The geometric ingredients of the local Green construction are now available separately: completed residue fields and analytic fibres in Section 2.6, analytic flatness in Section 2.9, and Abhyankar dimension in Section 3.7. Proposition 2.6.4 gives the degree of a finite locally free fibre as a sum of lengths times residue-field degrees. In the argument below, proving that the required local map is finite and flat remains a geometric step; counting its underlying points would lose the multiplicity.
Bochner–Martinelli and Levine: what higher codimension changes
A complete intersection supplies a logarithmic maximum
Let be a pure -dimensional boundaryless analytic space in the source category. Let be a regular sequence defining a closed analytic subspace of pure codimension . On , set This is finite and continuous on . Its singularity along is exactly what is needed for a Green current. The source constructs the relevant products and extensions and states This is Theorem 18.7.2 of CLD25, explicitly attributed there to Mihatsch. For it is Poincaré–Lelong.
The expression on the left has two levels. On , the continuous-potential product is available. Extending the resulting current to uses support and dimension results. The formula does not define an unrestricted product for every unbounded on all of . CLD itself points out this limitation immediately after the theorem.
The truncation argument and the nonformal step
For define The truncated function is finite and continuous. Its top relative curvature is described by a fibre over a small Gauss point in the parameter space. For a fixed test of degree , the support and dimension lemmas ensure that the differentiated test can be treated away from in the extension argument. On the relevant compact support, sufficiently small truncations agree with .
The remaining step compares the calibrated fibre current with . This uses the variation theorem from CLD25 Chapter 14 and the regular-sequence geometry. It is the step that retains the scheme-theoretic multiplicities. The equality is therefore a theorem about the analytic complete intersection, not merely an identity of real functions on a tropical support.
There are several local typographical slips in the printed proof, including the second expression for and dimension indices. The corrected truncation above is the one used in this exposition. The theorem is also available through Mihatsch’s independent delta-form treatment, discussed in Chapter 16; the categories of representatives and tests must still be kept distinct.
The Green sign
With , the expression has bidegree and satisfies in the appropriate current realization. This computation reconciles the logarithmic-maximum convention in CLD25 with the valuation-minimum convention used in the delta-form literature. It also shows why the sign cannot be guessed from the divisor case without counting the additional factors.
Levine’s formula on projective space
Let and let be the linear subspace defined by . On , the rational projection is a morphism. Give the standard formal metric, and write The homogeneous ratios make a well-defined function on . Set After the source’s extension of to a current on , Theorem 18.7.5 gives
Away from , the algebra is transparent: , so because comes from a space of dimension . The nonformal part identifies the singular contribution along . The proof blows up the centre of projection, uses Poincaré–Lelong for the exceptional divisor, and pushes the resulting intersection current down. The exceptional fibres supply degree one, producing .
Why this does not solve every Green problem
The local formula uses a regular sequence of global functions on the chosen domain. The projective formula uses a specific linear cycle and a specific curvature term. A general homologically trivial cycle may not be globally a complete intersection, and local representatives may fail to glue in a prescribed differential-form sheaf. Even if a global Green current exists, it need not have an actual delta-form representative on the exact complement of the cycle.
Thus the formulas give substantial explicit cases and a proof mechanism. To reach a general strong Green statement, one must still specify the representative class, the full test class, the support condition, the gluing obstruction, and the descent under field extension. Chapter 24 turns these requirements into a precise comparison problem.
22.2 Green objects, star products, and local heights
The equation behind the construction
For the statements taken directly from original GK in this subsection and the next, work over a complete algebraically closed nontrivially valued field. The model examples can be compared after the base change just described. Mihatsch’s statements below have their own analytic hypotheses, which we state separately.
For a codimension- cycle , the integration current has bidegree . A Green object has bidegree and satisfies an equation where belongs to a specified class of forms. One must always state that class. In classical complex arithmetic intersection it is a class of smooth forms; in GK it is a class of -forms; in the model theory discussed below, “forms” and “currents” are classes assembled from Chow groups of models. Sharing equation (22.2.1) does not make these categories identical.
For a metrized line bundle with a nonzero meromorphic section , the basic Green potential is , where . The Poincaré–Lelong equation reads It separates two sources of singularity: the zero or pole of the section, and the curvature of the metric. For a model metric, that curvature may itself be polyhedrally singular. This is precisely why the -calculus is useful.
Suppose meets properly and the metric belongs to the GK class. The Green star product is The first term means restrict the logarithmic potential to the cycle and push its current forward to . Proper intersection ensures that this restriction is the permitted one. The second term is the action of an allowed -form on a current. These operations are part of the construction; the formula is not an invitation to multiply any two singular distributions. Applying and using the Green equations gives For two divisors, changing the order changes the representative by a - and -boundary. The class in the appropriate quotient is symmetric; integration on a proper space kills these boundaries by Stokes. This is the mechanism behind symmetry of local heights.
References. [GK17] (Definition 11.1, §11.2, Propositions 11.4–11.5 and Corollary 11.6).
The local-height recursion and metric variation
Let be proper of dimension , and take metrized divisors with properly meeting supports, or the more flexible pseudodivisors of GK with empty total intersection of supports. The integral of their star product defines a local height. Its useful computational form is the recursion Each application replaces one intersection with a lower-dimensional cycle and one analytic integral. For model metrics, this agrees with the local height defined by model intersection theory.
If only the first metric is changed to , then When the remaining metrics are semipositive, the mixed measure is positive and has mass . Hence This estimate explains why uniform approximation can extend intersection constructions in a controlled positive class. A limit argument still needs the measures, positivity, and independence of approximation to be established; continuity of functions alone supplies none of those automatically.
References. [GK17] (Propositions 12.4 and 12.6, Remark 12.7).
Example 22.2.1. (A height changes while curvature stays fixed). Use the standard model metric on from Example 20.3.1. Write and . The Green functions of the points and are and both Chern measures are , where is the Gauss point. Formula (22.2.3) gives The closures of the two points in are disjoint, giving the same model intersection. Now multiply the first norm by . Its Green function becomes , its curvature is unchanged, and its local height increases by .
Thus even the simplest local height cannot be recovered from the two curvature measures alone. Later we shall encounter a further loss of information coming from degree-zero line bundles, but scalar changes already establish the point. A theory that retains metrized line bundles contains more arithmetic information than a theory of their Chern currents.
Remark 22.2.2 (The variation bound for a signed measure). Write in (22.2.4). For a finite signed mixed measure, the general estimate is If is positive, its total variation is its mass, and the degree formula gives (22.2.5). For signed , the signed mass need not control the total variation. Positivity is therefore essential to that particular degree bound.
Higher codimension: an explicit Green form and a length formula
Mihatsch supplies a particularly concrete higher-codimension construction. Let be a good Hausdorff pure -dimensional analytic space without boundary, and suppose is a complete intersection of codimension . On set Although is expressed using a minimum, the product is defined in the specified -algebra. The theorem states including the corresponding integration identity against compactly supported -form tests. The codimension is visible in the exponent: has bidegree , as a Green object should. For , it is the familiar logarithmic function .
A separate theorem recovers formal intersection lengths. Assume is a DVR with . Let be separated and flat over , special, and pure of formal dimension . Let be a local complete intersection of pure codimension , and let be closed, Cohen–Macaulay, flat over , and pure of formal dimension . If is Artinian, the distance function defined by the ideal of gives the same expression for , and The theorem also proves the compact support needed for this integral. Flatness matters: a purely vertical formal subscheme can have empty generic fibre while retaining a nonzero intersection length. The general local-complete-intersection Green statement appears separately as a conjecture in that paper; the proved length formula must not be confused with a proof of that whole conjecture.
References. [Mih24] (Theorem 5.5, Conjecture 5.9, Corollary 5.10, and Theorem 5.11).
Example 22.2.3. (Intersection length and valuation scale). In , the sections and have intersection ring Its -length is . The Green function of the first section takes the value at the generic point of the second, where . Thus the logarithmic value equals the algebraic length under the normalization ; for the original absolute value it is the length multiplied by .
For global calculations, the 2025 BGK preprint adds another useful endpoint. Prescribed piecewise smooth Green data on an arbitrary projective variety can be expressed on a common extended tropicalization, and the corresponding local heights admit tropical formulas. The extended target includes strata at infinity; it is not merely one bounded graph. The result does not assert that every continuous singular metric is captured by one fixed finite tropicalization. It tells us that a finite collection of data in the stated class can be treated together, which is exactly what an intersection calculation requires.
References. [BGK25] (Theorem F, Proposition 8.2.2, and Theorem 8.2.3).
22.3 Truncation for a coordinate complete intersection
The complete-intersection theorem combines a differential calculation with a geometric multiplicity calculation. To make both visible, we give the full truncation argument for the coordinate origin in arbitrary dimension. The one external measure input will be the standard projective model-measure formula of Chapter 20. This case explains the signs, the extension of the current and the convergence of the truncated curvature without assuming a general extension theorem.
Let be complete, algebraically closed and nontrivially valued. Choose with , and put , . Write for the coordinates and for the -rational origin. On define Each is a finite Fubini–Study weight on the affine chart: it comes from the sections of . Theorem 20.8.1 makes it admissible for the local uniform smooth-potential calculus. The function has the same property locally on , because one coordinate is nonzero near each of its points.
NAG-900446 Proof review pending
Lemma 22.3.1. (Smooth forms near a rational point). Every original smooth function is locally constant near a -rational analytic point. Every original smooth form of positive total degree vanishes on some neighbourhood of that point. For forms in one fixed finite local presentation, the vanishing neighbourhood may be chosen independently of the smooth coefficient functions.
Proof. An original smooth presentation uses finitely many analytic units . At a -rational point , the number belongs to . Continuity gives a neighbourhood on which . The ultrametric equality then gives throughout that neighbourhood. Thus every tropical coordinate is constant there. Smooth scalar composites are constant and their positive-degree differential factors vanish. Taking the intersection for the finitely many coordinates proves the uniform statement for a fixed presentation. ◻
The lemma is particular to the original smooth sheaf. It is not an assertion about all continuous functions near a rational point, nor about every enlarged differential-form sheaf. It explains why some logarithmic extensions are easier on original tests than on stronger test classes.
NAG-900447 Proof review pending
Lemma 22.3.2. Let be the Gauss point of the closed polydisc . With the standard algebraic-degree normalization, Moreover in , and therefore these measures converge weakly on compactly supported continuous tests to .
Proof. The standard formal model of has irreducible special fibre of multiplicity one, and . The model-measure comparison therefore identifies its top Chern measure with the single Dirac mass at the standard Gauss point. Apply the projective automorphism The pullback weight in the frame is , and the inverse image of the standard Gauss point is . Functoriality for an analytic isomorphism proves the formula. This uses the model comparison, rather than inferring an analytic Dirac mass from a tropical vertex alone.
For a polynomial , The analytic topology of affine space is generated by these evaluations, so . Evaluation of a continuous compactly supported test then proves convergence of the Dirac masses. ◻
NAG-900448 Proof review pending
Theorem 22.3.3. The current on has a unique extension of bidegree to on original smooth tests. It satisfies Consequently is a zero-curvature Green current for the coordinate origin.
Proof. A compactly supported test for has bidegree . By Lemma 22.3.1, it vanishes on a neighbourhood of , so its support is a compact subset of . Pair it with the current already defined on . This defines on all such tests. On a fixed finite presentation the neighbourhood of vanishing is common to all coefficients, so continuity reduces to continuity of the current on . The inductive test topology then gives continuity on the full test space. If two extensions existed, their difference would be supported at ; every test vanishes near , so that difference would be zero.
Let be a smooth compactly supported scalar test. Its form vanishes near . On its compact support, has a strictly positive minimum. For all sufficiently large , the functions and therefore agree on a neighbourhood of this support. Locality of the admitted mixed product gives The second equality is the recursive mixed-product identity on the whole affine space, where is finite and admissible. Lemma 22.3.2 identifies the last term with , which tends to . The distributional convention gives , proving the theorem. ◻
The algebraic multiplicity that the coordinate proof does not supply
Replace the coordinate equations by with positive integers . Their common zero has the same underlying point, but the coordinate-ring quotient has basis and length . The complete-intersection current is therefore . This number is not recoverable from the support set alone. A proof for the logarithmic maximum of these powered functions must retain the degree of the finite monomial map or carry out an equivalent intersection calculation.
For a general regular sequence, the geometric fibre theorem performs this task, including nonreduced fibres and inseparable multiplicities. The coordinate proof above should therefore be read as a full proof of its stated case and an explanation of the general proof’s structure. It does not replace the variation-of-fibres theorem used in CLD25, nor the actual delta-form construction in Mihatsch.
There is a second distinction concerning tests. The extension in Theorem 22.3.3 was possible because original positive-degree tests vanish near a rational point. A theorem on all actual delta-form tests must verify its own extension and support statements; those tests need not satisfy the same vanishing lemma. Equality of the induced original currents does not by itself settle equality on the stronger test space.
References. [CLD25] (Theorem 18.7.2); [Mih24] (Theorem 5.5); [GK17] (Theorem 10.5). The proof above is restricted to the coordinate origin and explicitly uses the standard model-measure comparison.
22.4 Extension across a closed analytic subset
The coordinate proof extends because positive-degree original tests vanish near a rational point. In higher dimension the relevant inequality compares the test degree with the dimension of the removed analytic subset. It is the test degree, not the current degree, which controls this argument.
Let be a pure -dimensional boundaryless analytic space in the original CLD smooth-test category. Let be a closed analytic subset of dimension at most , and put . We use the following geometric input: for , restriction induces a topological isomorphism Its inverse extends tests by zero. In particular every such test on vanishes on a neighbourhood of . This is the smooth-test dimension argument underlying CLD25 Lemma 7.1.13, using its Lemmas 3.3.6 and 6.4.5. We retain the test bidegrees explicitly: the complementary indices in the last sentence of the printed proof of 7.1.13 must not replace the degrees of the tests actually being paired.
NAG-900449 Proof review pending
Proposition 22.4.1. If a current on has bidegree and , it has a unique extension to . It is given by If the same degree inequality holds for a differential of , then taking that differential commutes with this unique extension.
Proof. Take the continuous dual of the test-space isomorphism above with . This proves existence, continuity and uniqueness. For the second assertion, restriction of the differentiated extension agrees with the differential on . Uniqueness in its new degree therefore identifies it with the extension of that differential. The new-degree inequality is indispensable to this last step. ◻
For a codimension- subset, . A current of bidegree extends uniquely, since its tests have degree . Its has bidegree and tests of degree . The strict inequality has disappeared. A nonzero current supported on , such as , is now possible.
Example 22.4.2. On the punctured analytic line, has . Its original-current extension satisfies . Extending the zero current gives zero, whereas differentiating the extension gives . Thus an unqualified assertion that extension by zero commutes with differentiation is false when the relevant support condition fails in the differentiated degree.
22.5 The complete-intersection calculation with its geometric inputs
We now separate the analytic limiting argument from the geometric fibre comparison. Let define a pure codimension- analytic complete intersection in , and write The latter expression means on all of . Assume the continuous-potential products in this calculation are available with locality and the recursion Assume also the following geometric comparison on the full original test space: This is the substantive input. In CLD25 it is obtained by identifying truncated products with calibrated fibre currents in Corollary 18.6.2 and then applying the fibre comparison in Proposition 18.7.3. It includes the multiplicities of the complete intersection.
NAG-900450 Proof review pending
Theorem 22.5.1. Under these hypotheses, the unique original-current extension of satisfies .
Proof. Proposition 22.4.1 gives . Fix a compactly supported smooth test of degree . The form has degree and therefore vanishes near . Its support is a compact subset of . If is empty, all pairings below vanish. Otherwise the continuous function has a finite minimum on . Choose . By continuity and compactness, after decreasing if necessary, on a neighbourhood of . Locality gives Let tend to zero and use (22.5.1). The result is . Every original test of the required degree was allowed, so this is the asserted current identity. ◻
Only a finite lower bound for was used; the printed requirement that this bound be strictly positive is unnecessary and generally false. The small parameter is compared with , not with . This corrects both the truncation expression and the inequality used to make truncations agree on the test support.
What the fibre comparison must verify
CLD25 Theorem 14.7.2 is a theorem about compact analytic satisfying Serre’s condition , a regular -dimensional target, and a morphism purely of relative dimension . After fixing a moment map, it gives local constancy of the calibrated top-dimensional tropical fibre near a rigid target point. Its hypotheses should be retained when the theorem is used. In particular, the relative dimension in this application is , not .
If a fixed test has a finite chart decomposition to which this theorem applies, equality of calibrated fibres gives equality of its fibre integrals on each chart. Summing the chart contributions gives the desired equality for that test. The neighbourhood in the target may depend on the test and its chart decomposition. No uniform neighbourhood valid for every test is needed for weak convergence.
The reduction from a general regular sequence to those geometric hypotheses is not reproduced by the truncation calculation. In particular, Serre conditions concern localizations, not only the depth at one point. The present proof keeps the calibrated-fibre statement as an explicit input. It proves the complete analytic passage once that input is supplied, without claiming to have independently repaired every geometric reduction in the source.
Why extension uniqueness ends at the critical degree
For , the same extension argument applies in both degrees and . Thus locality and uniqueness give At the right-hand extension is no longer uniquely determined by its restriction to . The geometric fibre limit selects the missing contribution . This is the precise place where the analytic complete intersection, rather than only its complement, enters the Green identity.
References. [CLD25] (Lemma 7.1.13, Theorem 14.7.2, Corollary 18.6.2, and Section 18.7). The geometric inputs and the conditional analytic proof are distinguished above.
22.6 The algebra behind finite-flat multiplicities
The finite-flat step in a regular-immersion formula ensures that the same scheme-theoretic multiplicity appears on the zero fibre and on nearby tropical fibres. In the finite case, the relevant local flatness criterion has a short module-theoretic proof. This proof also shows why nilpotents must be retained.
NAG-900451 Proof review pending
Lemma 22.6.1. Let be a Noetherian regular local ring of dimension , with regular parameters . If a finite -module has this sequence as an -regular sequence, then is free. Its rank is
Proof. Induct on . If , the ring is a field. For , put . The quotient ring is regular local of dimension , and the remaining parameters are regular on . By induction, is free over , say of rank . Lift a basis to . Nakayama’s lemma makes the resulting map surjective. Let its kernel be , which is finite because is Noetherian.
Since is a nonzerodivisor on , one has , as follows from the two-term resolution of . Tensoring the exact sequence with gives The right-hand map is the chosen basis isomorphism, so . Nakayama gives , proving freeness. Reduction modulo identifies the rank. ◻
NAG-900452 Proof review pending
Corollary 22.6.2. (Finite miracle flatness). Let be a finite local homomorphism of Noetherian local rings, with regular, Cohen–Macaulay, and . Then is a finite free -module.
Proof. Parameters of generate an ideal whose quotient in is finite-dimensional over the residue field of , hence artinian. Their images therefore form a system of parameters of . In a Cohen–Macaulay local ring every system of parameters is regular. Apply Lemma 22.6.1 to the finite -module . ◻
The remaining commutative-algebra input is the system-of-parameters characterization of Cohen–Macaulay rings. In the analytic application, one must separately establish finiteness of the map and the dimension equality at the relevant points. The presence of a regular sequence somewhere in the source does not establish those geometric facts.
Example 22.6.3. (Equal dimensions without flatness). Let and . This is a finite local -algebra of dimension one. As an -module it is , so it is not flat: kills the nonzero element . Its generic fibre has dimension one over , while its special fibre has length two. The missing Cohen–Macaulay condition is detected by depth zero at the closed point.
Example 22.6.4. (Flatness retains nonreduced degree). In contrast, is free of rank two over , with basis . Every fibre has length two, although its reduced support has one point. Thus finite-flat degree counts scheme length, not the number of distinct points.
For a finite locally free morphism of rank , tensoring a local free basis with any residue field shows that every fibre algebra has dimension . This is the precise constancy used in a tropical weight comparison. It survives inseparability and nonreduced fibres. In a complete-intersection example in a regular coordinate ring, the zero-fibre quotient has basis with , hence length . The corresponding cycle in a Green identity must retain this multiplicity.
References. This is the finite-module proof of the local flatness criterion underlying [Mih24] (Proposition 3.13). Compare Stacks Project, Tags 00R4 and 07DY.
22.7 Regular sequences and the finite-flat comparison
The geometric input in the preceding truncation proof has an independent construction in Mihatsch’s Proposition 3.13. The decisive points are Abhyankar points of the complete intersection. At these points the ambient local ring has dimension exactly equal to the length of the regular sequence. This produces the Cohen–Macaulay hypothesis required for a finite-flat comparison. It does not require a Serre condition on an entire neighbourhood.
NAG-900453 Proof review pending
Lemma 22.7.1. Let be a Noetherian local ring of dimension . If is an -regular sequence, then is Cohen–Macaulay. In this situation, if a finite local homomorphism has regular local source of dimension and , then is flat over .
Proof. The sequence gives , whereas depth is at most dimension. Thus equality holds. For the second assertion, let be a regular system of parameters of . Finiteness makes artinian, so their images are a system of parameters of . Every system of parameters in a Cohen–Macaulay local ring is regular. Corollary 22.6.2 now applies. Equivalently this is the finite case of miracle flatness. The first assertion supplies the Cohen–Macaulay assumption used in the second. ◻
The dimension hypothesis cannot be replaced by the mere existence of a regular sequence. In particular, a regular sequence of length at one local ring does not imply that this ring satisfies at all its localizations. The following example makes the issue explicit.
Example 22.7.2. For any field and , put The elements form a regular sequence, but does not satisfy , hence does not satisfy . Its underlying spectrum is pure of dimension , and the quotient by the sequence is pure of dimension one.
Proof. A polynomial variable is a nonzerodivisor over any coefficient ring, and this remains true after successively quotienting by the previous variables and localizing. Thus the sequence is regular. The nilradical is and the reduced ring is the regular local ring , proving the dimension and purity assertions.
The nonzero class of has annihilator , a nonminimal prime. In this class remains nonzero and is killed by the maximal ideal. Hence , while . This violates . Every open neighbourhood of the closed point of contains its generization , so shrinking around that point does not remove the failure. ◻
This is a counterexample to the unrestricted commutative-algebra inference, not to the Green identity. It explains why the sentence in the proof of CLD25 Proposition 18.7.3 asserting a neighbourhood with needs justification beyond the regular sequence alone. Mihatsch instead makes the Cohen–Macaulay argument only at the relevant Abhyankar points, where the required dimension equality holds.
The openness theorem cited at this point, [Duc09] (Theorem 4.4), is a theorem about the locus where the local ring has the specified property; its definition is given in Section 3.4 of that source. Openness does not prove that the complete intersection lies in that locus. In Example 22.7.2, the depth at the closed maximal ideal is at least , but the local ring fails Serre’s condition because one of its localizations has depth zero and positive dimension. This distinction between one depth inequality and the ring condition is the missing commutative-algebra issue.
The weighted product near a regular immersion
Let be a pure -dimensional affinoid analytic space and let be defined by a regular sequence. Put , Choose a moment map . Write for its weighted tropicalization in the top dimension of ; lower-dimensional pieces of the set-theoretic image are not included in this notation.
NAG-900454 Open proof obligation
Theorem 22.7.3. (Mihatsch’s product theorem). For all sufficiently large , one has an equality of weighted top-dimensional polyhedra where the first factor has its standard lattice weight.
Open proof obligation (RC2). Establish the analytic moment-image, boundary dimension and finite-fibre properness inputs in the exact regular immersion scope; the proof takes them from Mihatsch Proposition 3.13.
The proof keeps the regular sequence until the finite-flat step, so it retains nonreduced multiplicities. Replacing by its reduced support before this step would generally change . The product structure is not a product decomposition of the analytic space, and it does not say that every local test is originally expressed in the coordinates . The latter issue is the reason for the refinement argument in the next section.
References. [Mih24] (Proposition 3.13 and its proof); [CLD25] (Theorem 14.7.2 and Proposition 18.7.3). The commutative-algebra inputs are the regular-sequence criterion for Cohen–Macaulayness and the local flatness criterion, Stacks Project, Tags 07DY and 00R4; Serre conditions are defined in Tag 031O.
22.8 The complete-intersection identity on delta-form tests
We now use Mihatsch’s analytic delta-sheaf , not the original smooth sheaf . The support theorem, integral and Stokes theorem are those of [Mih24] (Corollary 4.9, Definition 4.10 and Proposition 4.11). They are part of the input calculus. In particular, equality will be tested on every actual compactly supported delta-form of the indicated degree.
Let be pure of dimension and boundaryless, and let be a complete intersection of codimension . Distinguish the two open sets On , the function is finite and piecewise smooth. Near a point where some vanish, discard those indices: their valuations are larger than the finite minimum on a sufficiently small neighbourhood. The remaining functions are analytic units there and give a tropical presentation of . Thus is defined on the exact complement , not only on .
NAG-900455 Open proof obligation
Lemma 22.8.1. (The diagonal current). Let on , and let be the diagonal with primitive parameter . In the polyhedral delta-calculus,
Open proof obligation (RC2). Prove the fan computation with the stated diagonal support and coefficients; Mihatsch Lemma 5.7 is supplied.
Define the actual delta-form Its support is contained in the locus where all finite agree, hence in . On this locus it is the pullback of . Away from , . This last identity follows from the affine function on the closed diagonal and the differential rules in the delta-calculus.
Why one tropical presentation is insufficient
For an original smooth test, one can use a finite affinoid covering and inclusion–exclusion: the test is a pullback of a superform, and its high-degree restriction to lower-dimensional boundary images vanishes. For an arbitrary delta-form, its restriction to a skeleton can involve the other charts in its definition. The smooth argument cannot simply be repeated by replacing the letter with .
Fix . Near choose finitely many affinoid domains , moment maps and presentations of in their interiors. The support theorem puts on the top-dimensional skeleton of . Each such skeleton has finite fibres under its tropicalization. Shrinking the affinoids separates the relevant fibre points from the boundary. Choose a smooth partition of unity with support in these interiors and let , equal to one near .
NAG-900456 Open proof obligation
Lemma 22.8.2. (Local product identity with a cutoff). With these choices, let be the pushforward of from its skeleton under . For sufficiently large , and every polyhedral delta-form on , the corresponding pushforward upstairs, restricted to , is All restrictions to the skeletal domain and to are understood in this formula. Pushforward is taken only where the support is proper over the target.
Open proof obligation (RC2). Prove the supported cutoff product and its compact gluing step for actual delta tests; Mihatsch Lemma 5.8 is supplied.
NAG-900457 Open proof obligation
Theorem 22.8.3. (Complete-intersection Green identity). For every actual , In particular on the original smooth test space as well.
Open proof obligation (RC2). Prove degree vanishing for the actual supported delta tests after the cutoff; the proof applies Mihatsch equation (5.22).
This is the proof of [Mih24] (Theorem 5.5), reorganized around the product theorem, the cutoff refinement and the one-dimensional integral. It supplies the complete-intersection identity on the full stated test class. It does not solve a Green problem for an arbitrary higher-codimension cycle, where global regular-sequence equations need not exist. Nor does the proof descend an actual form through an alteration. Those are different geometric problems, discussed in Chapter 23.
22.9 The blow-up proof of Levine’s formula
We now prove the projective-space formula from the divisor identity and the degree of a projective-space fibre. This isolates the geometric step suppressed by the telescoping calculation on the complement. Work in the common algebraic setting of original GK, with algebraically closed, complete and nontrivially valued. Use its delta-metrics, intersection products, and proper pushforward of currents.
Let be the linear subspace , with . Denote the blow-up by and the resolved projection by . For , the blow-up in the Cartier divisor is the identity; the following formulas still apply.
NAG-900458 Proof review pending
Lemma 22.9.1. The blow-up is the incidence variety in defined by for . Its exceptional Cartier divisor satisfies
Proof. On an affine chart of , the ideal of is generated by the first affine coordinates. In the blow-up chart , set . Its equations are for . These are precisely the usual Rees-algebra charts of the blow-up of this coordinate ideal. They glue to the incidence variety. On , all the equations in the -coordinates disappear, giving the product description of . The pullback ideal becomes the invertible ideal , locally generated by . The sections of have common factor cutting out ; after dividing by it, they generate and define . Hence this line is , which is the asserted line-bundle identity. ◻
Give both hyperplane lines their standard model metrics and set , . The quotient metric on makes the Green function of its canonical section, outside , equal to This is an equality of norms, not just of curvatures: it follows by evaluating the quotient of the two maximum norms in a chart . Poincaré–Lelong therefore gives
NAG-900459 Proof review pending
Theorem 22.9.2. Put and define the current . Then On , it is represented by the formula of Section 22.1.
Proof. All factors of are closed delta-forms, so multiplication of the divisor equation and the current Leibniz rule give Here because it is pulled back from the -dimensional projective space. Proper pushforward commutes with the differential, and by the projection formula and the generic degree one of . It remains to compute the exceptional term. On , the form comes from and from the second factor. Pair with any complementary admitted test. The test also comes from after restriction to . If , the integrand has insufficient degree in the projective-space fibre, so its fibre integral is zero. For , the fibre integral of is . The remaining integral is exactly the test integral over . Hence . This proves the current identity. Outside , the map is an isomorphism, so the representative is the displayed one. The argument constructs a current globally and a specified form on the exact complement; it does not assert that arbitrary proper pushforward preserves actual delta-forms. ◻
The product structure of was essential to this short proof. For a general regular immersion, the exceptional divisor is the projectivized normal bundle, and pushing powers of its tautological class produces Segre classes. The linear-subspace formula cannot simply be copied with a general cycle substituted for . Such a generalization requires both the normal-cone intersection formulas and admissible Green representatives.
22.10 Metric variation and completion of local heights
The one-metric variation formula gives a simultaneous continuity theorem without differentiating singular functions. Fix line bundles on a proper -dimensional variety and fixed pseudodivisor data for which the initial local heights are defined. Suppose all metrics under consideration are semipositive, and the model or delta-metric height theory has symmetry and the one-metric variation formula.
NAG-900460 Proof review pending
Theorem 22.10.1. For two metric tuples , put and . Then Consequently local height extends uniquely to uniform limits of admitted semipositive metrics, with the fixed pseudodivisor data.
Proof. Replace the metrics one at a time, in the order . The th difference is the integral of the th weight difference against a mixed positive measure formed from the other metrics, some old and some new. Its mass is , since the underlying line bundles did not change. Its absolute value is at most . Sum the inequalities. For uniformly Cauchy metric sequences, the estimate makes the height sequence Cauchy. If two sequences have the same limiting metrics, their mutual distances tend to zero, so the estimate makes their height limits equal. This proves existence and independence of approximation. Uniqueness follows from density of the original metric class in its uniform completion. ◻
Remark 22.10.2. This is a completion theorem after a height theory has been constructed on a positive class. It is not a construction of arbitrary mixed measures from uniform convergence alone. Symmetry, positivity, the degree formula and the one-metric variation identity are the inputs that make the proof work. For signed integrable metrics, expand into differences of semipositive metrics or use a uniform total-variation bound; the signed total degree alone is insufficient.
From local metric variation to global height variation
For a global field with fixed product-formula weights , changing a metric only at finitely many places gives the sum of the local variations: For point heights the mixed measure is replaced by the normalized finite orbit measure. A change by a principal scalar has local weights ; the product formula makes the corresponding global sum zero. An arbitrary independent rescaling at each place does not have this cancellation. This is why local constants matter even though principal global changes leave heights unchanged.
References. [CLD25] (Theorem 18.7.5); [GK17] (Sections 7, 11–12); [GH]. The Levine proof uses only the stated divisor, projection and degree theorems after the explicit blow-up calculation.
22.11 Three meanings of a non-Archimedean Green object
The word Green is used for three different constructions in the recent literature. Their equations share some notation but their unknowns belong to different spaces. Keeping the categories explicit prevents a solution in one theory from being mistaken for a solution in another.
Model-theoretic currents
Dubocs works in the non-Archimedean Arakelov theory of Bloch–Gillet–Soulé. The ground data are an excellent discrete valuation ring and a proper smooth variety over its fraction field. Section 1.1 assumes the existence of regular proper flat models and common dominating regular models. These model hypotheses hold, for example, under the indicated resolution hypothesis; excellence alone is not stated to imply them. Forms and currents are built from bivariant intersection classes and Chow groups of models and their special fibres. They are not defined as continuous linear functionals on CLD test forms. Let be a metrized vector bundle of rank with a regular section whose zero scheme is . In [Dub26] (Theorem 4.1), blow up , let be the canonical exceptional section, and let be the tautological quotient with its induced metric. The constructed model current is The formula is useful because it expresses the higher-codimension Green current through an exceptional divisor and a quotient Chern class. When , Theorem 6.1 gives the corresponding Levine formula. Neither statement asserts that is an actual Mihatsch delta-form on . A comparison would have to define realization maps, match Chern classes and pushforwards, and verify the identity against the required analytic tests.
Monge–Ampère Green functions
A Green function in Boucksom–Jonsson’s pluripotential theory solves a nonlinear measure equation, for example with their normalized measure. It is a scalar psh potential. Their Theorem A shows that a divisorial Green function is PL in dimension one but need not be PL in higher dimension. More strongly, Theorem B constructs on a continuous potential whose Monge–Ampère measure has finite support in a dual complex, while the potential does not factor through the retraction of any SNC model. Thus a skeletal support theorem for a measure is not a skeletal factorization theorem for its potential. This result rules out a general shortcut from finitely many measure atoms to a potential on a finite skeleton. It does not contradict the comparison theorem in Section 16.8, where strong faithfulness, a pre-existing tropical solution and absolute continuity are additional hypotheses.
Actual forms for cycle equations
The strong Green problem considered here asks for an actual form of bidegree on the exact cycle complement, satisfying a linear identity against all admitted actual tests. Mihatsch’s complete-intersection result belongs to this third category. It has stronger representative and testing content than a current identity on original smooth tests, but retains its own geometric hypotheses. Dubocs’s construction and Monge–Ampère Green functions provide comparisons and possible methods; neither removes those hypotheses. For zero curvature one must also eliminate the curvature term or its analogue. Homological triviality of a cycle is not a construction of a primitive in the actual delta-sheaf. Section 24.15 supplies a relevant vanishing theorem on closed CLD tests; Sections 22.8 and 23.4 explain the additional representative and descent requirements.
References. [Dub26] (Section 1.1 and Theorems 4.1, 6.1); [BJ24] (Theorems A–B); [Mih24] (Theorem 5.5).