OpenMath

Progress · independent proof diagram

Products of curves and surfaces

Subject to the product-model theorem, the construction covers every complementary pair of homologically trivial Chow groups on a product of arbitrary curves and surfaces, and on the stated Chow-motive summands of such products.

Conditional theorem with an additional model hypothesis · Source edition v0.5.1

Domain of the result

Vr(X)×Vn+1−r(X)V^r(X)\times V^{n+1-r}(X), where X=T×∏aCa×∏bSbX=T\times\prod_a C_a\times\prod_b S_b, the CaC_a are smooth projective curves, the SbS_b are smooth projective surfaces, and TT has potentially good projective reduction at every finite place. One may take TT to be a point.

Read the diagrams from top to bottom. Select a numbered connection for its exact hypotheses and deduction, or follow a node to its source. Analytic, model and comparison assumptions retain their stated scope.

How to read the logic

Read from top to bottom. Parallel premises meet at a numbered connection, then lead to a conclusion. Select a connection to read its hypotheses and deduction; select a node to read the linked statement.

AND All inputs are requiredOR Alternative complete routesIFF Equivalent to the whole premise bundleOPEN ⋯→ Unproved bridgeBarred link The implication failsGrey dashed Supporting rule or context
Published inputInternal proof availableConditionalStated hypothesisOpenDraft

The full scope of each occurrence is recorded below its diagram. A proved conditional implication and an open geometric premise keep their separate statuses.

LOGIC 01

Products of curves and surfaces

Low-dimensional endpoints and potential good reduction cover the boundary cases. For nonempty products of dimension at least three, the model inverse, odd weights and native descent give the conditional local argument.

Scope. All Chow groups have rational coefficients. Vʳ means geometric homological triviality, component by component. Local assertions use the original finite valued field K/ℚₚ; global assertions use a number field F, n=dim X and 1≤r≤n, s=n+1−r.

Premises → connection → conclusion
Products of curves and surfacesRead from top to bottom: parallel premises meet at a numbered AND, OR or IFF junction, followed by the conclusion. Dashed OPEN links are unproved bridges; barred links do not assert an implication. Grey links identify supporting rules or context. Each node and connection links to its complete hypotheses and sources below the diagram.The product-model inverse is an additional hypothesis. G is a rational Chow-correspondence matrix of codimension d−1 and A has codimension d+1 on d-dimensional components. Its identity must hold in every cohomological degree and Tate twist, including transcendental and exceptional summands.HYPOTHESISThe product-model inverseis an additional hypothesisScope & sourcesUse AᴴGᴴAᴴ=Aᴴ on FULL cohomology. If p(x)∈ker Aᴺ, x♭=x−GᴴAᴴx has the same numerical image and Aᴴx♭=0. If α is algebraic and lies in im Aᴴ, then Gᴴα is algebraic and AᴴGᴴα=α.AND · Deduction 01Read hypotheses & proofOb¹X vanishes on homologically trivial divisors. The linked complete proof passes from geometric homological triviality to rational algebraic triviality and then uses the independent compact/Poincaré construction under (A1), (A2) and (R). It produces a global primitive for the prescribed curvature, as well as exact-support strong G.CONDITIONALOb¹X vanishes onhomologically trivialdivisorsScope & sourcesObⁿX vanishes on homologically trivial zero-cycles. The linked complete proof uses degree zero on each geometric component, geometric point-difference families, and the same compact/Poincaré theorem under (A1), (A2) and (R). The conclusion concerns the original actual model curvature, not arbitrary atomic forms.CONDITIONALObⁿX vanishes onhomologically trivialzero-cyclesScope & sourcesNumerical-kernel lifting and actual-span saturation. A=σρ and the actual algebraic G preserve numerical equivalence and actual algebraic class spans.CONDITIONALNumerical-kernel liftingand actual-spansaturationScope & sourcesThe supplied model comparison and native descent. Use the stated actual-obstruction, numerical-model, dominant-detection and finite-trace interfaces; their analytic audit is unfinished. Retain full generic and field degrees and the original absolute value. The final form uses the original specified support and all actual tests.HYPOTHESISThe supplied modelcomparison and nativedescentScope & sourcesT has potential smooth projective good reduction. Choose a finite valued L/K and a smooth projective model of T_L. For the global height conclusion this hypothesis is required at every finite place, separately.HYPOTHESIST has potential smoothprojective good reductionScope & sourcesThe finite good-cover proof gives ObʳX([Z])=0. The complete branch below compares the original pulled curvature with a zero good-model curvature, then descends the original permitted line sums. It uses the stated analytic interfaces and does not trace an arbitrary primitive.CONDITIONALThe finite good-coverproof gives ObʳX([Z])=0Scope & sourcesOne common semistable product witness. After finite extension take projective strictly semistable alterations of the curve/surface factors and a smooth projective model of T. Repair later ramified base changes before taking the ordered staircase resolution. Keep all connected intersections.HYPOTHESISOne common semistableproduct witnessScope & sourcesOdd-weight vanishing on the same witness. Weight–monodromy for all cohomological degrees of curves and surfaces, the pure unramified good coefficient, and Künneth give the companion odd-weight condition. The comparison from this condition to the actual inertia term is retained.HYPOTHESISOdd-weight vanishing onthe same witnessScope & sources1≤n≤2 and 1≤r≤n. For a curve r=1=n; for a surface the only positive degrees are r=1 and r=2=n.HYPOTHESIS1≤n≤2 and 1≤r≤nScope & sourcesm=0, X=T and n≥1. There are no curve or surface factors. The degree range remains 1≤r≤n; the zero-dimensional coefficient contributes no such degree.HYPOTHESISm=0, X=T and n≥1Scope & sourcesm≥1 and n≥3. DP20 states the product theorem for m≥1 and handles n≤2 first by endpoints. Its proof invokes the AK19 model criterion only after assuming n≥3.HYPOTHESISm≥1 and n≥3Scope & sourcesThe dimension range + the divisor and zero-cycle constructions. When 1≤n≤2 every 1≤r≤n is either r=1 or r=n. The two endpoint theorems therefore annihilate the original obstruction in every required degree; no AK19 model criterion is used.AND · Deduction 02Read hypotheses & proofEmpty-product scope + a potential smooth projective good model + native vanishing. Take the finite projection X_L→X after a valued extension admitting a smooth projective model. Apply the structured-primitive and composite-trace proof with full degree [L:K] and the original absolute value.AND · Deduction 03Read hypotheses & proofm≥1 and n≥3 + fixed witness + exactness + odd weights + comparison. Only this range invokes AK19. The algebraic calculation is on the actual ordered semistable witness; dominant detection and the full finite field degree descend its obstruction before the original curved pair is corrected.AND · Deduction 04Read hypotheses & proofAll positive degrees are endpoint degrees when n≤2. This branch applies to any of the permitted products with 1≤n≤2, including m=0. Both endpoint proofs retain their actual-form hypotheses.CONDITIONALAll positive degrees areendpoint degrees whenn≤2Scope & sourcesThe fixed product model gives native obstruction zero. This is the DP20 branch for a nonempty curve/surface product of dimension at least three. All original model and analytic assumptions remain in force.CONDITIONALThe fixed product modelgives native obstructionzeroScope & sourcesThe coefficient alone has zero obstruction. For m=0 the product is X=T. The finite good-cover argument below proves vanishing of the original model-curvature class over K, so it supplies the needed domain statement directly.CONDITIONALThe coefficient alone haszero obstructionScope & sourcesLow dimension OR empty product OR the higher-dimensional model route. The branches together cover the permitted product domain. The AK19 route is used only when m≥1 and n≥3. Empty products are handled by native finite good-cover obstruction vanishing, not by a converse from existence of a Green form.OR · Routes 05Read hypotheses & proofAll homological product classes have zero obstruction over K. Write m for the number of curve/surface factors and n=dim X. For 1≤r≤n use a complete branch in its stated range. Run that branch anew for every newly specified cycle after every finite K′/K; no descent of the new class to K is assumed. If n=0 there is no codimension in the stated range.CONDITIONALAll homological productclasses have zeroobstruction over KScope & sourcesAdmitted-domain reciprocity at every finite completion. The global input supplies independence, reciprocity, archimedean terms and rational-equivalence descent. Potentially good projective reduction of T is required separately at each finite place and persists after finite extension.HYPOTHESISAdmitted-domainreciprocity at everyfinite completionScope & sourcesThe all-degree local result + the global height hypotheses. Apply the local argument in r and s=n+1−r at every finite completion; both whole homologically trivial groups are then admitted.AND · Deduction 06Read hypotheses & proofAll complementary pairings on T × ∏Cₐ × ∏Sᵦ. The curves and surfaces are arbitrary smooth projective geometrically integral varieties. T may be a point; otherwise it has potentially good projective reduction at every finite place.CONDITIONALAll complementary pairingson T × ∏Cₐ × ∏SᵦScope & sources

Scroll inside the frame to follow a large branch. “Fit width” shows the whole layout; “Readable size” restores the text to 100%.

Read the 6 connections

Each numbered card gives the exact inputs, the deduction and its sources.

01AND · Use AᴴGᴴAᴴ=Aᴴ on FULL cohomology
Premises and stated hypotheses
  1. HypothesisThe product-model inverse is an additional hypothesis

    G is a rational Chow-correspondence matrix of codimension d−1 and A has codimension d+1 on d-dimensional components. Its identity must hold in every cohomological degree and Tate twist, including transcendental and exceptional summands.

    Scope & sources
How the deduction works

If p(x)∈ker Aᴺ, x♭=x−GᴴAᴴx has the same numerical image and Aᴴx♭=0. If α is algebraic and lies in im Aᴴ, then Gᴴα is algebraic and AᴴGᴴα=α.

Conclusion / target
ConditionalNumerical-kernel lifting and actual-span saturation

A=σρ and the actual algebraic G preserve numerical equivalence and actual algebraic class spans.

Scope & sources
Evidence and further reading
Back to connection 01 in the diagram ↑
02AND · The dimension range + the divisor and zero-cycle constructions
Premises and stated hypotheses
  1. Hypothesis1≤n≤2 and 1≤r≤n

    For a curve r=1=n; for a surface the only positive degrees are r=1 and r=2=n.

    Scope & sources
  2. ConditionalOb¹X vanishes on homologically trivial divisors

    The linked complete proof passes from geometric homological triviality to rational algebraic triviality and then uses the independent compact/Poincaré construction under (A1), (A2) and (R). It produces a global primitive for the prescribed curvature, as well as exact-support strong G.

    Scope & sources
  3. ConditionalObⁿX vanishes on homologically trivial zero-cycles

    The linked complete proof uses degree zero on each geometric component, geometric point-difference families, and the same compact/Poincaré theorem under (A1), (A2) and (R). The conclusion concerns the original actual model curvature, not arbitrary atomic forms.

    Scope & sources
How the deduction works

When 1≤n≤2 every 1≤r≤n is either r=1 or r=n. The two endpoint theorems therefore annihilate the original obstruction in every required degree; no AK19 model criterion is used.

Conclusion / target
ConditionalAll positive degrees are endpoint degrees when n≤2

This branch applies to any of the permitted products with 1≤n≤2, including m=0. Both endpoint proofs retain their actual-form hypotheses.

Scope & sources
Evidence and further reading
Back to connection 02 in the diagram ↑
03AND · Empty-product scope + a potential smooth projective good model + native vanishing
Premises and stated hypotheses
  1. Hypothesism=0, X=T and n≥1

    There are no curve or surface factors. The degree range remains 1≤r≤n; the zero-dimensional coefficient contributes no such degree.

    Scope & sources
  2. HypothesisT has potential smooth projective good reduction

    Choose a finite valued L/K and a smooth projective model of T_L. For the global height conclusion this hypothesis is required at every finite place, separately.

    Scope & sources
  3. ConditionalThe finite good-cover proof gives ObʳX([Z])=0

    The complete branch below compares the original pulled curvature with a zero good-model curvature, then descends the original permitted line sums. It uses the stated analytic interfaces and does not trace an arbitrary primitive.

    Scope & sources
How the deduction works

Take the finite projection X_L→X after a valued extension admitting a smooth projective model. Apply the structured-primitive and composite-trace proof with full degree [L:K] and the original absolute value.

Conclusion / target
ConditionalThe coefficient alone has zero obstruction

For m=0 the product is X=T. The finite good-cover argument below proves vanishing of the original model-curvature class over K, so it supplies the needed domain statement directly.

Scope & sources
Evidence and further reading
Back to connection 03 in the diagram ↑
04AND · m≥1 and n≥3 + fixed witness + exactness + odd weights + comparison
Premises and stated hypotheses
  1. Hypothesism≥1 and n≥3

    DP20 states the product theorem for m≥1 and handles n≤2 first by endpoints. Its proof invokes the AK19 model criterion only after assuming n≥3.

    Scope & sources
  2. HypothesisOne common semistable product witness

    After finite extension take projective strictly semistable alterations of the curve/surface factors and a smooth projective model of T. Repair later ramified base changes before taking the ordered staircase resolution. Keep all connected intersections.

    Scope & sources
  3. ConditionalNumerical-kernel lifting and actual-span saturation

    A=σρ and the actual algebraic G preserve numerical equivalence and actual algebraic class spans.

    Scope & sources
  4. HypothesisOdd-weight vanishing on the same witness

    Weight–monodromy for all cohomological degrees of curves and surfaces, the pure unramified good coefficient, and Künneth give the companion odd-weight condition. The comparison from this condition to the actual inertia term is retained.

    Scope & sources
  5. HypothesisThe supplied model comparison and native descent

    Use the stated actual-obstruction, numerical-model, dominant-detection and finite-trace interfaces; their analytic audit is unfinished. Retain full generic and field degrees and the original absolute value. The final form uses the original specified support and all actual tests.

    Scope & sources
How the deduction works

Only this range invokes AK19. The algebraic calculation is on the actual ordered semistable witness; dominant detection and the full finite field degree descend its obstruction before the original curved pair is corrected.

Conclusion / target
ConditionalThe fixed product model gives native obstruction zero

This is the DP20 branch for a nonempty curve/surface product of dimension at least three. All original model and analytic assumptions remain in force.

Scope & sources
Evidence and further reading
Back to connection 04 in the diagram ↑
05OR · Low dimension OR empty product OR the higher-dimensional model route
Alternative complete routes
  1. ConditionalAll positive degrees are endpoint degrees when n≤2

    This branch applies to any of the permitted products with 1≤n≤2, including m=0. Both endpoint proofs retain their actual-form hypotheses.

    Scope & sources
  2. ConditionalThe coefficient alone has zero obstruction

    For m=0 the product is X=T. The finite good-cover argument below proves vanishing of the original model-curvature class over K, so it supplies the needed domain statement directly.

    Scope & sources
  3. ConditionalThe fixed product model gives native obstruction zero

    This is the DP20 branch for a nonempty curve/surface product of dimension at least three. All original model and analytic assumptions remain in force.

    Scope & sources
How the deduction works

The branches together cover the permitted product domain. The AK19 route is used only when m≥1 and n≥3. Empty products are handled by native finite good-cover obstruction vanishing, not by a converse from existence of a Green form.

Conclusion / target
ConditionalAll homological product classes have zero obstruction over K

Write m for the number of curve/surface factors and n=dim X. For 1≤r≤n use a complete branch in its stated range. Run that branch anew for every newly specified cycle after every finite K′/K; no descent of the new class to K is assumed. If n=0 there is no codimension in the stated range.

Scope & sources
Evidence and further reading
Back to connection 05 in the diagram ↑
06AND · The all-degree local result + the global height hypotheses
Premises and stated hypotheses
  1. ConditionalAll homological product classes have zero obstruction over K

    Write m for the number of curve/surface factors and n=dim X. For 1≤r≤n use a complete branch in its stated range. Run that branch anew for every newly specified cycle after every finite K′/K; no descent of the new class to K is assumed. If n=0 there is no codimension in the stated range.

    Scope & sources
  2. HypothesisAdmitted-domain reciprocity at every finite completion

    The global input supplies independence, reciprocity, archimedean terms and rational-equivalence descent. Potentially good projective reduction of T is required separately at each finite place and persists after finite extension.

    Scope & sources
How the deduction works

Apply the local argument in r and s=n+1−r at every finite completion; both whole homologically trivial groups are then admitted.

Conclusion / target
ConditionalAll complementary pairings on T × ∏Cₐ × ∏Sᵦ

The curves and surfaces are arbitrary smooth projective geometrically integral varieties. T may be a point; otherwise it has potentially good projective reduction at every finite place.

Scope & sources
Evidence and further reading
Back to connection 06 in the diagram ↑
All 18 nodes: scope, status and sources
ConditionalAll complementary pairings on T × ∏Cₐ × ∏Sᵦ

Conclusion / target

The curves and surfaces are arbitrary smooth projective geometrically integral varieties. T may be a point; otherwise it has potentially good projective reduction at every finite place.

Read the linked statement

Back to this node in the diagram ↑
ConditionalAll homological product classes have zero obstruction over K

Premise

Write m for the number of curve/surface factors and n=dim X. For 1≤r≤n use a complete branch in its stated range. Run that branch anew for every newly specified cycle after every finite K′/K; no descent of the new class to K is assumed. If n=0 there is no codimension in the stated range.

Read the linked statement

Back to this node in the diagram ↑
ConditionalAll positive degrees are endpoint degrees when n≤2

Premise

This branch applies to any of the permitted products with 1≤n≤2, including m=0. Both endpoint proofs retain their actual-form hypotheses.

Read the linked statement

Back to this node in the diagram ↑
Hypothesis1≤n≤2 and 1≤r≤n

Premise

For a curve r=1=n; for a surface the only positive degrees are r=1 and r=2=n.

Read the linked statement

Back to this node in the diagram ↑
ConditionalOb¹X vanishes on homologically trivial divisors

Premise

The linked complete proof passes from geometric homological triviality to rational algebraic triviality and then uses the independent compact/Poincaré construction under (A1), (A2) and (R). It produces a global primitive for the prescribed curvature, as well as exact-support strong G.

Read the linked statement

Back to this node in the diagram ↑
ConditionalObⁿX vanishes on homologically trivial zero-cycles

Premise

The linked complete proof uses degree zero on each geometric component, geometric point-difference families, and the same compact/Poincaré theorem under (A1), (A2) and (R). The conclusion concerns the original actual model curvature, not arbitrary atomic forms.

Read the linked statement

Back to this node in the diagram ↑
ConditionalThe coefficient alone has zero obstruction

Premise

For m=0 the product is X=T. The finite good-cover argument below proves vanishing of the original model-curvature class over K, so it supplies the needed domain statement directly.

Read the linked statement

Back to this node in the diagram ↑
Hypothesism=0, X=T and n≥1

Premise

There are no curve or surface factors. The degree range remains 1≤r≤n; the zero-dimensional coefficient contributes no such degree.

Read the linked statement

Back to this node in the diagram ↑
HypothesisT has potential smooth projective good reduction

Premise

Choose a finite valued L/K and a smooth projective model of T_L. For the global height conclusion this hypothesis is required at every finite place, separately.

Read the linked statement

Back to this node in the diagram ↑
ConditionalThe finite good-cover proof gives ObʳX([Z])=0

Premise

The complete branch below compares the original pulled curvature with a zero good-model curvature, then descends the original permitted line sums. It uses the stated analytic interfaces and does not trace an arbitrary primitive.

Read the linked statement

Back to this node in the diagram ↑
ConditionalThe fixed product model gives native obstruction zero

Premise

This is the DP20 branch for a nonempty curve/surface product of dimension at least three. All original model and analytic assumptions remain in force.

Read the linked statement

Back to this node in the diagram ↑
Hypothesism≥1 and n≥3

Premise

DP20 states the product theorem for m≥1 and handles n≤2 first by endpoints. Its proof invokes the AK19 model criterion only after assuming n≥3.

Read the linked statement

Back to this node in the diagram ↑
HypothesisOne common semistable product witness

Premise

After finite extension take projective strictly semistable alterations of the curve/surface factors and a smooth projective model of T. Repair later ramified base changes before taking the ordered staircase resolution. Keep all connected intersections.

Read the linked statement

Back to this node in the diagram ↑
ConditionalNumerical-kernel lifting and actual-span saturation

Premise

A=σρ and the actual algebraic G preserve numerical equivalence and actual algebraic class spans.

Read the linked statement

Back to this node in the diagram ↑
HypothesisThe product-model inverse is an additional hypothesis

Premise

G is a rational Chow-correspondence matrix of codimension d−1 and A has codimension d+1 on d-dimensional components. Its identity must hold in every cohomological degree and Tate twist, including transcendental and exceptional summands.

Read the linked statement

Back to this node in the diagram ↑
HypothesisOdd-weight vanishing on the same witness

Premise

Weight–monodromy for all cohomological degrees of curves and surfaces, the pure unramified good coefficient, and Künneth give the companion odd-weight condition. The comparison from this condition to the actual inertia term is retained.

Read the linked statement

Back to this node in the diagram ↑
HypothesisThe supplied model comparison and native descent

Premise

Use the stated actual-obstruction, numerical-model, dominant-detection and finite-trace interfaces; their analytic audit is unfinished. Retain full generic and field degrees and the original absolute value. The final form uses the original specified support and all actual tests.

Read the linked statement

Back to this node in the diagram ↑
HypothesisAdmitted-domain reciprocity at every finite completion

Premise

The global input supplies independence, reciprocity, archimedean terms and rational-equivalence descent. Potentially good projective reduction of T is required separately at each finite place and persists after finite extension.

Read the linked statement

Back to this node in the diagram ↑
Back to diagram ↑

LOGIC 02

The finite good-cover proof for the coefficient alone

Resolve the prescribed pulled cycle on the good model, obtain zero native curvature, compare the original curvature globally, and descend only the original permitted line sums.

Scope. K/ℚp is finite with its original absolute value. Let X/K be smooth projective geometrically integral, n=dim X≥1, 1≤r≤n, and Z a prescribed rational cycle with zero geometric ℓ-adic class for one ℓ≠p. Assume X_L has a smooth projective model over L° for a finite valued L/K. The actual Chern, numerical detector, structured primitive, minimal trace, Stokes and current-injectivity interfaces remain explicit conditional inputs.

Premises → connection → conclusion
The finite good-cover proof for the coefficient aloneRead from top to bottom: parallel premises meet at a numbered AND, OR or IFF junction, followed by the conclusion. Dashed OPEN links are unproved bridges; barred links do not assert an implication. Grey links identify supporting rules or context. Each node and connection links to its complete hypotheses and sources below the diagram.Resolve the actual flat closures on the fixed smooth model. The smooth projective L°-model is regular and has an ample line bundle. Repeated surjections from sums of negative ample twists terminate in a locally free kernel, giving finite global resolutions of every prescribed component closure without modifying the good model. Their degree-r generic character is h*[Z].CONDITIONALResolve the actual flatclosures on the fixedsmooth modelScope & sourcesEvery integral vertical r-cycle has zero Chern degree. Smooth proper base change identifies the geometric special Chern class with the zero generic class. Over K° the special fiber is the e(L/K)-fold nilpotent thickening of its L° reduction. Integral cycles lie on that reduction; residue-field change multiplies degrees by f(L/K), so each degree stays zero. Retain all native multiplicities.CONDITIONALEvery integral verticalr-cycle has zero CherndegreeScope & sourcesh:Y=X_L→X is finite flat of degree a=[L:K]. X/K is smooth projective geometrically integral and L/K is finite valued with a smooth projective model of X_L. Regard Y and that model natively over K. Flat pullback includes the generic scheme lengths and preserves geometric homological triviality.HYPOTHESISh:Y=X_L→X is finite flatof degree a=[L:K]Scope & sourcesThe actual numerical model-Chern detector. This is an analytic input, applied on the projective flat native K°-model and tested against every integral vertical r-cycle. Its output is equality as a K-actual form, not merely vanishing of a current or a cohomology class; the independent analytic audit remains unfinished.HYPOTHESISThe actual numericalmodel-Chern detectorScope & sourcesFinite good model + fixed-model resolutions + every native vertical degree zero + detector. Smooth proper base change annihilates the geometric special Chern class. Every integral vertical r-cycle lies on the reduction of the native special fiber; its intersection degree is zero. The native numerical model-Chern detector then annihilates the actual curvature.AND · Deduction 01Read hypotheses & proofThe resolved pulled cycle has zero K-actual curvature. The numerical detector is applied directly to the good model viewed over K°, including its nonreduced native special fiber. Equality on a smaller collection of L-tests is not substituted for the K-actual assertion.CONDITIONALThe resolved pulled cyclehas zero K-actualcurvatureScope & sourcesThe global Chow-zero primitive retains its original line sums. The Adams degree-r projector reduces a generic Chow-zero character to a generically K₀-zero virtual class. The finite K₀ relation is resolved by generically acyclic complexes, whose exact generic open is all Y. Their construction gives finite-flat bⱼ on all Y and the permitted global Gⱼ used above. The strict actual Chern and minimal-trace interfaces remain assumptions.HYPOTHESISThe global Chow-zeroprimitive retains itsoriginal line sumsScope & sourcesh*ΩX−Ωgood has generic degree-r Chow class zero. Choose ΩX for the original specified cycle and compare on a common model of Y. Strict Chern pullback and invariance of the original model metrics under refinement preserve h*ΩX. The resolutions have the same generic class h*[Z], and Ωgood=0 by the preceding calculation.CONDITIONALh*ΩX−Ωgood has genericdegree-r Chow class zeroScope & sourcesZero good-model curvature + a generic Chow-zero difference + constructive primitives. On a common projective model compare h*ΩX with the actual character of the good-model resolutions of h*Z. The latter is zero; both characters represent h*[Z], so their difference has generic degree-r Chow class zero. Use the global generically acyclic construction before tracing.AND · Deduction 02Read hypotheses & proofDβY=h*ΩX with βY=Σⱼqⱼdⱼ⁻¹Tr(bⱼ)(Gⱼ). Each bⱼ is finite flat on all of Y, each Gⱼ is an original global PL-scalar/model-curvature line sum, DGⱼ=bⱼ*Ωⱼ, and ΣⱼqⱼΩⱼ=h*ΩX. These stronger constructive data permit the later composite trace.CONDITIONALDβY=h*ΩX withβY=Σⱼqⱼdⱼ⁻¹Tr(bⱼ)(Gⱼ)Scope & sourcesComposite minimal trace, native degree, Stokes and current injectivity. Each h∘bⱼ is finite flat on all X with complete degree a dⱼ. Trace the original Gⱼ in the permitted module, with normalization (a dⱼ)⁻¹ and the original absolute value. The calculation uses every compact K-actual complementary test. No general trace on an arbitrary already constructed βY is assumed.HYPOTHESISComposite minimal trace,native degree, Stokes andcurrent injectivityScope & sourcesA structured global primitive upstairs + permitted composite traces downstairs. For a=[L:K] define βX=a⁻¹Σⱼqⱼdⱼ⁻¹Tr(h∘bⱼ)(Gⱼ). On each compact actual test η, the pairing is a⁻¹Σⱼqⱼ∫YΩⱼh*η=a⁻¹∫Yh*(ΩXη)=∫XΩXη. Stokes and current injectivity give DβX=ΩX.AND · Deduction 03Read hypotheses & proofObʳX([Z])=0 over the original valued field. This is the conditional native finite good-cover route used when m=0. Its proof constructs a global actual primitive of the ORIGINAL ΩX; it does not infer obstruction zero from the existence of another Green form.CONDITIONALObʳX([Z])=0 over theoriginal valued fieldScope & sourcesSEPARATE DEDUCTION OR LIMIT · 1D[GZ]+δZ=[ΩX] on every compact actual test. Use the prescribed collected cycle, its exact support and the supplied local integrability. The curved-pair theorem remains an analytic input.HYPOTHESISD[GZ]+δZ=[ΩX] on everycompact actual testScope & sourcesDβX=ΩX on all Xᵃⁿ. Use the native primitive constructed above, not a primitive defined only away from the cycle.CONDITIONALDβX=ΩX on all XᵃⁿScope & sourcesThe global native primitive + the original exact-support curved pair. Subtract the globally defined βX with DβX=ΩX from GZ on the exact prescribed complement. The all-test Stokes identity removes only the curvature term.AND · Deduction 04Read hypotheses & proofThe original GZ−βX is strong G on exactly Xᵃⁿ∖|Z|ᵃⁿ. The global primitive does not add poles or change the prescribed cycle. The original curved pair and every compact actual complementary test remain the ones used in the final identity.CONDITIONALThe original GZ−βX isstrong G on exactlyXᵃⁿ∖|Z|ᵃⁿScope & sources

Scroll inside the frame to follow a large branch. “Fit width” shows the whole layout; “Readable size” restores the text to 100%.

Read the 4 connections

Each numbered card gives the exact inputs, the deduction and its sources.

01AND · Finite good model + fixed-model resolutions + every native vertical degree zero + detector
Premises and stated hypotheses
  1. Hypothesish:Y=X_L→X is finite flat of degree a=[L:K]

    X/K is smooth projective geometrically integral and L/K is finite valued with a smooth projective model of X_L. Regard Y and that model natively over K. Flat pullback includes the generic scheme lengths and preserves geometric homological triviality.

    Scope & sources
  2. ConditionalResolve the actual flat closures on the fixed smooth model

    The smooth projective L°-model is regular and has an ample line bundle. Repeated surjections from sums of negative ample twists terminate in a locally free kernel, giving finite global resolutions of every prescribed component closure without modifying the good model. Their degree-r generic character is h*[Z].

    Scope & sources
  3. ConditionalEvery integral vertical r-cycle has zero Chern degree

    Smooth proper base change identifies the geometric special Chern class with the zero generic class. Over K° the special fiber is the e(L/K)-fold nilpotent thickening of its L° reduction. Integral cycles lie on that reduction; residue-field change multiplies degrees by f(L/K), so each degree stays zero. Retain all native multiplicities.

    Scope & sources
  4. HypothesisThe actual numerical model-Chern detector

    This is an analytic input, applied on the projective flat native K°-model and tested against every integral vertical r-cycle. Its output is equality as a K-actual form, not merely vanishing of a current or a cohomology class; the independent analytic audit remains unfinished.

    Scope & sources
How the deduction works

Smooth proper base change annihilates the geometric special Chern class. Every integral vertical r-cycle lies on the reduction of the native special fiber; its intersection degree is zero. The native numerical model-Chern detector then annihilates the actual curvature.

Conclusion / target
ConditionalThe resolved pulled cycle has zero K-actual curvature

The numerical detector is applied directly to the good model viewed over K°, including its nonreduced native special fiber. Equality on a smaller collection of L-tests is not substituted for the K-actual assertion.

Scope & sources
Evidence and further reading
Back to connection 01 in the diagram ↑
02AND · Zero good-model curvature + a generic Chow-zero difference + constructive primitives
Premises and stated hypotheses
  1. ConditionalThe resolved pulled cycle has zero K-actual curvature

    The numerical detector is applied directly to the good model viewed over K°, including its nonreduced native special fiber. Equality on a smaller collection of L-tests is not substituted for the K-actual assertion.

    Scope & sources
  2. Conditionalh*ΩX−Ωgood has generic degree-r Chow class zero

    Choose ΩX for the original specified cycle and compare on a common model of Y. Strict Chern pullback and invariance of the original model metrics under refinement preserve h*ΩX. The resolutions have the same generic class h*[Z], and Ωgood=0 by the preceding calculation.

    Scope & sources
  3. HypothesisThe global Chow-zero primitive retains its original line sums

    The Adams degree-r projector reduces a generic Chow-zero character to a generically K₀-zero virtual class. The finite K₀ relation is resolved by generically acyclic complexes, whose exact generic open is all Y. Their construction gives finite-flat bⱼ on all Y and the permitted global Gⱼ used above. The strict actual Chern and minimal-trace interfaces remain assumptions.

    Scope & sources
How the deduction works

On a common projective model compare h*ΩX with the actual character of the good-model resolutions of h*Z. The latter is zero; both characters represent h*[Z], so their difference has generic degree-r Chow class zero. Use the global generically acyclic construction before tracing.

Conclusion / target
ConditionalDβY=h*ΩX with βY=Σⱼqⱼdⱼ⁻¹Tr(bⱼ)(Gⱼ)

Each bⱼ is finite flat on all of Y, each Gⱼ is an original global PL-scalar/model-curvature line sum, DGⱼ=bⱼ*Ωⱼ, and ΣⱼqⱼΩⱼ=h*ΩX. These stronger constructive data permit the later composite trace.

Scope & sources
Evidence and further reading
Back to connection 02 in the diagram ↑
03AND · A structured global primitive upstairs + permitted composite traces downstairs
Premises and stated hypotheses
  1. ConditionalDβY=h*ΩX with βY=Σⱼqⱼdⱼ⁻¹Tr(bⱼ)(Gⱼ)

    Each bⱼ is finite flat on all of Y, each Gⱼ is an original global PL-scalar/model-curvature line sum, DGⱼ=bⱼ*Ωⱼ, and ΣⱼqⱼΩⱼ=h*ΩX. These stronger constructive data permit the later composite trace.

    Scope & sources
  2. HypothesisComposite minimal trace, native degree, Stokes and current injectivity

    Each h∘bⱼ is finite flat on all X with complete degree a dⱼ. Trace the original Gⱼ in the permitted module, with normalization (a dⱼ)⁻¹ and the original absolute value. The calculation uses every compact K-actual complementary test. No general trace on an arbitrary already constructed βY is assumed.

    Scope & sources
How the deduction works

For a=[L:K] define βX=a⁻¹Σⱼqⱼdⱼ⁻¹Tr(h∘bⱼ)(Gⱼ). On each compact actual test η, the pairing is a⁻¹Σⱼqⱼ∫YΩⱼh*η=a⁻¹∫Yh*(ΩXη)=∫XΩXη. Stokes and current injectivity give DβX=ΩX.

Conclusion / target
ConditionalObʳX([Z])=0 over the original valued field

This is the conditional native finite good-cover route used when m=0. Its proof constructs a global actual primitive of the ORIGINAL ΩX; it does not infer obstruction zero from the existence of another Green form.

Scope & sources
Evidence and further reading
Back to connection 03 in the diagram ↑
All 13 nodes: scope, status and sources
ConditionalObʳX([Z])=0 over the original valued field

Conclusion / target

This is the conditional native finite good-cover route used when m=0. Its proof constructs a global actual primitive of the ORIGINAL ΩX; it does not infer obstruction zero from the existence of another Green form.

Read the linked statement

Back to this node in the diagram ↑
ConditionalDβY=h*ΩX with βY=Σⱼqⱼdⱼ⁻¹Tr(bⱼ)(Gⱼ)

Premise

Each bⱼ is finite flat on all of Y, each Gⱼ is an original global PL-scalar/model-curvature line sum, DGⱼ=bⱼ*Ωⱼ, and ΣⱼqⱼΩⱼ=h*ΩX. These stronger constructive data permit the later composite trace.

Read the linked statement

Back to this node in the diagram ↑
ConditionalThe resolved pulled cycle has zero K-actual curvature

Premise

The numerical detector is applied directly to the good model viewed over K°, including its nonreduced native special fiber. Equality on a smaller collection of L-tests is not substituted for the K-actual assertion.

Read the linked statement

Back to this node in the diagram ↑
Hypothesish:Y=X_L→X is finite flat of degree a=[L:K]

Premise

X/K is smooth projective geometrically integral and L/K is finite valued with a smooth projective model of X_L. Regard Y and that model natively over K. Flat pullback includes the generic scheme lengths and preserves geometric homological triviality.

Read the linked statement

Back to this node in the diagram ↑
ConditionalResolve the actual flat closures on the fixed smooth model

Premise

The smooth projective L°-model is regular and has an ample line bundle. Repeated surjections from sums of negative ample twists terminate in a locally free kernel, giving finite global resolutions of every prescribed component closure without modifying the good model. Their degree-r generic character is h*[Z].

Read the linked statement

Back to this node in the diagram ↑
ConditionalEvery integral vertical r-cycle has zero Chern degree

Premise

Smooth proper base change identifies the geometric special Chern class with the zero generic class. Over K° the special fiber is the e(L/K)-fold nilpotent thickening of its L° reduction. Integral cycles lie on that reduction; residue-field change multiplies degrees by f(L/K), so each degree stays zero. Retain all native multiplicities.

Read the linked statement

Back to this node in the diagram ↑
HypothesisThe actual numerical model-Chern detector

Premise

This is an analytic input, applied on the projective flat native K°-model and tested against every integral vertical r-cycle. Its output is equality as a K-actual form, not merely vanishing of a current or a cohomology class; the independent analytic audit remains unfinished.

Read the linked statement

Back to this node in the diagram ↑
Conditionalh*ΩX−Ωgood has generic degree-r Chow class zero

Premise

Choose ΩX for the original specified cycle and compare on a common model of Y. Strict Chern pullback and invariance of the original model metrics under refinement preserve h*ΩX. The resolutions have the same generic class h*[Z], and Ωgood=0 by the preceding calculation.

Read the linked statement

Back to this node in the diagram ↑
HypothesisThe global Chow-zero primitive retains its original line sums

Premise

The Adams degree-r projector reduces a generic Chow-zero character to a generically K₀-zero virtual class. The finite K₀ relation is resolved by generically acyclic complexes, whose exact generic open is all Y. Their construction gives finite-flat bⱼ on all Y and the permitted global Gⱼ used above. The strict actual Chern and minimal-trace interfaces remain assumptions.

Read the linked statement

Back to this node in the diagram ↑
HypothesisComposite minimal trace, native degree, Stokes and current injectivity

Premise

Each h∘bⱼ is finite flat on all X with complete degree a dⱼ. Trace the original Gⱼ in the permitted module, with normalization (a dⱼ)⁻¹ and the original absolute value. The calculation uses every compact K-actual complementary test. No general trace on an arbitrary already constructed βY is assumed.

Read the linked statement

Back to this node in the diagram ↑
ConditionalThe original GZ−βX is strong G on exactly Xᵃⁿ∖|Z|ᵃⁿ

Conclusion / target

The global primitive does not add poles or change the prescribed cycle. The original curved pair and every compact actual complementary test remain the ones used in the final identity.

Read the linked statement

Back to this node in the diagram ↑
ConditionalDβX=ΩX on all Xᵃⁿ

Premise

Use the native primitive constructed above, not a primitive defined only away from the cycle.

Read the linked statement

Back to this node in the diagram ↑
HypothesisD[GZ]+δZ=[ΩX] on every compact actual test

Premise

Use the prescribed collected cycle, its exact support and the supplied local integrability. The curved-pair theorem remains an analytic input.

Read the linked statement

Back to this node in the diagram ↑
Back to diagram ↑

LOGIC 03

The complete product-model decomposition

The supplied reconstruction retains the full boundary and every exceptional copy before splitting the transcendental sectors.

Scope. All Chow groups have rational coefficients. Vʳ means geometric homological triviality, component by component. Local assertions use the original finite valued field K/ℚₚ; global assertions use a number field F, n=dim X and 1≤r≤n, s=n+1−r.

Premises → connection → conclusion
The complete product-model decompositionRead from top to bottom: parallel premises meet at a numbered AND, OR or IFF junction, followed by the conclusion. Dashed OPEN links are unproved bridges; barred links do not assert an implication. Grey links identify supporting rules or context. Each node and connection links to its complete hypotheses and sources below the diagram.The refined surface projector kills boundary-supported classes. Boundary curves and points carry no image of the selected H²tr projector. Künneth with supports applies after the actual deletion maps.DRAFT · AUDIT PENDINGThe refined surfaceprojector killsboundary-supportedclassesScope & sourcesEach component is a tower of full-boundary stratum blowups. The staircase rays have height one and maximal-chain differences form an integral basis. Binary staircase induction gives a regular projective strictly semistable model; all original and exceptional boundary rays remain actual neighboring components.DRAFT · AUDIT PENDINGEach component is a towerof full-boundary stratumblowupsScope & sourcesTransport every actual double and normal self-intersection. Same-label terms use f′∗f′*=1; changing-label restrictions and Gysin terms vanish. The diagonal is the negative sum of all incident double-divisor classes because the reduced total special fiber is principal.DRAFT · AUDIT PENDINGTransport every actualdouble and normalself-intersectionScope & sourcesQ=Q u_ab pr_ab v, with actual correspondence maps. The refined surface complement is Artin–Tate/Picard/Albanese; curve and point factors are abelian type. The resulting u_Qv_Q=Q is a homological retraction, without requiring a new Chow-idempotent lift.DRAFT · AUDIT PENDINGQ=Q u_ab pr_ab v, withactual correspondencemapsScope & sourcesThe selected-factor open is a literal product. On Uⱼ=Xⱼ∖∂Xⱼ the factor has one vertical ray. Deletion is U_I times the remaining model. No same-label double is hidden above a selected-factor boundary.DRAFT · AUDIT PENDINGThe selected-factor openis a literal productScope & sourcesu:M=⊕ h(Sα)⊗Lᵗα → h(D), uv=1. Blowup and projective-bundle formulas hold after every smooth projective test product. Original closed product strata, their exact Tate exponents, boundary Chern classes and relative refined intersections are retained.DRAFT · AUDIT PENDINGu:M=⊕ h(Sα)⊗Lᵗα →h(D), uv=1Scope & sourcesA generator with t₂(Xⱼ) factors through fⱼ*. The restricted tower over Uⱼ is Uⱼ×W₋ⱼ. Its actual relative Chow injection agrees there with the exterior product. Localization puts their difference over ∂Xⱼ; a full-degree alteration of each support shows that pⱼ annihilates its cohomology action.DRAFT · AUDIT PENDINGA generator with t₂(Xⱼ)factors through fⱼ*Scope & sourcesThe full boundary tower and the actual fan projection. The map is an isomorphism off the selected factor boundaries. Same-label doubles map with degree one to their deletion doubles; changing a selected label lands in its boundary.AND · Deduction 01Read hypotheses & proofSupport localization + boundary annihilation + incidence transport. The difference between two deletion pull-push operators is supported over a factor boundary. Its H²tr projector kills it; transposition gives both orders. The same calculation applies to exceptional copies.AND · Deduction 02Read hypotheses & proofThe full Chow generator decomposition + exact relative-Chow deletion. Write the component motive using actual stratum blowups and projective bundles. Every generator containing a full-surface t₂ lands in im Pⱼ and is killed by Q; all other source pieces are of abelian type.AND · Deduction 03Read hypotheses & proofQ=∏(1−Pⱼ) is a homological summand of an abelian carrier. This is a statement about the residual core after retained t₂ factors have been separated; arbitrary surface motives are not declared abelian type.DRAFT · AUDIT PENDINGQ=∏(1−Pⱼ) is ahomological summand of anabelian carrierScope & sourcesf_I:Dᵢ → (∏ⱼ∈I Xⱼ,ᵢⱼ) × W₋I. W₋I is the actual remaining staircase component, including its exceptional summands. Coordinate deletion sends each chain cone into a chain cone, giving compatible proper birational maps.DRAFT · AUDIT PENDINGf_I:Dᵢ → (∏ⱼ∈I Xⱼ,ᵢⱼ) ×W₋IScope & sourcesP_I=∏ⱼ∈I Pⱼ and APⱼ=PⱼA. Choose refined surface projectors pⱼ onto H²tr and set P_I=f_I*(p_I⊠1)f_I∗. They retain the original component labels.DRAFT · AUDIT PENDINGP_I=∏ⱼ∈I Pⱼ andAPⱼ=PⱼAScope & sourcesActual deletion maps + commuting projectors + the residual-core calculation. The projectors and their commutation are identities on full cohomology of actual rational correspondences. A new Chow-idempotent commutation is not asserted.AND · Deduction 04Read hypotheses & proofEach incidence sector is a fixed t₂ tensor times an abelian carrier. This is the additional product-model argument. The original DP20 dossier calls its statements candidates pending independent review; the diagram retains that status.DRAFT · AUDIT PENDINGEach incidence sector is afixed t₂ tensor times anabelian carrierScope & sources

Scroll inside the frame to follow a large branch. “Fit width” shows the whole layout; “Readable size” restores the text to 100%.

Read the 4 connections

Each numbered card gives the exact inputs, the deduction and its sources.

01AND · The full boundary tower and the actual fan projection
Premises and stated hypotheses
  1. Draft · audit pendingEach component is a tower of full-boundary stratum blowups

    The staircase rays have height one and maximal-chain differences form an integral basis. Binary staircase induction gives a regular projective strictly semistable model; all original and exceptional boundary rays remain actual neighboring components.

    Scope & sources
  2. Draft · audit pendingThe selected-factor open is a literal product

    On Uⱼ=Xⱼ∖∂Xⱼ the factor has one vertical ray. Deletion is U_I times the remaining model. No same-label double is hidden above a selected-factor boundary.

    Scope & sources
How the deduction works

The map is an isomorphism off the selected factor boundaries. Same-label doubles map with degree one to their deletion doubles; changing a selected label lands in its boundary.

Conclusion / target
Draft · audit pendingf_I:Dᵢ → (∏ⱼ∈I Xⱼ,ᵢⱼ) × W₋I

W₋I is the actual remaining staircase component, including its exceptional summands. Coordinate deletion sends each chain cone into a chain cone, giving compatible proper birational maps.

Scope & sources
Evidence and further reading
Back to connection 01 in the diagram ↑
02AND · Support localization + boundary annihilation + incidence transport
Premises and stated hypotheses
  1. Draft · audit pendingThe refined surface projector kills boundary-supported classes

    Boundary curves and points carry no image of the selected H²tr projector. Künneth with supports applies after the actual deletion maps.

    Scope & sources
  2. Draft · audit pendingTransport every actual double and normal self-intersection

    Same-label terms use f′∗f′*=1; changing-label restrictions and Gysin terms vanish. The diagonal is the negative sum of all incident double-divisor classes because the reduced total special fiber is principal.

    Scope & sources
How the deduction works

The difference between two deletion pull-push operators is supported over a factor boundary. Its H²tr projector kills it; transposition gives both orders. The same calculation applies to exceptional copies.

Conclusion / target
Draft · audit pendingP_I=∏ⱼ∈I Pⱼ and APⱼ=PⱼA

Choose refined surface projectors pⱼ onto H²tr and set P_I=f_I*(p_I⊠1)f_I∗. They retain the original component labels.

Scope & sources
Evidence and further reading
Back to connection 02 in the diagram ↑
03AND · The full Chow generator decomposition + exact relative-Chow deletion
Premises and stated hypotheses
  1. Draft · audit pendingu:M=⊕ h(Sα)⊗Lᵗα → h(D), uv=1

    Blowup and projective-bundle formulas hold after every smooth projective test product. Original closed product strata, their exact Tate exponents, boundary Chern classes and relative refined intersections are retained.

    Scope & sources
  2. Draft · audit pendingA generator with t₂(Xⱼ) factors through fⱼ*

    The restricted tower over Uⱼ is Uⱼ×W₋ⱼ. Its actual relative Chow injection agrees there with the exterior product. Localization puts their difference over ∂Xⱼ; a full-degree alteration of each support shows that pⱼ annihilates its cohomology action.

    Scope & sources
  3. Draft · audit pendingQ=Q u_ab pr_ab v, with actual correspondence maps

    The refined surface complement is Artin–Tate/Picard/Albanese; curve and point factors are abelian type. The resulting u_Qv_Q=Q is a homological retraction, without requiring a new Chow-idempotent lift.

    Scope & sources
How the deduction works

Write the component motive using actual stratum blowups and projective bundles. Every generator containing a full-surface t₂ lands in im Pⱼ and is killed by Q; all other source pieces are of abelian type.

Conclusion / target
Draft · audit pendingQ=∏(1−Pⱼ) is a homological summand of an abelian carrier

This is a statement about the residual core after retained t₂ factors have been separated; arbitrary surface motives are not declared abelian type.

Scope & sources
Evidence and further reading
Back to connection 03 in the diagram ↑
04AND · Actual deletion maps + commuting projectors + the residual-core calculation
Premises and stated hypotheses
  1. Draft · audit pendingf_I:Dᵢ → (∏ⱼ∈I Xⱼ,ᵢⱼ) × W₋I

    W₋I is the actual remaining staircase component, including its exceptional summands. Coordinate deletion sends each chain cone into a chain cone, giving compatible proper birational maps.

    Scope & sources
  2. Draft · audit pendingP_I=∏ⱼ∈I Pⱼ and APⱼ=PⱼA

    Choose refined surface projectors pⱼ onto H²tr and set P_I=f_I*(p_I⊠1)f_I∗. They retain the original component labels.

    Scope & sources
  3. Draft · audit pendingQ=∏(1−Pⱼ) is a homological summand of an abelian carrier

    This is a statement about the residual core after retained t₂ factors have been separated; arbitrary surface motives are not declared abelian type.

    Scope & sources
How the deduction works

The projectors and their commutation are identities on full cohomology of actual rational correspondences. A new Chow-idempotent commutation is not asserted.

Conclusion / target
Draft · audit pendingEach incidence sector is a fixed t₂ tensor times an abelian carrier

This is the additional product-model argument. The original DP20 dossier calls its statements candidates pending independent review; the diagram retains that status.

Scope & sources
Evidence and further reading
Back to connection 04 in the diagram ↑
All 11 nodes: scope, status and sources
Draft · audit pendingEach incidence sector is a fixed t₂ tensor times an abelian carrier

Conclusion / target

This is the additional product-model argument. The original DP20 dossier calls its statements candidates pending independent review; the diagram retains that status.

Read the linked statement

Back to this node in the diagram ↑
Draft · audit pendingf_I:Dᵢ → (∏ⱼ∈I Xⱼ,ᵢⱼ) × W₋I

Premise

W₋I is the actual remaining staircase component, including its exceptional summands. Coordinate deletion sends each chain cone into a chain cone, giving compatible proper birational maps.

Read the linked statement

Back to this node in the diagram ↑
Draft · audit pendingEach component is a tower of full-boundary stratum blowups

Premise

The staircase rays have height one and maximal-chain differences form an integral basis. Binary staircase induction gives a regular projective strictly semistable model; all original and exceptional boundary rays remain actual neighboring components.

Read the linked statement

Back to this node in the diagram ↑
Draft · audit pendingThe selected-factor open is a literal product

Premise

On Uⱼ=Xⱼ∖∂Xⱼ the factor has one vertical ray. Deletion is U_I times the remaining model. No same-label double is hidden above a selected-factor boundary.

Read the linked statement

Back to this node in the diagram ↑
Draft · audit pendingP_I=∏ⱼ∈I Pⱼ and APⱼ=PⱼA

Premise

Choose refined surface projectors pⱼ onto H²tr and set P_I=f_I*(p_I⊠1)f_I∗. They retain the original component labels.

Read the linked statement

Back to this node in the diagram ↑
Draft · audit pendingThe refined surface projector kills boundary-supported classes

Premise

Boundary curves and points carry no image of the selected H²tr projector. Künneth with supports applies after the actual deletion maps.

Read the linked statement

Back to this node in the diagram ↑
Draft · audit pendingTransport every actual double and normal self-intersection

Premise

Same-label terms use f′∗f′*=1; changing-label restrictions and Gysin terms vanish. The diagonal is the negative sum of all incident double-divisor classes because the reduced total special fiber is principal.

Read the linked statement

Back to this node in the diagram ↑
Draft · audit pendingQ=∏(1−Pⱼ) is a homological summand of an abelian carrier

Premise

This is a statement about the residual core after retained t₂ factors have been separated; arbitrary surface motives are not declared abelian type.

Read the linked statement

Back to this node in the diagram ↑
Draft · audit pendingu:M=⊕ h(Sα)⊗Lᵗα → h(D), uv=1

Premise

Blowup and projective-bundle formulas hold after every smooth projective test product. Original closed product strata, their exact Tate exponents, boundary Chern classes and relative refined intersections are retained.

Read the linked statement

Back to this node in the diagram ↑
Draft · audit pendingA generator with t₂(Xⱼ) factors through fⱼ*

Premise

The restricted tower over Uⱼ is Uⱼ×W₋ⱼ. Its actual relative Chow injection agrees there with the exterior product. Localization puts their difference over ∂Xⱼ; a full-degree alteration of each support shows that pⱼ annihilates its cohomology action.

Read the linked statement

Back to this node in the diagram ↑
Draft · audit pendingQ=Q u_ab pr_ab v, with actual correspondence maps

Premise

The refined surface complement is Artin–Tate/Picard/Albanese; curve and point factors are abelian type. The resulting u_Qv_Q=Q is a homological retraction, without requiring a new Chow-idempotent lift.

Read the linked statement

Back to this node in the diagram ↑
Back to diagram ↑

LOGIC 04

From the model sectors to an algebraic inner inverse

One common coefficient prime compares the abelian carriers with numerical motives; only their operator is inverted, then the retained transcendental factors are tensored back.

Scope. All Chow groups have rational coefficients. Vʳ means geometric homological triviality, component by component. Local assertions use the original finite valued field K/ℚₚ; global assertions use a number field F, n=dim X and 1≤r≤n, s=n+1−r.

Premises → connection → conclusion
From the model sectors to an algebraic inner inverseRead from top to bottom: parallel premises meet at a numbered AND, OR or IFF junction, followed by the conclusion. Dashed OPEN links are unproved bridges; barred links do not assert an implication. Grey links identify supporting rules or context. Each node and connection links to its complete hypotheses and sources below the diagram.The orthogonal sectors exhaust the actual component cohomology. R_I=P_I∏ₖ∉I(1−Pₖ), Σ_I R_I=1; on each sector A is the identity on the retained t₂ tensor times the residual abelian-carrier operator.DRAFT · AUDIT PENDINGThe orthogonal sectorsexhaust the actualcomponent cohomologyScope & sourcesChoose one prime for all powers of one common abelian carrier. The finite list of carriers is included in powers and Tate shifts of one B. The stated Deligne–Clozel comparison gives one invertible ℓ where numerical and geometric homological equivalence agree on all its powers; finite-constant norms retain native degrees.PUBLISHED RESULTChoose one prime for allpowers of one commonabelian carrierScope & sourcesDescend finite-field choices and add the good coefficient. Normalized Galois averaging preserves the identity because it is linear in G and A descends. For smooth projective T/R use Δ(T₀)⊠A and Δ(T₀)⊠G on every Künneth summand, including mixed classes.DRAFT · AUDIT PENDINGDescend finite-fieldchoices and add the goodcoefficientScope & sourcesInvert the operator in the numerical category. Jannsen semisimplicity gives aga=a in the opposite rectangular corner of the source and target summands. Choose an actual rational Chow representative g, then transport G_Q=u_Qgv_Q. The selected-prime comparison gives the identity in cohomology.DRAFT · AUDIT PENDINGInvert the operator in thenumerical categoryScope & sourcesTensor the core inverses, transport by f_I and sum. Retain every degree and Tate label. Tensor each inverse with the identity of its fixed t₂ factors and project by R_I. The empty-factor core has A=0. Algebraic curve/surface degree projectors come from the explicit generator decomposition.DRAFT · AUDIT PENDINGTensor the core inverses,transport by f_I and sumScope & sourcesSector decomposition + carrier inverse + tensoring and finite descent. The identity is required on full geometric cohomology, rather than only its algebraic subspace. This makes the later correction apply to all mixed classes.AND · Deduction 01Read hypotheses & proofAn actual G satisfies AᴴGᴴAᴴ=Aᴴ on all degrees. A is the actual restriction–Gysin incidence of the ordered model. The all-factor proof supplies one suitable invertible prime, not an all-prime assertion.DRAFT · AUDIT PENDINGAn actual G satisfiesAᴴGᴴAᴴ=Aᴴ on alldegreesScope & sourcesSEPARATE DEDUCTION OR LIMIT · 1Choose an actual divisor representative of the numerical inverse. Split source kernel and target image in the semisimple numerical category, invert the remaining isomorphism, and lift its finitely many entries to rational divisor correspondences.DRAFT · AUDIT PENDINGChoose an actual divisorrepresentative of thenumerical inverseScope & sourcesThe numerical-zero error one-cycle has zero ℓ-adic class. Use the algebraic inverse of L²:H²→H⁶ on a product of surfaces. It sends the error to a numerical-zero divisor, hence a homological-zero divisor; apply L² again. Native-to-geometric numerical zero uses finite norms and the full degree.DRAFT · AUDIT PENDINGThe numerical-zero errorone-cycle has zero ℓ-adicclassScope & sourcesNumerical semisimplicity + the product-of-surfaces curve comparison. The comparison is applied to the error correspondence itself. Thus its cycle class vanishes, giving equality on all cohomology; no algebraicity of every H² class is assumed.AND · Deduction 02Read hypotheses & proofFor one surface: the inverse works on full component cohomology. On surface components A has codimension 3 and its numerical generalized inverse G has codimension 1. The error AGA−A is a numerically zero one-cycle on each fourfold Dᵢ×Dⱼ.DRAFT · AUDIT PENDINGFor one surface: theinverse works on fullcomponent cohomologyScope & sources

Scroll inside the frame to follow a large branch. “Fit width” shows the whole layout; “Readable size” restores the text to 100%.

Read the 2 connections

Each numbered card gives the exact inputs, the deduction and its sources.

01AND · Sector decomposition + carrier inverse + tensoring and finite descent
Premises and stated hypotheses
  1. Draft · audit pendingThe orthogonal sectors exhaust the actual component cohomology

    R_I=P_I∏ₖ∉I(1−Pₖ), Σ_I R_I=1; on each sector A is the identity on the retained t₂ tensor times the residual abelian-carrier operator.

    Scope & sources
  2. Published resultChoose one prime for all powers of one common abelian carrier

    The finite list of carriers is included in powers and Tate shifts of one B. The stated Deligne–Clozel comparison gives one invertible ℓ where numerical and geometric homological equivalence agree on all its powers; finite-constant norms retain native degrees.

    Scope & sources
  3. Draft · audit pendingInvert the operator in the numerical category

    Jannsen semisimplicity gives aga=a in the opposite rectangular corner of the source and target summands. Choose an actual rational Chow representative g, then transport G_Q=u_Qgv_Q. The selected-prime comparison gives the identity in cohomology.

    Scope & sources
  4. Draft · audit pendingTensor the core inverses, transport by f_I and sum

    Retain every degree and Tate label. Tensor each inverse with the identity of its fixed t₂ factors and project by R_I. The empty-factor core has A=0. Algebraic curve/surface degree projectors come from the explicit generator decomposition.

    Scope & sources
  5. Draft · audit pendingDescend finite-field choices and add the good coefficient

    Normalized Galois averaging preserves the identity because it is linear in G and A descends. For smooth projective T/R use Δ(T₀)⊠A and Δ(T₀)⊠G on every Künneth summand, including mixed classes.

    Scope & sources
How the deduction works

The identity is required on full geometric cohomology, rather than only its algebraic subspace. This makes the later correction apply to all mixed classes.

Conclusion / target
Draft · audit pendingAn actual G satisfies AᴴGᴴAᴴ=Aᴴ on all degrees

A is the actual restriction–Gysin incidence of the ordered model. The all-factor proof supplies one suitable invertible prime, not an all-prime assertion.

Scope & sources
Evidence and further reading
Back to connection 01 in the diagram ↑
All 9 nodes: scope, status and sources
Draft · audit pendingAn actual G satisfies AᴴGᴴAᴴ=Aᴴ on all degrees

Conclusion / target

A is the actual restriction–Gysin incidence of the ordered model. The all-factor proof supplies one suitable invertible prime, not an all-prime assertion.

Read the linked statement

Back to this node in the diagram ↑
Draft · audit pendingThe orthogonal sectors exhaust the actual component cohomology

Premise

R_I=P_I∏ₖ∉I(1−Pₖ), Σ_I R_I=1; on each sector A is the identity on the retained t₂ tensor times the residual abelian-carrier operator.

Read the linked statement

Back to this node in the diagram ↑
Published resultChoose one prime for all powers of one common abelian carrier

Premise

The finite list of carriers is included in powers and Tate shifts of one B. The stated Deligne–Clozel comparison gives one invertible ℓ where numerical and geometric homological equivalence agree on all its powers; finite-constant norms retain native degrees.

Read the linked statement

Back to this node in the diagram ↑
Draft · audit pendingInvert the operator in the numerical category

Premise

Jannsen semisimplicity gives aga=a in the opposite rectangular corner of the source and target summands. Choose an actual rational Chow representative g, then transport G_Q=u_Qgv_Q. The selected-prime comparison gives the identity in cohomology.

Read the linked statement

Back to this node in the diagram ↑
Draft · audit pendingTensor the core inverses, transport by f_I and sum

Premise

Retain every degree and Tate label. Tensor each inverse with the identity of its fixed t₂ factors and project by R_I. The empty-factor core has A=0. Algebraic curve/surface degree projectors come from the explicit generator decomposition.

Read the linked statement

Back to this node in the diagram ↑
Draft · audit pendingDescend finite-field choices and add the good coefficient

Premise

Normalized Galois averaging preserves the identity because it is linear in G and A descends. For smooth projective T/R use Δ(T₀)⊠A and Δ(T₀)⊠G on every Künneth summand, including mixed classes.

Read the linked statement

Back to this node in the diagram ↑
Draft · audit pendingFor one surface: the inverse works on full component cohomology

Conclusion / target

On surface components A has codimension 3 and its numerical generalized inverse G has codimension 1. The error AGA−A is a numerically zero one-cycle on each fourfold Dᵢ×Dⱼ.

Read the linked statement

Back to this node in the diagram ↑
Draft · audit pendingChoose an actual divisor representative of the numerical inverse

Premise

Split source kernel and target image in the semisimple numerical category, invert the remaining isomorphism, and lift its finitely many entries to rational divisor correspondences.

Read the linked statement

Back to this node in the diagram ↑
Draft · audit pendingThe numerical-zero error one-cycle has zero ℓ-adic class

Premise

Use the algebraic inverse of L²:H²→H⁶ on a product of surfaces. It sends the error to a numerical-zero divisor, hence a homological-zero divisor; apply L² again. Native-to-geometric numerical zero uses finite norms and the full degree.

Read the linked statement

Back to this node in the diagram ↑
Back to diagram ↑

LOGIC 05

Chow motives generated by curves and surfaces

Actual inclusions and retractions transfer all shifted classes; arbitrary abelian factors enter through a generically finite addition map from a product of curves.

Scope. All Chow groups have rational coefficients. Vʳ means geometric homological triviality, component by component. Local assertions use the original finite valued field K/ℚₚ; global assertions use a number field F, n=dim X and 1≤r≤n, s=n+1−r.

Premises → connection → conclusion
Chow motives generated by curves and surfacesRead from top to bottom: parallel premises meet at a numbered AND, OR or IFF junction, followed by the conclusion. Dashed OPEN links are unproved bridges; barred links do not assert an implication. Grey links identify supporting rules or context. Each node and connection links to its complete hypotheses and sources below the diagram.The addition map Cᵍ→A is dominant of degree d. Source and target both have dimension g. Dimension one is immediate and dimension zero is the unit motive.INTERNAL PROOF AVAILABLEThe addition map Cᵍ→A isdominant of degree dScope & sourcesf∗f*=dΔ_A gives the retraction d⁻¹f∗. This is a Chow correspondence identity after every smooth projective test product.INTERNAL PROOF AVAILABLEf∗f*=dΔ_A gives theretraction d⁻¹f∗Scope & sourcesDominant addition + equal dimension + the degree projection formula. Successive sums of C grow until they fill A: a proper stabilized image would be invariant under the group generated by C. Therefore Cᵍ→A is generically finite of degree d>0.AND · Deduction 01Read hypotheses & proofThe conditional curve–surface product theorem. Use the low-dimensional endpoint, empty-product good-reduction, or higher-dimensional product-model branch in its stated range. Retain its analytic hypotheses and, for the last branch, the additional model hypothesis. At every finite place T must have potentially good projective reduction.CONDITIONALThe conditionalcurve–surface producttheoremScope & sourcesThe inclusion/retraction composites sum to Δ_X. The decomposition is in rational Chow motives with the stated Tate shifts. Every image class remains geometrically homologically trivial.HYPOTHESISThe inclusion/retractioncomposites sum to Δ_XScope & sourcesA g-dimensional abelian factor retracts from Cᵍ. After finite extension choose a pointed smooth complete-intersection curve C with C−C generating A.INTERNAL PROOF AVAILABLEA g-dimensional abelianfactor retracts from CᵍScope & sourcesAn actual diagonal certificate + admission of every intermediate degree. Insert each inclusion and retraction, tensor with Δ_T when needed, and use the general Chow transfer. Field descent uses the complete degree.AND · Deduction 02Read hypotheses & proofThe full pairing passes to the stated surface-generated Chow domain. After finite extension, h(X) is a summand of a finite sum of Tate twists of curve/surface products. This also covers T×X with the permitted coefficient, and arbitrary abelian factors.CONDITIONALThe full pairing passes tothe statedsurface-generated ChowdomainScope & sources

Scroll inside the frame to follow a large branch. “Fit width” shows the whole layout; “Readable size” restores the text to 100%.

Read the 2 connections

Each numbered card gives the exact inputs, the deduction and its sources.

01AND · Dominant addition + equal dimension + the degree projection formula
Premises and stated hypotheses
  1. Internal proof availableThe addition map Cᵍ→A is dominant of degree d

    Source and target both have dimension g. Dimension one is immediate and dimension zero is the unit motive.

    Scope & sources
  2. Internal proof availablef∗f*=dΔ_A gives the retraction d⁻¹f∗

    This is a Chow correspondence identity after every smooth projective test product.

    Scope & sources
How the deduction works

Successive sums of C grow until they fill A: a proper stabilized image would be invariant under the group generated by C. Therefore Cᵍ→A is generically finite of degree d>0.

Conclusion / target
Internal proof availableA g-dimensional abelian factor retracts from Cᵍ

After finite extension choose a pointed smooth complete-intersection curve C with C−C generating A.

Scope & sources
Evidence and further reading
Back to connection 01 in the diagram ↑
02AND · An actual diagonal certificate + admission of every intermediate degree
Premises and stated hypotheses
  1. HypothesisThe inclusion/retraction composites sum to Δ_X

    The decomposition is in rational Chow motives with the stated Tate shifts. Every image class remains geometrically homologically trivial.

    Scope & sources
  2. Internal proof availableA g-dimensional abelian factor retracts from Cᵍ

    After finite extension choose a pointed smooth complete-intersection curve C with C−C generating A.

    Scope & sources
  3. ConditionalThe conditional curve–surface product theorem

    Use the low-dimensional endpoint, empty-product good-reduction, or higher-dimensional product-model branch in its stated range. Retain its analytic hypotheses and, for the last branch, the additional model hypothesis. At every finite place T must have potentially good projective reduction.

    Scope & sources
How the deduction works

Insert each inclusion and retraction, tensor with Δ_T when needed, and use the general Chow transfer. Field descent uses the complete degree.

Conclusion / target
ConditionalThe full pairing passes to the stated surface-generated Chow domain

After finite extension, h(X) is a summand of a finite sum of Tate twists of curve/surface products. This also covers T×X with the permitted coefficient, and arbitrary abelian factors.

Scope & sources
Evidence and further reading
Back to connection 02 in the diagram ↑
All 6 nodes: scope, status and sources
ConditionalThe full pairing passes to the stated surface-generated Chow domain

Conclusion / target

After finite extension, h(X) is a summand of a finite sum of Tate twists of curve/surface products. This also covers T×X with the permitted coefficient, and arbitrary abelian factors.

Read the linked statement

Back to this node in the diagram ↑
HypothesisThe inclusion/retraction composites sum to Δ_X

Premise

The decomposition is in rational Chow motives with the stated Tate shifts. Every image class remains geometrically homologically trivial.

Read the linked statement

Back to this node in the diagram ↑
Internal proof availableA g-dimensional abelian factor retracts from Cᵍ

Premise

After finite extension choose a pointed smooth complete-intersection curve C with C−C generating A.

Read the linked statement

Back to this node in the diagram ↑
Internal proof availableThe addition map Cᵍ→A is dominant of degree d

Premise

Source and target both have dimension g. Dimension one is immediate and dimension zero is the unit motive.

Read the linked statement

Back to this node in the diagram ↑
Internal proof availablef∗f*=dΔ_A gives the retraction d⁻¹f∗

Premise

This is a Chow correspondence identity after every smooth projective test product.

Read the linked statement

Back to this node in the diagram ↑
ConditionalThe conditional curve–surface product theorem

Premise

Use the low-dimensional endpoint, empty-product good-reduction, or higher-dimensional product-model branch in its stated range. Retain its analytic hypotheses and, for the last branch, the additional model hypothesis. At every finite place T must have potentially good projective reduction.

Read the linked statement

Back to this node in the diagram ↑
Back to diagram ↑

LOGIC 06

Hilbert schemes of points on surfaces

The incidence correspondences reduce each homological class, with its exact dimension shift, to powers of the original surfaces.

Scope. All Chow groups have rational coefficients. Vʳ means geometric homological triviality, component by component. Local assertions use the original finite valued field K/ℚₚ; global assertions use a number field F, n=dim X and 1≤r≤n, s=n+1−r.

Premises → connection → conclusion
Hilbert schemes of points on surfacesRead from top to bottom: parallel premises meet at a numbered AND, OR or IFF junction, followed by the conclusion. Dashed OPEN links are unproved bridges; barred links do not assert an implication. Grey links identify supporting rules or context. Each node and connection links to its complete hypotheses and sources below the diagram.h(S^[m])=⊕λ (h(Sˡ⁽λ⁾),eλ)⊗Lᵐ⁻ˡ⁽λ⁾. For λ=1ᵃ¹⋯mᵃᵐ, l(λ)=Σaᵢ and eλ is the rational average of the graphs of ∏ᵢSₐᵢ. The stated de Cataldo–Migliorini Theorem 6.2.1 and Remark 6.2.2 give actual incidence correspondences.PUBLISHED RESULTh(S^[m])=⊕λ(h(Sˡ⁽λ⁾),eλ)⊗Lᵐ⁻ˡ⁽λ⁾Scope & sourcesThe conditional curve–surface product theorem. Use the low-dimensional endpoint, empty-product good-reduction, or higher-dimensional product-model branch in its stated range. Retain its analytic hypotheses and, for the last branch, the additional model hypothesis. At every finite place T must have potentially good projective reduction.CONDITIONALThe conditionalcurve–surface producttheoremScope & sourcesThe incidence composites recover the actual diagonal. The admitted intermediate classes return to the original class through Chow covariance. Apply the two-degree criterion at every completion.CONDITIONALThe incidence compositesrecover the actualdiagonalScope & sourcesA codimension-r class maps to codimension r−s. For a tuple of partitions, s=Σ(mᵢ−l(λᵢ)); the intermediate variety is T×∏Cⱼ×∏Sᵢˡ⁽λᵢ⁾ and has dimension dim X−2s. Images remain homological; degree-zero rank kernels and impossible degrees vanish.INTERNAL PROOF AVAILABLEA codimension-r class mapsto codimension r−sScope & sourcesThe actual Hilbert-scheme motive decomposition + the product theorem. Tensor the incidence correspondences and their projectors, then transfer every feasible degree. The same correspondences base change to treat every new class after finite extension.AND · Deduction 01Read hypotheses & proofAll pairings on T × ∏Cⱼ × ∏Sᵢ^[mᵢ]. The surfaces are arbitrary smooth projective geometrically integral surfaces and mᵢ≥1. T has potentially good projective reduction at every finite place.CONDITIONALAll pairings on T × ∏Cⱼ ×∏Sᵢ^[mᵢ]Scope & sources

Scroll inside the frame to follow a large branch. “Fit width” shows the whole layout; “Readable size” restores the text to 100%.

Read the 1 connection

Each numbered card gives the exact inputs, the deduction and its sources.

01AND · The actual Hilbert-scheme motive decomposition + the product theorem
Premises and stated hypotheses
  1. Published resulth(S^[m])=⊕λ (h(Sˡ⁽λ⁾),eλ)⊗Lᵐ⁻ˡ⁽λ⁾

    For λ=1ᵃ¹⋯mᵃᵐ, l(λ)=Σaᵢ and eλ is the rational average of the graphs of ∏ᵢSₐᵢ. The stated de Cataldo–Migliorini Theorem 6.2.1 and Remark 6.2.2 give actual incidence correspondences.

    Scope & sources
  2. Internal proof availableA codimension-r class maps to codimension r−s

    For a tuple of partitions, s=Σ(mᵢ−l(λᵢ)); the intermediate variety is T×∏Cⱼ×∏Sᵢˡ⁽λᵢ⁾ and has dimension dim X−2s. Images remain homological; degree-zero rank kernels and impossible degrees vanish.

    Scope & sources
  3. ConditionalThe conditional curve–surface product theorem

    Use the low-dimensional endpoint, empty-product good-reduction, or higher-dimensional product-model branch in its stated range. Retain its analytic hypotheses and, for the last branch, the additional model hypothesis. At every finite place T must have potentially good projective reduction.

    Scope & sources
  4. ConditionalThe incidence composites recover the actual diagonal

    The admitted intermediate classes return to the original class through Chow covariance. Apply the two-degree criterion at every completion.

    Scope & sources
How the deduction works

Tensor the incidence correspondences and their projectors, then transfer every feasible degree. The same correspondences base change to treat every new class after finite extension.

Conclusion / target
ConditionalAll pairings on T × ∏Cⱼ × ∏Sᵢ^[mᵢ]

The surfaces are arbitrary smooth projective geometrically integral surfaces and mᵢ≥1. T has potentially good projective reduction at every finite place.

Scope & sources
Evidence and further reading
Back to connection 01 in the diagram ↑
All 5 nodes: scope, status and sources
ConditionalAll pairings on T × ∏Cⱼ × ∏Sᵢ^[mᵢ]

Conclusion / target

The surfaces are arbitrary smooth projective geometrically integral surfaces and mᵢ≥1. T has potentially good projective reduction at every finite place.

Read the linked statement

Back to this node in the diagram ↑
Published resulth(S^[m])=⊕λ (h(Sˡ⁽λ⁾),eλ)⊗Lᵐ⁻ˡ⁽λ⁾

Premise

For λ=1ᵃ¹⋯mᵃᵐ, l(λ)=Σaᵢ and eλ is the rational average of the graphs of ∏ᵢSₐᵢ. The stated de Cataldo–Migliorini Theorem 6.2.1 and Remark 6.2.2 give actual incidence correspondences.

Read the linked statement

Back to this node in the diagram ↑
Internal proof availableA codimension-r class maps to codimension r−s

Premise

For a tuple of partitions, s=Σ(mᵢ−l(λᵢ)); the intermediate variety is T×∏Cⱼ×∏Sᵢˡ⁽λᵢ⁾ and has dimension dim X−2s. Images remain homological; degree-zero rank kernels and impossible degrees vanish.

Read the linked statement

Back to this node in the diagram ↑
ConditionalThe conditional curve–surface product theorem

Premise

Use the low-dimensional endpoint, empty-product good-reduction, or higher-dimensional product-model branch in its stated range. Retain its analytic hypotheses and, for the last branch, the additional model hypothesis. At every finite place T must have potentially good projective reduction.

Read the linked statement

Back to this node in the diagram ↑
ConditionalThe incidence composites recover the actual diagonal

Premise

The admitted intermediate classes return to the original class through Chow covariance. Apply the two-degree criterion at every completion.

Read the linked statement

Back to this node in the diagram ↑
Back to diagram ↑

LOGIC 07

Moduli spaces on K3 and abelian surfaces

A complex Chow retraction is spread together with its rational-equivalence certificate and specialized to a finite number field before local transfer.

Scope. All Chow groups have rational coefficients. Vʳ means geometric homological triviality, component by component. Local assertions use the original finite valued field K/ℚₚ; global assertions use a number field F, n=dim X and 1≤r≤n, s=n+1−r.

Premises → connection → conclusion
Moduli spaces on K3 and abelian surfacesRead from top to bottom: parallel premises meet at a numbered AND, OR or IFF junction, followed by the conclusion. Dashed OPEN links are unproved bridges; barred links do not assert an implication. Grey links identify supporting rules or context. Each node and connection links to its complete hypotheses and sources below the diagram.Spread correspondences and their finite principal-divisor witnesses. Descend the data to a finitely generated field, spread over a smooth integral finite-type F-scheme B, and shrink so fibers are smooth projective geometrically integral and cycle codimensions and the relative Chow equality are preserved.INTERNAL PROOF AVAILABLESpread correspondencesand their finiteprincipal-divisorwitnessesScope & sourcesA closed point b has finite residue field E/F. Since B is smooth, the refined fiber pullback preserves the finite certificate. This is specialization of the actual Chow equality, not just of its realization.INTERNAL PROOF AVAILABLEA closed point b has finiteresidue field E/FScope & sourcesSpread the actual equations and choose a closed point of a smooth base. Refined pullback at that point commutes with smooth pullback, proper projection and diagonal intersection, hence with the composition in the certificate.AND · Deduction 01Read hypotheses & proofBülles’s Theorem 0.1 supplies a rational Chow retraction. The intermediate motives are Tate twists of powers of the underlying surface. Keep smoothness, projectivity and the stated moduli/stability hypotheses; finite-dimensionality of the surface motive is not required.PUBLISHED RESULTBülles’s Theorem 0.1supplies a rational ChowretractionScope & sourcesComplete E/F and transfer at every original finite place. Use the surface-generated domain at a place above v, then full-degree native descent to F_v. For new cycles after finite extension repeat over a compositum and apply both-degree admission.CONDITIONALComplete E/F andtransfer at every originalfinite placeScope & sourcesProducts and Hilbert-scheme factors use tensor certificates. Intermediate varieties remain curve/surface products; the optional T is allowed when it has potentially good projective reduction at every finite place.CONDITIONALProducts andHilbert-scheme factorsuse tensor certificatesScope & sourcesA full Chow certificate specializes to finite E/F. The constant X specializes to X_E, while the finitely many auxiliary families specialize to smooth projective curves and surfaces with all degree shifts preserved.INTERNAL PROOF AVAILABLEA full Chow certificatespecializes to finite E/FScope & sourcesThe precise complex retraction + finite specialization + local transfer. The first theorem also applies to any X whose complex Chow motive retracts through products of curves and surfaces. The auxiliary varieties may change under specialization.AND · Deduction 02Read hypotheses & proofThe stated smooth projective moduli spaces have every pairing. For a smooth projective X/F, one complex embedding must identify its motive with the retraction supplied by Bülles: Gieseker-stable twisted sheaves, or stable objects for a generic stability condition, on a projective K3 or abelian surface.CONDITIONALThe stated smoothprojective moduli spaceshave every pairingScope & sources

Scroll inside the frame to follow a large branch. “Fit width” shows the whole layout; “Readable size” restores the text to 100%.

Read the 2 connections

Each numbered card gives the exact inputs, the deduction and its sources.

01AND · Spread the actual equations and choose a closed point of a smooth base
Premises and stated hypotheses
  1. Internal proof availableSpread correspondences and their finite principal-divisor witnesses

    Descend the data to a finitely generated field, spread over a smooth integral finite-type F-scheme B, and shrink so fibers are smooth projective geometrically integral and cycle codimensions and the relative Chow equality are preserved.

    Scope & sources
  2. Internal proof availableA closed point b has finite residue field E/F

    Since B is smooth, the refined fiber pullback preserves the finite certificate. This is specialization of the actual Chow equality, not just of its realization.

    Scope & sources
How the deduction works

Refined pullback at that point commutes with smooth pullback, proper projection and diagonal intersection, hence with the composition in the certificate.

Conclusion / target
Internal proof availableA full Chow certificate specializes to finite E/F

The constant X specializes to X_E, while the finitely many auxiliary families specialize to smooth projective curves and surfaces with all degree shifts preserved.

Scope & sources
Evidence and further reading
Back to connection 01 in the diagram ↑
02AND · The precise complex retraction + finite specialization + local transfer
Premises and stated hypotheses
  1. Published resultBülles’s Theorem 0.1 supplies a rational Chow retraction

    The intermediate motives are Tate twists of powers of the underlying surface. Keep smoothness, projectivity and the stated moduli/stability hypotheses; finite-dimensionality of the surface motive is not required.

    Scope & sources
  2. Internal proof availableA full Chow certificate specializes to finite E/F

    The constant X specializes to X_E, while the finitely many auxiliary families specialize to smooth projective curves and surfaces with all degree shifts preserved.

    Scope & sources
  3. ConditionalComplete E/F and transfer at every original finite place

    Use the surface-generated domain at a place above v, then full-degree native descent to F_v. For new cycles after finite extension repeat over a compositum and apply both-degree admission.

    Scope & sources
  4. ConditionalProducts and Hilbert-scheme factors use tensor certificates

    Intermediate varieties remain curve/surface products; the optional T is allowed when it has potentially good projective reduction at every finite place.

    Scope & sources
How the deduction works

The first theorem also applies to any X whose complex Chow motive retracts through products of curves and surfaces. The auxiliary varieties may change under specialization.

Conclusion / target
ConditionalThe stated smooth projective moduli spaces have every pairing

For a smooth projective X/F, one complex embedding must identify its motive with the retraction supplied by Bülles: Gieseker-stable twisted sheaves, or stable objects for a generic stability condition, on a projective K3 or abelian surface.

Scope & sources
Evidence and further reading
Back to connection 02 in the diagram ↑
All 7 nodes: scope, status and sources
ConditionalThe stated smooth projective moduli spaces have every pairing

Conclusion / target

For a smooth projective X/F, one complex embedding must identify its motive with the retraction supplied by Bülles: Gieseker-stable twisted sheaves, or stable objects for a generic stability condition, on a projective K3 or abelian surface.

Read the linked statement

Back to this node in the diagram ↑
Published resultBülles’s Theorem 0.1 supplies a rational Chow retraction

Premise

The intermediate motives are Tate twists of powers of the underlying surface. Keep smoothness, projectivity and the stated moduli/stability hypotheses; finite-dimensionality of the surface motive is not required.

Read the linked statement

Back to this node in the diagram ↑
Internal proof availableA full Chow certificate specializes to finite E/F

Premise

The constant X specializes to X_E, while the finitely many auxiliary families specialize to smooth projective curves and surfaces with all degree shifts preserved.

Read the linked statement

Back to this node in the diagram ↑
Internal proof availableSpread correspondences and their finite principal-divisor witnesses

Premise

Descend the data to a finitely generated field, spread over a smooth integral finite-type F-scheme B, and shrink so fibers are smooth projective geometrically integral and cycle codimensions and the relative Chow equality are preserved.

Read the linked statement

Back to this node in the diagram ↑
Internal proof availableA closed point b has finite residue field E/F

Premise

Since B is smooth, the refined fiber pullback preserves the finite certificate. This is specialization of the actual Chow equality, not just of its realization.

Read the linked statement

Back to this node in the diagram ↑
ConditionalComplete E/F and transfer at every original finite place

Premise

Use the surface-generated domain at a place above v, then full-degree native descent to F_v. For new cycles after finite extension repeat over a compositum and apply both-degree admission.

Read the linked statement

Back to this node in the diagram ↑
ConditionalProducts and Hilbert-scheme factors use tensor certificates

Premise

Intermediate varieties remain curve/surface products; the optional T is allowed when it has potentially good projective reduction at every finite place.

Read the linked statement

Back to this node in the diagram ↑
Back to diagram ↑

Remaining problem

The additional step is the product-model calculation on full cohomology, including its transcendental summands and exceptional components. This argument does not reduce an arbitrary surface motive to an abelian-type motive.