagram ↑
All 3 nodes: scope, status and sources
ConditionalThe localized intersection degree is the Euler length of O_Z̄⊗ᴸO_W̄

Conclusion / target

No proper-intersection assumption on the special fibre is inserted. The final Chow class is pure of dimension zero on the actual support.

Read the linked statement

Back to this node in the diagram ↑
HypothesisThe leading localized characters are [Z̄] and [W̄]; the cap product is pure zero-dimensional

Premise

Retain the support and use the stated cap/Adams argument, including vanishing of lower-dimensional contributions.

Read the linked statement

Back to this node in the diagram ↑
HypothesisThe supported G₀–Chow identification matches every closed point

Premise

Proper Euler push sends Oₓ to [κ(x):k]. Summing the derived cohomology lengths with signs gives the same degree.

Read the linked statement

Back to this node in the diagram ↑
Back to diagram ↑

LOGIC 09

Numerically admissible local lifts

The concrete Green forms have zero curvature by the numerical detector; their framed scalar is the model intersection, and the second admissible lift removes its vertical difference.

Scope. Over a number field F, use geometrically homologically trivial rational Chow classes, complementary r+s=dim(X)+1, absolute height normalization, and the supplied Green, reciprocity, correspondence and comparison hypotheses. Local auxiliary fields are descended before the global sum. A supplied Chow factorization or numerically admissible model is required in the corresponding branch. Arithmetic model and alteration formulas also require arithmetic Green lifts of ZERO archimedean curvature. The diagrams do not assert existence of such lifts for arbitrary classes. A regular projective model and numerically admissible pure lifts Θ_Z,Θ_W are supplied; the generic cycles are disjoint and r+s equals the total model dimension.

Premises → connection → conclusion
Numerically admissible local liftsRead from top to bottom: parallel premises meet at a numbered AND, OR or IFF junction, followed by the conclusion. Dashed OPEN links are unproved bridges; barred links do not assert an implication. Grey links identify supporting rules or context. Each node and connection links to its complete hypotheses and sources below the diagram.The native framed Green scalar. Use the fixed generic trivialization.CONDITIONALThe native framed GreenscalarScope & sourcesThe supported-character / derived-Euler identity. No proper special-fibre intersection is required.CONDITIONALThe supported-character/ derived-Euler identityScope & sourcesFramed scalar comparison AND the pure Euler-length identity. Use the exact supported complexes and retain all local multiplicities, including vertical generically acyclic terms.AND · Deduction 01Read hypotheses & proofThe supplied pure numerically admissible resolutions have zero ACTUAL curvature. The finite model detector applies in the exact operational degree and yields Green forms on the original cycle support complement.HYPOTHESISThe supplied purenumerically admissibleresolutions have zeroACTUAL curvatureScope & sourcesΘ_W−[W̄] is vertical and Θ_Z tests every vertical complementary cycle as zero. This is the full numerical admissibility condition, not only vanishing against selected components.HYPOTHESISΘ_W−[W̄] is verticaland Θ_Z tests everyvertical complementarycycle as zeroScope & sourcesThe two-sided Green-choice independence theorem applies. It permits replacement of the concrete forms by the chosen admitted Green forms.HYPOTHESISThe two-sidedGreen-choiceindependence theoremappliesScope & sourcesThe concrete scalar is c_R I(Θ_Z,[W̄]). The supported character computation and Euler comparison are both needed for this equality.CONDITIONALThe concrete scalar isc_R I(Θ_Z,[W̄])Scope & sourcesConcrete numerical Green forms AND framed/Euler evaluation AND the second numerical correction. First evaluate against the closure W̄. Since Θ_W−[W̄] is vertical, numerical admissibility of Θ_Z kills its contribution and replaces W̄ by Θ_W.AND · Deduction 02Read hypotheses & proofThe local analytic term is c_R I(Θ_Z,Θ_W). The exact-support Green forms include the generically acyclic vertical complexes. The value is independent of the admitted Green choice by the two-sided construction.CONDITIONALThe local analytic term isc_R I(Θ_Z,Θ_W)Scope & sources

Scroll inside the frame to follow a large branch. “Fit width” shows the whole layout; “Readable size” restores the text to 100%.

Read the 2 connections

Each numbered card gives the exact inputs, the deduction and its sources.

01AND · Framed scalar comparison AND the pure Euler-length identity
Premises and stated hypotheses
  1. ConditionalThe native framed Green scalar

    Use the fixed generic trivialization.

    Scope & sources
  2. ConditionalThe supported-character / derived-Euler identity

    No proper special-fibre intersection is required.

    Scope & sources
How the deduction works

Use the exact supported complexes and retain all local multiplicities, including vertical generically acyclic terms.

Conclusion / target
ConditionalThe concrete scalar is c_R I(Θ_Z,[W̄])

The supported character computation and Euler comparison are both needed for this equality.

Scope & sources
Evidence and further reading
Back to connection 01 in the diagram ↑
02AND · Concrete numerical Green forms AND framed/Euler evaluation AND the second numerical correction
Premises and stated hypotheses
  1. HypothesisThe supplied pure numerically admissible resolutions have zero ACTUAL curvature

    The finite model detector applies in the exact operational degree and yields Green forms on the original cycle support complement.

    Scope & sources
  2. ConditionalThe concrete scalar is c_R I(Θ_Z,[W̄])

    The supported character computation and Euler comparison are both needed for this equality.

    Scope & sources
  3. HypothesisΘ_W−[W̄] is vertical and Θ_Z tests every vertical complementary cycle as zero

    This is the full numerical admissibility condition, not only vanishing against selected components.

    Scope & sources
  4. HypothesisThe two-sided Green-choice independence theorem applies

    It permits replacement of the concrete forms by the chosen admitted Green forms.

    Scope & sources
How the deduction works

First evaluate against the closure W̄. Since Θ_W−[W̄] is vertical, numerical admissibility of Θ_Z kills its contribution and replaces W̄ by Θ_W.

Conclusion / target
ConditionalThe local analytic term is c_R I(Θ_Z,Θ_W)

The exact-support Green forms include the generically acyclic vertical complexes. The value is independent of the admitted Green choice by the two-sided construction.

Scope & sources
Evidence and further reading
Back to connection 02 in the diagram ↑
All 7 nodes: scope, status and sources
ConditionalThe local analytic term is c_R I(Θ_Z,Θ_W)

Conclusion / target

The exact-support Green forms include the generically acyclic vertical complexes. The value is independent of the admitted Green choice by the two-sided construction.

Read the linked statement

Back to this node in the diagram ↑
HypothesisThe supplied pure numerically admissible resolutions have zero ACTUAL curvature

Premise

The finite model detector applies in the exact operational degree and yields Green forms on the original cycle support complement.

Read the linked statement

Back to this node in the diagram ↑
ConditionalThe concrete scalar is c_R I(Θ_Z,[W̄])

Premise

The supported character computation and Euler comparison are both needed for this equality.

Read the linked statement

Back to this node in the diagram ↑
ConditionalThe native framed Green scalar

Premise

Use the fixed generic trivialization.

Read the linked statement

Back to this node in the diagram ↑
ConditionalThe supported-character / derived-Euler identity

Premise

No proper special-fibre intersection is required.

Read the linked statement

Back to this node in the diagram ↑
HypothesisΘ_W−[W̄] is vertical and Θ_Z tests every vertical complementary cycle as zero

Premise

This is the full numerical admissibility condition, not only vanishing against selected components.

Read the linked statement

Back to this node in the diagram ↑
HypothesisThe two-sided Green-choice independence theorem applies

Premise

It permits replacement of the concrete forms by the chosen admitted Green forms.

Read the linked statement

Back to this node in the diagram ↑
Back to diagram ↑

LOGIC 10

The normalized global arithmetic-model formula

Native local weights turn the finite scalar into the arithmetic finite-place degree; the specified Green convention supplies the matching archimedean half-factor.

Scope. Over a number field F, use geometrically homologically trivial rational Chow classes, complementary r+s=dim(X)+1, absolute height normalization, and the supplied Green, reciprocity, correspondence and comparison hypotheses. Local auxiliary fields are descended before the global sum. A supplied Chow factorization or numerically admissible model is required in the corresponding branch. Arithmetic model and alteration formulas also require arithmetic Green lifts of ZERO archimedean curvature. The diagrams do not assert existence of such lifts for arbitrary classes. A regular projective arithmetic model over O_F and numerically admissible lifts of both classes are supplied, with arithmetic Green lifts of ZERO archimedean curvature.

Premises → connection → conclusion
The normalized global arithmetic-model formulaRead from top to bottom: parallel premises meet at a numbered AND, OR or IFF junction, followed by the conclusion. Dashed OPEN links are unproved bridges; barred links do not assert an implication. Grey links identify supporting rules or context. Each node and connection links to its complete hypotheses and sources below the diagram.The local equality c_v I(Θ_Z,Θ_W). Apply at every finite place to the supplied admissible model data.CONDITIONALThe local equality c_vI(Θ_Z,Θ_W)Scope & sourcesc_v=(log p)/e_v and [F_v:ℚₚ]/[F:ℚ]. The full degree, including ramification and residue degree, is retained.HYPOTHESISc_v=(log p)/e_v and[F_v:ℚₚ]/[F:ℚ]Scope & sourcesThe native local comparison AND the complete local/global weights. Multiplication cancels e_v and leaves f_v log p=log#k(v); residue lengths remain inside the intersection term.AND · Deduction 01Read hypotheses & proofAt infinity the normalized analytic Green term matches the arithmetic half-sum. Both arithmetic Green lifts have ZERO archimedean curvature, so the star product reduces to its evaluation term. The Gillet–Soulé convention is −log|f|² and the analytic one is half of it; real places have weight one and complex places weight two.HYPOTHESISAt infinity the normalizedanalytic Green termmatches the arithmetichalf-sumScope & sourcesGeneric movement, extended principal divisors and height Chow invariance. Rational equivalences change the lifts by their complete principal arithmetic divisors, including vertical terms; no proper special-fibre intersection is assumed.HYPOTHESISGeneric movement,extended principaldivisors and height ChowinvarianceScope & sourcesAt v∣p the weighted local scalar is log#k(v)/[F:ℚ] times the Euler length. Here c_v=(log p)/e_v and the height weight is [F_v:ℚₚ]/[F:ℚ]=e_v f_v/[F:ℚ].CONDITIONALAt v∣p the weighted localscalar is log#k(v)/[F:ℚ]times the Euler lengthScope & sourcesThe finite-place equality AND the archimedean equality AND Chow invariance. Sum these equalities with the absolute weights used in the already constructed height. The finite sum and the archimedean contribution match the arithmetic degree term by term.AND · Deduction 02Read hypotheses & proofh_X(z,w)=[F:ℚ]⁻¹ deĝ(Θ̂_Z·Θ̂_W). Move the generic cycles to be disjoint and extend the rational functions used in movement, retaining their vertical divisor terms.CONDITIONALh_X(z,w)=[F:ℚ]⁻¹deĝ(Θ̂_Z·Θ̂_W)Scope & sources

Scroll inside the frame to follow a large branch. “Fit width” shows the whole layout; “Readable size” restores the text to 100%.

Read the 2 connections

Each numbered card gives the exact inputs, the deduction and its sources.

01AND · The native local comparison AND the complete local/global weights
Premises and stated hypotheses
  1. ConditionalThe local equality c_v I(Θ_Z,Θ_W)

    Apply at every finite place to the supplied admissible model data.

    Scope & sources
  2. Hypothesisc_v=(log p)/e_v and [F_v:ℚₚ]/[F:ℚ]

    The full degree, including ramification and residue degree, is retained.

    Scope & sources
How the deduction works

Multiplication cancels e_v and leaves f_v log p=log#k(v); residue lengths remain inside the intersection term.

Conclusion / target
ConditionalAt v∣p the weighted local scalar is log#k(v)/[F:ℚ] times the Euler length

Here c_v=(log p)/e_v and the height weight is [F_v:ℚₚ]/[F:ℚ]=e_v f_v/[F:ℚ].

Scope & sources
Evidence and further reading
Back to connection 01 in the diagram ↑
02AND · The finite-place equality AND the archimedean equality AND Chow invariance
Premises and stated hypotheses
  1. ConditionalAt v∣p the weighted local scalar is log#k(v)/[F:ℚ] times the Euler length

    Here c_v=(log p)/e_v and the height weight is [F_v:ℚₚ]/[F:ℚ]=e_v f_v/[F:ℚ].

    Scope & sources
  2. HypothesisAt infinity the normalized analytic Green term matches the arithmetic half-sum

    Both arithmetic Green lifts have ZERO archimedean curvature, so the star product reduces to its evaluation term. The Gillet–Soulé convention is −log|f|² and the analytic one is half of it; real places have weight one and complex places weight two.

    Scope & sources
  3. HypothesisGeneric movement, extended principal divisors and height Chow invariance

    Rational equivalences change the lifts by their complete principal arithmetic divisors, including vertical terms; no proper special-fibre intersection is assumed.

    Scope & sources
How the deduction works

Sum these equalities with the absolute weights used in the already constructed height. The finite sum and the archimedean contribution match the arithmetic degree term by term.

Conclusion / target
Conditionalh_X(z,w)=[F:ℚ]⁻¹ deĝ(Θ̂_Z·Θ̂_W)

Move the generic cycles to be disjoint and extend the rational functions used in movement, retaining their vertical divisor terms.

Scope & sources
Evidence and further reading
Back to connection 02 in the diagram ↑
All 6 nodes: scope, status and sources
Conditionalh_X(z,w)=[F:ℚ]⁻¹ deĝ(Θ̂_Z·Θ̂_W)

Conclusion / target

Move the generic cycles to be disjoint and extend the rational functions used in movement, retaining their vertical divisor terms.

Read the linked statement

Back to this node in the diagram ↑
ConditionalAt v∣p the weighted local scalar is log#k(v)/[F:ℚ] times the Euler length

Premise

Here c_v=(log p)/e_v and the height weight is [F_v:ℚₚ]/[F:ℚ]=e_v f_v/[F:ℚ].

Read the linked statement

Back to this node in the diagram ↑
ConditionalThe local equality c_v I(Θ_Z,Θ_W)

Premise

Apply at every finite place to the supplied admissible model data.

Read the linked statement

Back to this node in the diagram ↑
Hypothesisc_v=(log p)/e_v and [F_v:ℚₚ]/[F:ℚ]

Premise

The full degree, including ramification and residue degree, is retained.

Read the linked statement

Back to this node in the diagram ↑
HypothesisAt infinity the normalized analytic Green term matches the arithmetic half-sum

Premise

Both arithmetic Green lifts have ZERO archimedean curvature, so the star product reduces to its evaluation term. The Gillet–Soulé convention is −log|f|² and the analytic one is half of it; real places have weight one and complex places weight two.

Read the linked statement

Back to this node in the diagram ↑
HypothesisGeneric movement, extended principal divisors and height Chow invariance

Premise

Rational equivalences change the lifts by their complete principal arithmetic divisors, including vertical terms; no proper special-fibre intersection is assumed.

Read the linked statement

Back to this node in the diagram ↑
Back to diagram ↑

LOGIC 11

The alteration comparison and its two degrees

The supplied upstairs model first gives downstairs membership; projection formula then gives the geometric factor, while the model normalization gives the number-field factor.

Scope. Over a number field F, use geometrically homologically trivial rational Chow classes, complementary r+s=dim(X)+1, absolute height normalization, and the supplied Green, reciprocity, correspondence and comparison hypotheses. Local auxiliary fields are descended before the global sum. A supplied Chow factorization or numerically admissible model is required in the corresponding branch. Arithmetic model and alteration formulas also require arithmetic Green lifts of ZERO archimedean curvature. The diagrams do not assert existence of such lifts for arbitrary classes. f:Y→X_E is a smooth-projective generically finite alteration of degree d over a finite E/F; both pulled-back classes have supplied regular numerically admissible arithmetic lifts on Y.

Premises → connection → conclusion
The alteration comparison and its two degreesRead from top to bottom: parallel premises meet at a numbered AND, OR or IFF junction, followed by the conclusion. Dashed OPEN links are unproved bridges; barred links do not assert an implication. Grey links identify supporting rules or context. Each node and connection links to its complete hypotheses and sources below the diagram.The stated native dominant and finite-degree obstruction detectors. Use the original support and complete field degree.HYPOTHESISThe stated nativedominant andfinite-degree obstructiondetectorsScope & sourcesThe upstairs regular numerically admissible lifts are actually supplied. No general existence theorem for arbitrary classes is inferred.HYPOTHESISThe upstairs regularnumerically admissible liftsare actually suppliedScope & sourcesThe correspondence adjunction theorem. Use the graph of f.CONDITIONALThe correspondenceadjunction theoremScope & sourcesf∗f*=d on the relevant rational Chow classes. d is the generic degree of f, not [E:ℚ].HYPOTHESISf∗f*=d on the relevantrational Chow classesScope & sourcesNumerical vanishing upstairs AND dominant detection AND finite-constant descent. The local numerical criterion kills the pulled-back obstruction; dominant injectivity and then finite-field injectivity descend it.AND · Deduction 01Read hypotheses & proofAdjunction AND the generic-degree Chow push–pull identity. Apply the graph correspondence and then divide by the nonzero rational integer d.AND · Deduction 02Read hypotheses & proofThe original z,w belong to their native local kernels. The argument applies to both complementary classes.CONDITIONALThe original z,w belong totheir native local kernelsScope & sourcesh_Y(f*z_E,f*w_E)=d h_XE(z_E,w_E). This is adjunction together with f∗f*=d; it is applied after both domains have been established.CONDITIONALh_Y(f*z_E,f*w_E)=dh_XE(z_E,w_E)Scope & sourcesThe upstairs model formula contributes 1/[E:ℚ]. Absolute extension invariance then identifies h_XE with h_X.CONDITIONALThe upstairs model formulacontributes 1/[E:ℚ]Scope & sourcesDownstairs admitted membership AND generic-degree adjunction AND the upstairs model formula. The complete finite field factor is handled by absolute field invariance, separately from f∗f*=d on Chow.AND · Deduction 03Read hypotheses & proofh_X(z,w)=deĝ(Θ̂_f*z·Θ̂_f*w)/(d[E:ℚ]). A model morphism extending f is not required. Nor is f assumed finite outside the chosen cycle.CONDITIONALh_X(z,w)=deĝ(Θ̂_f*z·Θ̂_f*w)/(d[E:ℚ])Scope & sources

Scroll inside the frame to follow a large branch. “Fit width” shows the whole layout; “Readable size” restores the text to 100%.

Read the 3 connections

Each numbered card gives the exact inputs, the deduction and its sources.

01AND · Numerical vanishing upstairs AND dominant detection AND finite-constant descent
Premises and stated hypotheses
  1. HypothesisThe upstairs regular numerically admissible lifts are actually supplied

    No general existence theorem for arbitrary classes is inferred.

    Scope & sources
  2. HypothesisThe stated native dominant and finite-degree obstruction detectors

    Use the original support and complete field degree.

    Scope & sources
How the deduction works

The local numerical criterion kills the pulled-back obstruction; dominant injectivity and then finite-field injectivity descend it.

Conclusion / target
ConditionalThe original z,w belong to their native local kernels

The argument applies to both complementary classes.

Scope & sources
Evidence and further reading
Back to connection 01 in the diagram ↑
02AND · Adjunction AND the generic-degree Chow push–pull identity
Premises and stated hypotheses
  1. Hypothesisf∗f*=d on the relevant rational Chow classes

    d is the generic degree of f, not [E:ℚ].

    Scope & sources
How the deduction works

Apply the graph correspondence and then divide by the nonzero rational integer d.

Conclusion / target
Conditionalh_Y(f*z_E,f*w_E)=d h_XE(z_E,w_E)

This is adjunction together with f∗f*=d; it is applied after both domains have been established.

Scope & sources
Evidence and further reading
Back to connection 02 in the diagram ↑
03AND · Downstairs admitted membership AND generic-degree adjunction AND the upstairs model formula
Premises and stated hypotheses
  1. ConditionalThe original z,w belong to their native local kernels

    The argument applies to both complementary classes.

    Scope & sources
  2. Conditionalh_Y(f*z_E,f*w_E)=d h_XE(z_E,w_E)

    This is adjunction together with f∗f*=d; it is applied after both domains have been established.

    Scope & sources
  3. ConditionalThe upstairs model formula contributes 1/[E:ℚ]

    Absolute extension invariance then identifies h_XE with h_X.

    Scope & sources
How the deduction works

The complete finite field factor is handled by absolute field invariance, separately from f∗f*=d on Chow.

Conclusion / target
Conditionalh_X(z,w)=deĝ(Θ̂_f*z·Θ̂_f*w)/(d[E:ℚ])

A model morphism extending f is not required. Nor is f assumed finite outside the chosen cycle.

Scope & sources
Evidence and further reading
Back to connection 03 in the diagram ↑
All 8 nodes: scope, status and sources
Conditionalh_X(z,w)=deĝ(Θ̂_f*z·Θ̂_f*w)/(d[E:ℚ])

Conclusion / target

A model morphism extending f is not required. Nor is f assumed finite outside the chosen cycle.

Read the linked statement

Back to this node in the diagram ↑
ConditionalThe original z,w belong to their native local kernels

Premise

The argument applies to both complementary classes.

Read the linked statement

Back to this node in the diagram ↑
HypothesisThe upstairs regular numerically admissible lifts are actually supplied

Premise

No general existence theorem for arbitrary classes is inferred.

Read the linked statement

Back to this node in the diagram ↑
HypothesisThe stated native dominant and finite-degree obstruction detectors

Premise

Use the original support and complete field degree.

Read the linked statement

Back to this node in the diagram ↑
Conditionalh_Y(f*z_E,f*w_E)=d h_XE(z_E,w_E)

Premise

This is adjunction together with f∗f*=d; it is applied after both domains have been established.

Read the linked statement

Back to this node in the diagram ↑
ConditionalThe correspondence adjunction theorem
Hypothesisf∗f*=d on the relevant rational Chow classes

Premise

d is the generic degree of f, not [E:ℚ].

Read the linked statement

Back to this node in the diagram ↑
ConditionalThe upstairs model formula contributes 1/[E:ℚ]

Premise

Absolute extension invariance then identifies h_XE with h_X.

Read the linked statement

Back to this node in the diagram ↑
Back to diagram ↑

LOGIC 12

Blowups, Shioda–Katsura joins and cyclic covers

The actual codimension-two blowup identity supplies a negative exceptional summand; a finite-flat cover supplies its full generic rank.

Scope. Over a number field F, use geometrically homologically trivial rational Chow classes, complementary r+s=dim(X)+1, absolute height normalization, and the supplied Green, reciprocity, correspondence and comparison hypotheses. Local auxiliary fields are descended before the global sum. A supplied Chow factorization or numerically admissible model is required in the corresponding branch. Arithmetic model and alteration formulas also require arithmetic Green lifts of ZERO archimedean curvature. The diagrams do not assert existence of such lifts for arbitrary classes.

Premises → connection → conclusion
Blowups, Shioda–Katsura joins and cyclic coversRead from top to bottom: parallel premises meet at a numbered AND, OR or IFF junction, followed by the conclusion. Dashed OPEN links are unproved bridges; barred links do not assert an implication. Grey links identify supporting rules or context. Each node and connection links to its complete hypotheses and sources below the diagram.The codimension-two blowup formula has the negative center term. The normal bundle of the exceptional divisor fixes the minus sign. The center classes have degrees r−1,s−1, whose sum is dim C+1.HYPOTHESISThe codimension-twoblowup formula has thenegative center termScope & sourcesTransfer each summand by correspondence adjunction. Zero or out-of-range homological terms are omitted; split components after finite extension with absolute normalization.CONDITIONALTransfer each summand bycorrespondenceadjunctionScope & sourcesg∗g*=d on the generic Chow groups. This d is the generic degree of the actual resolved join map.HYPOTHESISg∗g*=d on the genericChow groupsScope & sourcesThe degree-d pullback identity AND the signed blowup diagonal AND adjunction. First d h_H=h_W(g*z,g*w). Expand the blowup diagonal into the ambient summand and the negative exceptional summand, then apply adjunction to each.AND · Deduction 01Read hypotheses & proofFor the resolved join, h_H=(h_V−h_C)/d on the specified transforms. Let W=Bl_C(V) and g:W→H have degree d. Set a_z=q∗g*z and b_z=p∗i*g*z, with the same operations for w.CONDITIONALFor the resolved join,h_H=(h_V−h_C)/d on thespecified transformsScope & sourcesSEPARATE DEDUCTION OR LIMIT · 1Correspondence adjunction identifies the pulled-back height. Both classes are in their admitted domains.CONDITIONALCorrespondenceadjunction identifies thepulled-back heightScope & sourcesf∗f*=M for the actual finite-flat covering map. Use its full rank with all cycle multiplicities.HYPOTHESISf∗f*=M for the actualfinite-flat covering mapScope & sourcesThe normalized abelian formula on Y. Its normalization contributes the separate number-field factor.CONDITIONALThe normalized abelianformula on YScope & sourcesFinite-flat push–pull AND adjunction AND the covering formula. The generic finite-flat rank M and the field degree [E:ℚ] are independent. Absorbing 1/M into a return correspondence yields the same formula.AND · Deduction 02Read hypotheses & proofA finite-flat rank-M cover gives h_X=h_Y/M. With an abelian factorization of the covering variety over E, this is (M[E:ℚ])⁻¹ times its Künnemann sum.CONDITIONALA finite-flat rank-Mcover gives h_X=h_Y/MScope & sources

Scroll inside the frame to follow a large branch. “Fit width” shows the whole layout; “Readable size” restores the text to 100%.

Read the 2 connections

Each numbered card gives the exact inputs, the deduction and its sources.

01AND · The degree-d pullback identity AND the signed blowup diagonal AND adjunction
Premises and stated hypotheses
  1. Hypothesisg∗g*=d on the generic Chow groups

    This d is the generic degree of the actual resolved join map.

    Scope & sources
  2. HypothesisThe codimension-two blowup formula has the negative center term

    The normal bundle of the exceptional divisor fixes the minus sign. The center classes have degrees r−1,s−1, whose sum is dim C+1.

    Scope & sources
  3. ConditionalTransfer each summand by correspondence adjunction

    Zero or out-of-range homological terms are omitted; split components after finite extension with absolute normalization.

    Scope & sources
How the deduction works

First d h_H=h_W(g*z,g*w). Expand the blowup diagonal into the ambient summand and the negative exceptional summand, then apply adjunction to each.

Conclusion / target
ConditionalFor the resolved join, h_H=(h_V−h_C)/d on the specified transforms

Let W=Bl_C(V) and g:W→H have degree d. Set a_z=q∗g*z and b_z=p∗i*g*z, with the same operations for w.

Scope & sources
Evidence and further reading
Back to connection 01 in the diagram ↑
All 8 nodes: scope, status and sources
ConditionalFor the resolved join, h_H=(h_V−h_C)/d on the specified transforms

Conclusion / target

Let W=Bl_C(V) and g:W→H have degree d. Set a_z=q∗g*z and b_z=p∗i*g*z, with the same operations for w.

Read the linked statement

Back to this node in the diagram ↑
Hypothesisg∗g*=d on the generic Chow groups

Premise

This d is the generic degree of the actual resolved join map.

Read the linked statement

Back to this node in the diagram ↑
HypothesisThe codimension-two blowup formula has the negative center term

Premise

The normal bundle of the exceptional divisor fixes the minus sign. The center classes have degrees r−1,s−1, whose sum is dim C+1.

Read the linked statement

Back to this node in the diagram ↑
ConditionalTransfer each summand by correspondence adjunction

Premise

Zero or out-of-range homological terms are omitted; split components after finite extension with absolute normalization.

Read the linked statement

Back to this node in the diagram ↑
ConditionalA finite-flat rank-M cover gives h_X=h_Y/M

Conclusion / target

With an abelian factorization of the covering variety over E, this is (M[E:ℚ])⁻¹ times its Künnemann sum.

Read the linked statement

Back to this node in the diagram ↑
Hypothesisf∗f*=M for the actual finite-flat covering map

Premise

Use its full rank with all cycle multiplicities.

Read the linked statement

Back to this node in the diagram ↑
ConditionalCorrespondence adjunction identifies the pulled-back height

Premise

Both classes are in their admitted domains.

Read the linked statement

Back to this node in the diagram ↑
ConditionalThe normalized abelian formula on Y

Premise

Its normalization contributes the separate number-field factor.

Read the linked statement

Back to this node in the diagram ↑
Back to diagram ↑

LOGIC 13

Determinant metrics and Deligne pairings

The normalized complex determinant comparisons and the smooth-model non-Archimedean comparison are proved in their precise settings; general bad-reduction compatibility remains a separate target.

Scope. Over a number field F, use geometrically homologically trivial rational Chow classes, complementary r+s=dim(X)+1, absolute height normalization, and the supplied Green, reciprocity, correspondence and comparison hypotheses. Local auxiliary fields are descended before the global sum. A supplied Chow factorization or numerically admissible model is required in the corresponding branch. Arithmetic model and alteration formulas also require arithmetic Green lifts of ZERO archimedean curvature. The diagrams do not assert existence of such lifts for arbitrary classes.

Premises → connection → conclusion
Determinant metrics and Deligne pairingsRead from top to bottom: parallel premises meet at a numbered AND, OR or IFF junction, followed by the conclusion. Dashed OPEN links are unproved bridges; barred links do not assert an implication. Grey links identify supporting rules or context. Each node and connection links to its complete hypotheses and sources below the diagram.The normalized Quillen projection-formula isometry. Product Kähler metrics and unit origin rigidifications are part of the statement.INTERNAL PROOF AVAILABLEThe normalized Quillenprojection-formulaisometryScope & sourcesA curve correspondence gives the normalized flat Poincaré line. Use filtered rational K₀ lifts and complementary cycle degrees.INTERNAL PROOF AVAILABLEA curve correspondencegives the normalized flatPoincaré lineScope & sourcesThe source-curve good-reduction model has the canonical metric. The complete DVR, smooth curve model and generic rank/degree conditions are required.INTERNAL PROOF AVAILABLEThe source-curvegood-reduction model hasthe canonical metricScope & sourcesVirtual rank zero gives the flat Deligne pairing. Use the curve determinant convention and the normalized metric.INTERNAL PROOF AVAILABLEVirtual rank zero givesthe flat Deligne pairingScope & sourcesThe complex projection, rank-zero, cycle and good-reduction results. Each result concerns its stated normalized rigidified line; the common unit rigidification removes the otherwise constant metric ambiguity.AND · Deduction 01Read hypotheses & proofThe stated normalized determinant and Poincaré metric identities hold. The precise hypotheses of each of the four linked results are retained. These do not already provide every bad-reduction height metric.INTERNAL PROOF AVAILABLEThe stated normalizeddeterminant and Poincarémetric identities holdScope & sourcesSEPARATE DEDUCTION OR LIMIT · 1A canonical admissible vertical correction at bad reduction. The abelian-scheme single-component argument used at good reduction is no longer available in this form.OPENA canonical admissiblevertical correction at badreductionScope & sourcesA native comparison identity with trace, local lengths and the fixed sign. A line isomorphism or a generic-fibre identity alone does not fix the local metric scalar.OPENA native comparisonidentity with trace, locallengths and the fixed signScope & sourcesConstruct and compare the missing admissible bad-reduction metric. The vertical correction depends on a semistable or Néron model. It must be compared with the actual height on the original valued field, including trace, local lengths, continuity and normalization.OPEN · Open step 02Read hypotheses & proofA general bad-reduction determinant metric agrees with the required admissible height metric. This is an open comparison target. The smooth-model identities do not complete it.OPENA general bad-reductiondeterminant metric agreeswith the requiredadmissible height metricScope & sources

Scroll inside the frame to follow a large branch. “Fit width” shows the whole layout; “Readable size” restores the text to 100%.

Read the 2 connections

Each numbered card gives the exact inputs, the deduction and its sources.

01AND · The complex projection, rank-zero, cycle and good-reduction results
Premises and stated hypotheses
  1. Internal proof availableThe normalized Quillen projection-formula isometry

    Product Kähler metrics and unit origin rigidifications are part of the statement.

    Scope & sources
  2. Internal proof availableVirtual rank zero gives the flat Deligne pairing

    Use the curve determinant convention and the normalized metric.

    Scope & sources
  3. Internal proof availableA curve correspondence gives the normalized flat Poincaré line

    Use filtered rational K₀ lifts and complementary cycle degrees.

    Scope & sources
  4. Internal proof availableThe source-curve good-reduction model has the canonical metric

    The complete DVR, smooth curve model and generic rank/degree conditions are required.

    Scope & sources
How the deduction works

Each result concerns its stated normalized rigidified line; the common unit rigidification removes the otherwise constant metric ambiguity.

Conclusion / target
Internal proof availableThe stated normalized determinant and Poincaré metric identities hold

The precise hypotheses of each of the four linked results are retained. These do not already provide every bad-reduction height metric.

Scope & sources
Evidence and further reading
Back to connection 01 in the diagram ↑
All 8 nodes: scope, status and sources
Internal proof availableThe stated normalized determinant and Poincaré metric identities hold

Conclusion / target

The precise hypotheses of each of the four linked results are retained. These do not already provide every bad-reduction height metric.

Read the linked statement

Back to this node in the diagram ↑
Internal proof availableThe normalized Quillen projection-formula isometry

Premise

Product Kähler metrics and unit origin rigidifications are part of the statement.

Read the linked statement

Back to this node in the diagram ↑
Internal proof availableVirtual rank zero gives the flat Deligne pairing

Premise

Use the curve determinant convention and the normalized metric.

Read the linked statement

Back to this node in the diagram ↑
Internal proof availableA curve correspondence gives the normalized flat Poincaré line

Premise

Use filtered rational K₀ lifts and complementary cycle degrees.

Read the linked statement

Back to this node in the diagram ↑
Internal proof availableThe source-curve good-reduction model has the canonical metric

Premise

The complete DVR, smooth curve model and generic rank/degree conditions are required.

Read the linked statement

Back to this node in the diagram ↑
OpenA general bad-reduction determinant metric agrees with the required admissible height metric

Conclusion / target

This is an open comparison target. The smooth-model identities do not complete it.

Read the linked statement

Back to this node in the diagram ↑
OpenA canonical admissible vertical correction at bad reduction

Premise

The abelian-scheme single-component argument used at good reduction is no longer available in this form.

Read the linked statement

Back to this node in the diagram ↑
OpenA native comparison identity with trace, local lengths and the fixed sign

Premise

A line isomorphism or a generic-fibre identity alone does not fix the local metric scalar.

Read the linked statement

Back to this node in the diagram ↑
Back to diagram ↑

LOGIC 14

The normalized Quillen projection isometry

Derived projection identifies the rigidified lines; equal curvature on the whole compact Jacobian and the unit origin make the metric ratio identically one.

Scope. C is a pointed smooth projective connected complex curve, X is a smooth projective connected complex variety, J=Pic⁰(C), and P is axis-rigidified with its standard unit metric and purely mixed Chern form Ω. Use a hermitian perfect F on C×X, K=Rq∗F, the cochain determinant convention and product Kähler metrics.

Premises → connection → conclusion
The normalized Quillen projection isometryRead from top to bottom: parallel premises meet at a numbered AND, OR or IFF junction, followed by the conclusion. Dashed OPEN links are unproved bridges; barred links do not assert an implication. Grey links identify supporting rules or context. Each node and connection links to its complete hypotheses and sources below the diagram.BGS curvature with the stated determinant and product conventions. Derived base change identifies the constant fibre Euler characteristic with rk K.HYPOTHESISBGS curvature with thestated determinant andproduct conventionsScope & sourcesΩ has real degree one on C and one on J. The pure theta-curvature terms cancel in the Poincaré construction.HYPOTHESISΩ has real degree one on Cand one on JScope & sourcesPurely mixed Poincaré curvature AND the determinant curvature formula. The ambient integral is ∫C×X Td(T_C)Td(T_X)ch(F)(e^Ω−1); the curve calculation gives the same answer.AND · Deduction 01Read hypotheses & proofDerived projection and base change identify numerator complexes and their fibres at zero. The constant denominator uses the SAME Quillen norm as the numerator at zero.INTERNAL PROOF AVAILABLEDerived projection andbase change identifynumerator complexes andtheir fibres at zeroScope & sourcesOnly Ω²/2 contributes base degree two in the BGS formula. Ω already contributes degree two on C, so positive C-degree factors cannot contribute. Integration over X leaves its Euler characteristic rk K.INTERNAL PROOF AVAILABLEOnly Ω²/2 contributesbase degree two in theBGS formulaScope & sourcesThe normalized Quillen metrics are smooth on ALL J and unit at zero. This includes cohomology-jump loci. The same argument works after changing the allowed representative or fixed product metrics.HYPOTHESISThe normalized Quillenmetrics are smooth on ALLJ and unit at zeroScope & sourcesThe rigidified algebraic isomorphism AND identical curvature AND global smoothness with unit normalization. The logarithm of the metric ratio is smooth pluriharmonic on compact connected J, hence constant. Unit norm at zero forces that constant to vanish.AND · Deduction 02Read hypotheses & proofD_C×X(F)≅D_C(Rq∗F) is an exact rigidified isometry. Both Chern forms are (rk K)/2 ·∫CΩ². Under the canonical rigidified identifications the normalized metric is independent of the chosen hermitian representatives and fixed product metrics.INTERNAL PROOF AVAILABLED_C×X(F)≅D_C(Rq∗F) isan exact rigidifiedisometryScope & sources

Scroll inside the frame to follow a large branch. “Fit width” shows the whole layout; “Readable size” restores the text to 100%.

Read the 2 connections

Each numbered card gives the exact inputs, the deduction and its sources.

01AND · Purely mixed Poincaré curvature AND the determinant curvature formula
Premises and stated hypotheses
  1. HypothesisΩ has real degree one on C and one on J

    The pure theta-curvature terms cancel in the Poincaré construction.

    Scope & sources
  2. HypothesisBGS curvature with the stated determinant and product conventions

    Derived base change identifies the constant fibre Euler characteristic with rk K.

    Scope & sources
How the deduction works

The ambient integral is ∫C×X Td(T_C)Td(T_X)ch(F)(e^Ω−1); the curve calculation gives the same answer.

Conclusion / target
Internal proof availableOnly Ω²/2 contributes base degree two in the BGS formula

Ω already contributes degree two on C, so positive C-degree factors cannot contribute. Integration over X leaves its Euler characteristic rk K.

Scope & sources
Evidence and further reading
Back to connection 01 in the diagram ↑
02AND · The rigidified algebraic isomorphism AND identical curvature AND global smoothness with unit normalization
Premises and stated hypotheses
  1. Internal proof availableDerived projection and base change identify numerator complexes and their fibres at zero

    The constant denominator uses the SAME Quillen norm as the numerator at zero.

    Scope & sources
  2. Internal proof availableOnly Ω²/2 contributes base degree two in the BGS formula

    Ω already contributes degree two on C, so positive C-degree factors cannot contribute. Integration over X leaves its Euler characteristic rk K.

    Scope & sources
  3. HypothesisThe normalized Quillen metrics are smooth on ALL J and unit at zero

    This includes cohomology-jump loci. The same argument works after changing the allowed representative or fixed product metrics.

    Scope & sources
How the deduction works

The logarithm of the metric ratio is smooth pluriharmonic on compact connected J, hence constant. Unit norm at zero forces that constant to vanish.

Conclusion / target
Internal proof availableD_C×X(F)≅D_C(Rq∗F) is an exact rigidified isometry

Both Chern forms are (rk K)/2 ·∫CΩ². Under the canonical rigidified identifications the normalized metric is independent of the chosen hermitian representatives and fixed product metrics.

Scope & sources
Evidence and further reading
Back to connection 02 in the diagram ↑
All 6 nodes: scope, status and sources
Internal proof availableD_C×X(F)≅D_C(Rq∗F) is an exact rigidified isometry

Conclusion / target

Both Chern forms are (rk K)/2 ·∫CΩ². Under the canonical rigidified identifications the normalized metric is independent of the chosen hermitian representatives and fixed product metrics.

Read the linked statement

Back to this node in the diagram ↑
Internal proof availableDerived projection and base change identify numerator complexes and their fibres at zero

Premise

The constant denominator uses the SAME Quillen norm as the numerator at zero.

Read the linked statement

Back to this node in the diagram ↑
Internal proof availableOnly Ω²/2 contributes base degree two in the BGS formula

Premise

Ω already contributes degree two on C, so positive C-degree factors cannot contribute. Integration over X leaves its Euler characteristic rk K.

Read the linked statement

Back to this node in the diagram ↑
HypothesisΩ has real degree one on C and one on J

Premise

The pure theta-curvature terms cancel in the Poincaré construction.

Read the linked statement

Back to this node in the diagram ↑
HypothesisBGS curvature with the stated determinant and product conventions

Premise

Derived base change identifies the constant fibre Euler characteristic with rk K.

Read the linked statement

Back to this node in the diagram ↑
HypothesisThe normalized Quillen metrics are smooth on ALL J and unit at zero

Premise

This includes cohomology-jump loci. The same argument works after changing the allowed representative or fixed product metrics.

Read the linked statement

Back to this node in the diagram ↑
Back to diagram ↑

LOGIC 15

Virtual rank zero and the flat Deligne metric

Rank and determinant reduce the perfect complex to a line minus the unit line, whose normalized determinant is precisely the Deligne pairing.

Scope. Use the same pointed complex curve and normalized Poincaré line. K is a perfect complex of VIRTUAL RANK ZERO on C and L=det K.

Premises → connection → conclusion
Virtual rank zero and the flat Deligne metricRead from top to bottom: parallel premises meet at a numbered AND, OR or IFF junction, followed by the conclusion. Dashed OPEN links are unproved bridges; barred links do not assert an implication. Grey links identify supporting rules or context. Each node and connection links to its complete hypotheses and sources below the diagram.The normalized determinant is λ(PL)λ(P)⁻¹λ(L)⁻¹λ(O). Normalize the algebraic isomorphism at zero; invertible holomorphic functions on connected projective J are constant.INTERNAL PROOF AVAILABLEThe normalizeddeterminant isλ(PL)λ(P)⁻¹λ(L)⁻¹λ(O)Scope & sourcesThe Deligne curvature ∫CΩc₁(L) vanishes by C-degree three. Both metrics are smooth and unit at zero, so their pluriharmonic log ratio is zero.INTERNAL PROOF AVAILABLEThe Deligne curvature∫CΩc₁(L) vanishes byC-degree threeScope & sourcesThe Quillen curvature is zero because rk K=0. Use the established curvature formula.INTERNAL PROOF AVAILABLEThe Quillen curvature iszero because rk K=0Scope & sourcesThe rank-zero K₀ identity AND the determinant expression AND zero curvatures with unit origin. On the nonsingular curve K₀(C)=ℤ⊕Pic(C), so [K]=[L]−[O]. The resulting four determinant factors are the Deligne pairing; compactness and the rigidification identify the metrics.AND · Deduction 01Read hypotheses & proofD_C(K)≅⟨P,p_C*L⟩ is the unique rigidified flat isometry. Any smooth hermitian metric on L may be used. The metric on the resulting rigidified line is the same normalized flat metric.INTERNAL PROOF AVAILABLED_C(K)≅⟨P,p_C*L⟩ is theunique rigidified flatisometryScope & sources

Scroll inside the frame to follow a large branch. “Fit width” shows the whole layout; “Readable size” restores the text to 100%.

Read the 1 connection

Each numbered card gives the exact inputs, the deduction and its sources.

01AND · The rank-zero K₀ identity AND the determinant expression AND zero curvatures with unit origin
Premises and stated hypotheses
  1. Internal proof availableThe normalized determinant is λ(PL)λ(P)⁻¹λ(L)⁻¹λ(O)

    Normalize the algebraic isomorphism at zero; invertible holomorphic functions on connected projective J are constant.

    Scope & sources
  2. Internal proof availableThe Quillen curvature is zero because rk K=0

    Use the established curvature formula.

    Scope & sources
  3. Internal proof availableThe Deligne curvature ∫CΩc₁(L) vanishes by C-degree three

    Both metrics are smooth and unit at zero, so their pluriharmonic log ratio is zero.

    Scope & sources
How the deduction works

On the nonsingular curve K₀(C)=ℤ⊕Pic(C), so [K]=[L]−[O]. The resulting four determinant factors are the Deligne pairing; compactness and the rigidification identify the metrics.

Conclusion / target
Internal proof availableD_C(K)≅⟨P,p_C*L⟩ is the unique rigidified flat isometry

Any smooth hermitian metric on L may be used. The metric on the resulting rigidified line is the same normalized flat metric.

Scope & sources
Evidence and further reading
Back to connection 01 in the diagram ↑
All 4 nodes: scope, status and sources
Internal proof availableD_C(K)≅⟨P,p_C*L⟩ is the unique rigidified flat isometry

Conclusion / target

Any smooth hermitian metric on L may be used. The metric on the resulting rigidified line is the same normalized flat metric.

Read the linked statement

Back to this node in the diagram ↑
Internal proof availableThe normalized determinant is λ(PL)λ(P)⁻¹λ(L)⁻¹λ(O)

Premise

Normalize the algebraic isomorphism at zero; invertible holomorphic functions on connected projective J are constant.

Read the linked statement

Back to this node in the diagram ↑
Internal proof availableThe Quillen curvature is zero because rk K=0

Premise

Use the established curvature formula.

Read the linked statement

Back to this node in the diagram ↑
Internal proof availableThe Deligne curvature ∫CΩc₁(L) vanishes by C-degree three

Premise

Both metrics are smooth and unit at zero, so their pluriharmonic log ratio is zero.

Read the linked statement

Back to this node in the diagram ↑
Back to diagram ↑

LOGIC 16

Curve correspondences and filtered K₀ lifts

Filtered GRR identifies the determinant with the transpose correspondence divisor, and the two normalized isometries give its flat Poincaré metric.

Scope. dim X=n, Γ∈CHʳ(C×X)ℚ and W∈Vⁿ⁺¹⁻ʳ(X). Choose rational K₀ lifts with Chern characters starting in the indicated degrees; use F=E_Γ⊗ᴸp_X*E_W.

Premises → connection → conclusion
Curve correspondences and filtered K₀ liftsRead from top to bottom: parallel premises meet at a numbered AND, OR or IFF junction, followed by the conclusion. Dashed OPEN links are unproved bridges; barred links do not assert an implication. Grey links identify supporting rules or context. Each node and connection links to its complete hypotheses and sources below the diagram.Identify the curve rank-zero determinant with its Deligne line. The degree-zero divisor gives the normalized flat Poincaré metric.INTERNAL PROOF AVAILABLEIdentify the curverank-zero determinantwith its Deligne lineScope & sourcesChanging higher-filtration lifts changes the product only in codimension ≥n+2. That codimension is zero on C×X, so the rational Chern character gives the same normalized line.INTERNAL PROOF AVAILABLEChanging higher-filtrationlifts changes the productonly in codimension ≥n+2Scope & sourcesrk Rq∗F=0 and c₁(det Rq∗F)=ᵗΓ∗W. The product Chern character starts in codimension n+1, so positive Todd terms cannot affect rank or c₁.INTERNAL PROOF AVAILABLErk Rq∗F=0 and c₁(detRq∗F)=ᵗΓ∗WScope & sourcesProject the normalized determinant to C. Use the exact projection-formula isometry.INTERNAL PROOF AVAILABLEProject the normalizeddeterminant to CScope & sourcesFiltered GRR AND the two normalized isometries AND rational-lift independence. For rational classes take a common tensor power, apply the integral identities and then take the positive real root of the metric norm.AND · Deduction 01Read hypotheses & proofThe normalized determinant is the flat Poincaré line of ᵗΓ∗W. The divisor ᵗΓ∗W has degree zero because W is homologically trivial.INTERNAL PROOF AVAILABLEThe normalizeddeterminant is the flatPoincaré line of ᵗΓ∗WScope & sourcesSEPARATE DEDUCTION OR LIMIT · 1The cited determinant–cycle–Hodge and relative comparison theorems. Use the precise disjoint-cycle trivialization and conventions named in the paper.HYPOTHESISThe citeddeterminant–cycle–Hodgeand relative comparisontheoremsScope & sourcesThe normalized Poincaré line metric is smooth across incidence. The meromorphic frame, not the metric in a nonvanishing local frame, accounts for its zero/pole term.INTERNAL PROOF AVAILABLEThe normalized Poincaréline metric is smoothacross incidenceScope & sourcesThe determinant–cycle–Hodge comparison AND the fixed sign conventions. The cited relative comparison has an inversion under its conventions. Fixing the cochain determinant and matching Poincaré sign removes the ambiguity; for s=fe, −log∥s∥=−log|f|−log∥e∥.AND · Deduction 02Read hypotheses & proofThe corresponding disjoint-cycle trivialization gives the stated archimedean height convention. A zero or pole of a meromorphic incidence frame is distinct from a singularity of the smooth line metric.CONDITIONALThe correspondingdisjoint-cycletrivialization gives thestated archimedean heightconventionScope & sources

Scroll inside the frame to follow a large branch. “Fit width” shows the whole layout; “Readable size” restores the text to 100%.

Read the 2 connections

Each numbered card gives the exact inputs, the deduction and its sources.

01AND · Filtered GRR AND the two normalized isometries AND rational-lift independence
Premises and stated hypotheses
  1. Internal proof availablerk Rq∗F=0 and c₁(det Rq∗F)=ᵗΓ∗W

    The product Chern character starts in codimension n+1, so positive Todd terms cannot affect rank or c₁.

    Scope & sources
  2. Internal proof availableProject the normalized determinant to C

    Use the exact projection-formula isometry.

    Scope & sources
  3. Internal proof availableIdentify the curve rank-zero determinant with its Deligne line

    The degree-zero divisor gives the normalized flat Poincaré metric.

    Scope & sources
  4. Internal proof availableChanging higher-filtration lifts changes the product only in codimension ≥n+2

    That codimension is zero on C×X, so the rational Chern character gives the same normalized line.

    Scope & sources
How the deduction works

For rational classes take a common tensor power, apply the integral identities and then take the positive real root of the metric norm.

Conclusion / target
Internal proof availableThe normalized determinant is the flat Poincaré line of ᵗΓ∗W

The divisor ᵗΓ∗W has degree zero because W is homologically trivial.

Scope & sources
Evidence and further reading
Back to connection 01 in the diagram ↑
All 8 nodes: scope, status and sources
Internal proof availableThe normalized determinant is the flat Poincaré line of ᵗΓ∗W

Conclusion / target

The divisor ᵗΓ∗W has degree zero because W is homologically trivial.

Read the linked statement

Back to this node in the diagram ↑
Internal proof availablerk Rq∗F=0 and c₁(det Rq∗F)=ᵗΓ∗W

Premise

The product Chern character starts in codimension n+1, so positive Todd terms cannot affect rank or c₁.

Read the linked statement

Back to this node in the diagram ↑
Internal proof availableProject the normalized determinant to C

Premise

Use the exact projection-formula isometry.

Read the linked statement

Back to this node in the diagram ↑
Internal proof availableIdentify the curve rank-zero determinant with its Deligne line

Premise

The degree-zero divisor gives the normalized flat Poincaré metric.

Read the linked statement

Back to this node in the diagram ↑
Internal proof availableChanging higher-filtration lifts changes the product only in codimension ≥n+2

Premise

That codimension is zero on C×X, so the rational Chern character gives the same normalized line.

Read the linked statement

Back to this node in the diagram ↑
ConditionalThe corresponding disjoint-cycle trivialization gives the stated archimedean height convention

Conclusion / target

A zero or pole of a meromorphic incidence frame is distinct from a singularity of the smooth line metric.

Read the linked statement

Back to this node in the diagram ↑
HypothesisThe cited determinant–cycle–Hodge and relative comparison theorems

Premise

Use the precise disjoint-cycle trivialization and conventions named in the paper.

Read the linked statement

Back to this node in the diagram ↑
Internal proof availableThe normalized Poincaré line metric is smooth across incidence

Premise

The meromorphic frame, not the metric in a nonvanishing local frame, accounts for its zero/pole term.

Read the linked statement

Back to this node in the diagram ↑
Back to diagram ↑

LOGIC 17

The good-reduction source-curve model metric

The generic rigidified identity differs by a vertical divisor; a geometrically integral special fibre and the unit zero section force that divisor to vanish.

Scope. Over a complete DVR with its FIXED absolute value, C is a smooth proper geometrically connected curve with a section and J its abelian-scheme Jacobian. K is model-perfect with generic virtual rank zero and deg det K_generic=0.

Premises → connection → conclusion
The good-reduction source-curve model metricRead from top to bottom: parallel premises meet at a numbered AND, OR or IFF junction, followed by the conclusion. Dashed OPEN links are unproved bridges; barred links do not assert an implication. Grey links identify supporting rules or context. Each node and connection links to its complete hypotheses and sources below the diagram.Regular J with geometrically integral special fibre. This is why an arbitrary vertical divisor has just this one coefficient.HYPOTHESISRegular J withgeometrically integralspecial fibreScope & sourcesBoth model lines have integral unit origin rigidifications. Retain the native absolute value and the actual model lines.HYPOTHESISBoth model lines haveintegral unit originrigidificationsScope & sourcesA single integral special-fibre component AND unit integral origin rigidifications. Pulling a[J_s] to the zero section gives valuation a. Both origin frames are units, so that valuation is zero.AND · Deduction 01Read hypotheses & proofdet K has degree zero on every fibre and defines a relative Pic⁰ point. Rigidify along the section; the generic rank-zero determinant identity respects the unit at the origin.INTERNAL PROOF AVAILABLEdet K has degree zero onevery fibre and defines arelative Pic⁰ pointScope & sourcesThe quotient divisor is a[J_s] and its coefficient a is zero. The abelian scheme is regular and its special fibre is geometrically integral.INTERNAL PROOF AVAILABLEThe quotient divisor isa[J_s] and its coefficienta is zeroScope & sourcesThe Poincaré multiplication laws extend over the abelian scheme. The induced model maps are isometries.HYPOTHESISThe Poincarémultiplication laws extendover the abelian schemeScope & sourcesThe generic rank-zero rigidified identity AND extension with no vertical divisor AND Poincaré laws. Normality extends the identity and its inverse over the whole model. The extended Poincaré multiplication laws are isometries, identifying the model metric with the canonical one.AND · Deduction 02Read hypotheses & proofThe normalized determinant model metric is the canonical rigidified Poincaré metric. An ambient model reduces to this case only when its derived pushforward to the source curve is perfect.INTERNAL PROOF AVAILABLEThe normalizeddeterminant model metricis the canonical rigidifiedPoincaré metricScope & sources

Scroll inside the frame to follow a large branch. “Fit width” shows the whole layout; “Readable size” restores the text to 100%.

Read the 2 connections

Each numbered card gives the exact inputs, the deduction and its sources.

01AND · A single integral special-fibre component AND unit integral origin rigidifications
Premises and stated hypotheses
  1. HypothesisRegular J with geometrically integral special fibre

    This is why an arbitrary vertical divisor has just this one coefficient.

    Scope & sources
  2. HypothesisBoth model lines have integral unit origin rigidifications

    Retain the native absolute value and the actual model lines.

    Scope & sources
How the deduction works

Pulling a[J_s] to the zero section gives valuation a. Both origin frames are units, so that valuation is zero.

Conclusion / target
Internal proof availableThe quotient divisor is a[J_s] and its coefficient a is zero

The abelian scheme is regular and its special fibre is geometrically integral.

Scope & sources
Evidence and further reading
Back to connection 01 in the diagram ↑
02AND · The generic rank-zero rigidified identity AND extension with no vertical divisor AND Poincaré laws
Premises and stated hypotheses
  1. Internal proof availabledet K has degree zero on every fibre and defines a relative Pic⁰ point

    Rigidify along the section; the generic rank-zero determinant identity respects the unit at the origin.

    Scope & sources
  2. Internal proof availableThe quotient divisor is a[J_s] and its coefficient a is zero

    The abelian scheme is regular and its special fibre is geometrically integral.

    Scope & sources
How the deduction works

Normality extends the identity and its inverse over the whole model. The extended Poincaré multiplication laws are isometries, identifying the model metric with the canonical one.

Conclusion / target
Internal proof availableThe normalized determinant model metric is the canonical rigidified Poincaré metric

An ambient model reduces to this case only when its derived pushforward to the source curve is perfect.

Scope & sources
Evidence and further reading
Back to connection 02 in the diagram ↑
All 6 nodes: scope, status and sources
Internal proof availableThe normalized determinant model metric is the canonical rigidified Poincaré metric

Conclusion / target

An ambient model reduces to this case only when its derived pushforward to the source curve is perfect.

Read the linked statement

Back to this node in the diagram ↑
Internal proof availabledet K has degree zero on every fibre and defines a relative Pic⁰ point

Premise

Rigidify along the section; the generic rank-zero determinant identity respects the unit at the origin.

Read the linked statement

Back to this node in the diagram ↑
Internal proof availableThe quotient divisor is a[J_s] and its coefficient a is zero

Premise

The abelian scheme is regular and its special fibre is geometrically integral.

Read the linked statement

Back to this node in the diagram ↑
HypothesisRegular J with geometrically integral special fibre

Premise

This is why an arbitrary vertical divisor has just this one coefficient.

Read the linked statement

Back to this node in the diagram ↑
HypothesisBoth model lines have integral unit origin rigidifications

Premise

Retain the native absolute value and the actual model lines.

Read the linked statement

Back to this node in the diagram ↑
HypothesisThe Poincaré multiplication laws extend over the abelian scheme

Premise

The induced model maps are isometries.

Read the linked statement

Back to this node in the diagram ↑
Back to diagram ↑

Remaining problem

Agreement of the analytic, arithmetic-model and determinant constructions requires the stated comparison. For arbitrary bad reduction, the missing part is the corresponding admissible metric and its comparison identity.